請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/104074完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 林恭如 | zh_TW |
| dc.contributor.advisor | Gong-Ru Lin | en |
| dc.contributor.author | 嚴孟城 | zh_TW |
| dc.contributor.author | Meng Cheng Yen | en |
| dc.date.accessioned | 2026-08-21T16:31:18Z | - |
| dc.date.available | 2026-08-22 | - |
| dc.date.copyright | 2026-08-21 | - |
| dc.date.issued | 2026 | - |
| dc.date.submitted | 2026-08-16 01:47:52 | - |
| dc.identifier.citation | [1] P. Lodahl, S. Mahmoodian, and S. Stobbe, "Interfacing single photons and single quantum dots with photonic nanostructures," Reviews of Modern Physics, vol. 87, no. 2, pp. 347–400, 2015.
[2] D. Sanvitto and S. Kéna-Cohen, "The road towards polaritonic devices," Nature materials, vol. 15, no. 10, pp. 1061–1073, 2016. [3] T. Byrnes, N. Y. Kim, and Y. Yamamoto, "Exciton–polariton condensates," Nature Physics, vol. 10, no. 11, pp. 803–813, 2014. [4] H. Deng, H. Haug, and Y. Yamamoto, "Exciton-polariton bose-einstein condensation," Reviews of modern physics, vol. 82, no. 2, pp. 1489–1537, 2010. [5] J. Kasprzak et al., "Bose–Einstein condensation of exciton polaritons," Nature, vol. 443, no. 7110, pp. 409–414, 2006. [6] H. Deng, G. Weihs, C. Santori, J. Bloch, and Y. Yamamoto, "Condensation of semiconductor microcavity exciton polaritons," Science, vol. 298, no. 5591, pp. 199–202, 2002. [7] R. Balili, V. Hartwell, D. Snoke, L. Pfeiffer, and K. West, "Bose-Einstein condensation of microcavity polaritons in a trap," Science, vol. 316, no. 5827, pp. 1007–1010, 2007. [8] A. Amo et al., "Superfluidity of polaritons in semiconductor microcavities," Nature Physics, vol. 5, no. 11, pp. 805–810, 2009. [9] A. Amo et al., "Collective fluid dynamics of a polariton condensate in a semiconductor microcavity," Nature, vol. 457, no. 7227, pp. 291–295, 2009. [10] G. Lerario et al., "Room-temperature superfluidity in a polariton condensate," Nature Physics, vol. 13, no. 9, pp. 837–841, 2017. [11] D. Ballarini et al., "All-optical polariton transistor," Nature communications, vol. 4, no. 1, p. 1778, 2013. [12] A. Graf, M. Held, Y. Zakharko, L. Tropf, M. C. Gather, and J. Zaumseil, "Electrical pumping and tuning of exciton-polaritons in carbon nanotube microcavities," Nature materials, vol. 16, no. 9, pp. 911–917, 2017. [13] Y. Wang, G. Adamo, S. T. Ha, J. Tian, and C. Soci, "Electrically Generated Exciton Polaritons with Spin On‐Demand," Advanced Materials, vol. 37, no. 8, p. 2412952, 2025. [14] Y. Wang, J. Tian, M. Klein, G. Adamo, S. T. Ha, and C. Soci, "Directional emission from electrically injected exciton–polaritons in perovskite metasurfaces," Nano Letters, vol. 23, no. 10, pp. 4431–4438, 2023. [15] S. Christopoulos et al., "Room-temperature polariton lasing in semiconductor microcavities," Physical review letters, vol. 98, no. 12, p. 126405, 2007. [16] S. Kéna-Cohen and S. Forrest, "Room-temperature polariton lasing in an organic single-crystal microcavity," Nature Photonics, vol. 4, no. 6, pp. 371–375, 2010. [17] P. Bhattacharya, T. Frost, S. Deshpande, M. Z. Baten, A. Hazari, and A. Das, "Room temperature electrically injected polariton laser," Physical review letters, vol. 112, no. 23, p. 236802, 2014. [18] J. R. Tischler, M. S. Bradley, V. Bulović, J. H. Song, and A. Nurmikko, "Strong coupling in a microcavity LED," Physical review letters, vol. 95, no. 3, p. 036401, 2005. [19] R. Jayaprakash et al., "A hybrid organic–inorganic polariton LED," Light: Science & Applications, vol. 8, no. 1, p. 81, 2019. [20] Z. Zhang et al., "Exciton-polariton light-emitting diode based on a ZnO microwire," Optics Express, vol. 25, no. 15, pp. 17375–17381, 2017. [21] J. Baumberg et al., "Parametric oscillation in a vertical microcavity: A polariton condensate or micro-optical parametric oscillation," Physical Review B, vol. 62, no. 24, p. R16247, 2000. [22] M. Saba et al., "High-temperature ultrafast polariton parametric amplification in semiconductor microcavities," Nature, vol. 414, no. 6865, pp. 731–735, 2001. [23] M. Sturge, "Optical absorption of gallium arsenide between 0.6 and 2.75 eV," Physical Review, vol. 127, no. 3, p. 768, 1962. [24] G. Bastard, E. Mendez, L. Chang, and L. Esaki, "Exciton binding energy in quantum wells," Physical Review B, vol. 26, no. 4, p. 1974, 1982. [25] J. Muth et al., "Absorption coefficient, energy gap, exciton binding energy, and recombination lifetime of GaN obtained from transmission measurements," Applied physics letters, vol. 71, no. 18, pp. 2572–2574, 1997. [26] A. Chernikov et al., "Exciton binding energy and nonhydrogenic Rydberg series in monolayer WS 2," Physical review letters, vol. 113, no. 7, p. 076802, 2014. [27] K. He et al., "Tightly bound excitons in monolayer WSe 2," Physical review letters, vol. 113, no. 2, p. 026803, 2014. [28] D. Reynolds, D. C. Look, B. Jogai, C. Litton, G. Cantwell, and W. Harsch, "Valence-band ordering in ZnO," Physical Review B, vol. 60, no. 4, p. 2340, 1999. [29] A. Teke et al., "Excitonic fine structure and recombination dynamics in single-crystalline ZnO," Physical Review B—Condensed Matter and Materials Physics, vol. 70, no. 19, p. 195207, 2004. [30] K. Tanaka, T. Takahashi, T. Ban, T. Kondo, K. Uchida, and N. Miura, "Comparative study on the excitons in lead-halide-based perovskite-type crystals CH3NH3PbBr3 CH3NH3PbI3," Solid state communications, vol. 127, no. 9-10, pp. 619–623, 2003. [31] V. D’innocenzo et al., "Excitons versus free charges in organo-lead tri-halide perovskites," Nature communications, vol. 5, no. 1, p. 3586, 2014. [32] F. Li et al., "Fabrication and characterization of a room-temperature ZnO polariton laser," Applied Physics Letters, vol. 102, no. 19, 2013. [33] H. Shan et al., "Spatial coherence of room-temperature monolayer WSe2 exciton-polaritons in a trap," Nature communications, vol. 12, no. 1, p. 6406, 2021. [34] C. Zou et al., "Continuous-wave perovskite polariton lasers," Science Advances, vol. 11, no. 2, p. eadr8826, 2025. [35] J. Gu, B. Chakraborty, M. Khatoniar, and V. M. Menon, "A room-temperature polariton light-emitting diode based on monolayer WS2," Nature nanotechnology, vol. 14, no. 11, pp. 1024–1028, 2019. [36] T. Wang et al., "Electrically pumped polarized exciton-polaritons in a halide perovskite microcavity," Nano Letters, vol. 22, no. 13, pp. 5175–5181, 2022. [37] A. Castellanos-Gomez et al., "Deterministic transfer of two-dimensional materials by all-dry viscoelastic stamping," 2D Materials, vol. 1, no. 1, p. 011002, 2014. [38] R. Frisenda et al., "Recent progress in the assembly of nanodevices and van der Waals heterostructures by deterministic placement of 2D materials," Chemical Society Reviews, vol. 47, no. 1, pp. 53–68, 2018. [39] A. Kavokin, I. Shelykh, and G. Malpuech, "Lossless interface modes at the boundary between two periodic dielectric structures," Physical Review B—Condensed Matter and Materials Physics, vol. 72, no. 23, p. 233102, 2005. [40] M. Kaliteevski et al., "Tamm plasmon-polaritons: Possible electromagnetic states at the interface of a metal and a dielectric Bragg mirror," Physical Review B—Condensed Matter and Materials Physics, vol. 76, no. 16, p. 165415, 2007. [41] S. Brand, M. Kaliteevski, and R. Abram, "Optical Tamm states above the bulk plasma frequency at a Bragg stack/metal interface," Physical Review B—Condensed Matter and Materials Physics, vol. 79, no. 8, p. 085416, 2009. [42] R. Chikkaraddy et al., "Single-molecule strong coupling at room temperature in plasmonic nanocavities," Nature, vol. 535, no. 7610, pp. 127–130, 2016. [43] J. Wang et al., "Room temperature coherently coupled exciton–polaritons in two-dimensional organic–inorganic perovskite," ACS nano, vol. 12, no. 8, pp. 8382–8389, 2018. [44] J. Feng et al., "All-optical switching based on interacting exciton polaritons in self-assembled perovskite microwires," Science Advances, vol. 7, no. 46, p. eabj6627, 2021. [45] R. Su et al., "Observation of exciton polariton condensation in a perovskite lattice at room temperature," Nature Physics, vol. 16, no. 3, pp. 301–306, 2020. [46] R. Su et al., "Room temperature long-range coherent exciton polariton condensate flow in lead halide perovskites," Science advances, vol. 4, no. 10, p. eaau0244, 2018. [47] E. T. Jaynes and F. W. Cummings, "Comparison of quantum and semiclassical radiation theories with application to the beam maser," Proceedings of the IEEE, vol. 51, no. 1, pp. 89–109, 1963. [48] J.-M. Raimond, M. Brune, and S. Haroche, "Manipulating quantum entanglement with atoms and photons in a cavity," Reviews of Modern Physics, vol. 73, no. 3, p. 565, 2001. [49] H. Walther, B. T. Varcoe, B.-G. Englert, and T. Becker, "Cavity quantum electrodynamics," Reports on Progress in Physics, vol. 69, no. 5, pp. 1325–1382, 2006. [50] G. Khitrova, H. Gibbs, M. Kira, S. W. Koch, and A. Scherer, "Vacuum Rabi splitting in semiconductors," Nature physics, vol. 2, no. 2, pp. 81–90, 2006. [51] C. Weisbuch, M. Nishioka, A. Ishikawa, and Y. Arakawa, "Observation of the coupled exciton-photon mode splitting in a semiconductor quantum microcavity," Physical review letters, vol. 69, no. 23, p. 3314, 1992. [52] I. Carusotto and C. Ciuti, "Probing microcavity polariton superfluidity through resonant Rayleigh scattering," Physical review letters, vol. 93, no. 16, p. 166401, 2004. [53] H. Deng, G. Weihs, D. Snoke, J. Bloch, and Y. Yamamoto, "Polariton lasing vs. photon lasing in a semiconductor microcavity," Proceedings of the National Academy of Sciences, vol. 100, no. 26, pp. 15318–15323, 2003. [54] H. Deng, G. S. Solomon, R. Hey, K. H. Ploog, and Y. Yamamoto, "Spatial coherence of a polariton condensate," Physical review letters, vol. 99, no. 12, p. 126403, 2007. [55] V. Savona, L. Andreani, P. Schwendimann, and A. Quattropani, "Quantum well excitons in semiconductor microcavities: Unified treatment of weak and strong coupling regimes," Solid State Communications, vol. 93, no. 9, pp. 733–739, 1995. [56] A. Delteil, T. Fink, A. Schade, S. Höfling, C. Schneider, and A. İmamoğlu, "Towards polariton blockade of confined exciton–polaritons," Nature materials, vol. 18, no. 3, pp. 219–222, 2019. [57] Y. Akahane, T. Asano, B.-S. Song, and S. Noda, "High-Q photonic nanocavity in a two-dimensional photonic crystal," nature, vol. 425, no. 6961, pp. 944–947, 2003. [58] D. Englund, A. Faraon, I. Fushman, N. Stoltz, P. Petroff, and J. Vučković, "Controlling cavity reflectivity with a single quantum dot," Nature, vol. 450, no. 7171, pp. 857–861, 2007. [59] K. Santhosh, O. Bitton, L. Chuntonov, and G. Haran, "Vacuum Rabi splitting in a plasmonic cavity at the single quantum emitter limit," Nature communications, vol. 7, no. 1, p. ncomms11823, 2016. [60] M. Sasin et al., "Tamm plasmon polaritons: Slow and spatially compact light," Applied physics letters, vol. 92, no. 25, 2008. [61] C. Symonds et al., "Confined Tamm plasmon lasers," Nano letters, vol. 13, no. 7, pp. 3179–3184, 2013. [62] E. Hecht, "Optics, 5th global edition," ed: Boston, 2017. [63] K. Srinivasan, M. Borselli, O. Painter, A. Stintz, and S. Krishna, "Cavity Q, mode volume, and lasing threshold in small diameter AlGaAs microdisks with embedded quantum dots," Optics express, vol. 14, no. 3, pp. 1094–1105, 2006. [64] E. M. Purcell, "Spontaneous emission probabilities at radio frequencies," in Confined electrons and photons: new physics and applications: Springer, 1995, pp. 839–839. [65] K. J. Vahala, "Optical microcavities," nature, vol. 424, no. 6950, pp. 839–846, 2003. [66] I. Tamm, "Über eine mögliche Art der Elektronenbindung an Kristalloberflächen," Zeitschrift für Physik, vol. 76, no. 11, pp. 849–850, 1932. [67] B. Auguié, M. C. Fuertes, P. C. Angelomé, N. L. Abdala, G. J. Soler Illia, and A. Fainstein, "Tamm plasmon resonance in mesoporous multilayers: toward a sensing application," Acs Photonics, vol. 1, no. 9, pp. 775–780, 2014. [68] C. Symonds et al., "High quality factor confined Tamm modes," Scientific reports, vol. 7, no. 1, p. 3859, 2017. [69] C. Symonds et al., "Confined Tamm plasmon light-emitting diodes," Applied Physics Letters, vol. 122, no. 26, 2023. [70] C.-C. Chang, T.-Y. Chen, T.-W. Lin, J. Leng, K. Tamada, and Y.-J. Lee, "Flexible and ultranarrow transmissive color filters by simultaneous excitations of triple resonant eigenmodes in hybrid metallic–optical Tamm state devices," ACS Photonics, vol. 8, no. 2, pp. 540–549, 2020. [71] Z. Wang, J. K. Clark, Y.-L. Ho, S. Volz, H. Daiguji, and J.-J. Delaunay, "Ultranarrow and wavelength-tunable thermal emission in a hybrid metal–optical tamm state structure," ACS photonics, vol. 7, no. 6, pp. 1569–1576, 2020. [72] S. D. Stranks and H. J. Snaith, "Metal-halide perovskites for photovoltaic and light-emitting devices," Nature nanotechnology, vol. 10, no. 5, pp. 391–402, 2015. [73] L. Protesescu et al., "Nanocrystals of cesium lead halide perovskites (CsPbX3, X= Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color gamut," Nano letters, vol. 15, no. 6, pp. 3692–3696, 2015. [74] Y. Cao et al., "Perovskite light-emitting diodes based on spontaneously formed submicrometre-scale structures," Nature, vol. 562, no. 7726, pp. 249–253, 2018. [75] M. Rodová, J. Brožek, K. Knížek, and K. Nitsch, "Phase transitions in ternary caesium lead bromide," Journal of thermal analysis and calorimetry, vol. 71, no. 2, pp. 667–673, 2003. [76] C. C. Stoumpos et al., "Crystal growth of the perovskite semiconductor CsPbBr3: a new material for high-energy radiation detection," Crystal growth & design, vol. 13, no. 7, pp. 2722–2727, 2013. [77] M. V. Kovalenko, L. Protesescu, and M. I. Bodnarchuk, "Properties and potential optoelectronic applications of lead halide perovskite nanocrystals," Science, vol. 358, no. 6364, pp. 745–750, 2017. [78] R. J. Sutton et al., "Bandgap‐tunable cesium lead halide perovskites with high thermal stability for efficient solar cells," Advanced Energy Materials, vol. 6, no. 8, p. 1502458, 2016. [79] J. Satta, A. Casu, D. Chiriu, C. M. Carbonaro, L. Stagi, and P. C. Ricci, "Formation mechanisms and phase stability of solid-state grown cspbi3 perovskites," Nanomaterials, vol. 11, no. 7, p. 1823, 2021. [80] M. Pols, A. C. van Duin, S. Calero, and S. Tao, "Mixing I and Br in inorganic perovskites: atomistic insights from reactive molecular dynamics simulations," The Journal of Physical Chemistry C, vol. 128, no. 9, pp. 4111–4118, 2024. [81] Z. Li, J.-S. Park, and A. Walsh, "Evolutionary exploration of polytypism in lead halide perovskites," Chemical Science, vol. 12, no. 36, pp. 12165–12173, 2021. [82] J. Kang and L.-W. Wang, "High defect tolerance in lead halide perovskite CsPbBr3," The journal of physical chemistry letters, vol. 8, no. 2, pp. 489–493, 2017. [83] F. Krieg et al., "Colloidal CsPbX3 (X= Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability," ACS energy letters, vol. 3, no. 3, pp. 641–646, 2018. [84] J. De Roo et al., "Highly dynamic ligand binding and light absorption coefficient of cesium lead bromide perovskite nanocrystals," ACS nano, vol. 10, no. 2, pp. 2071–2081, 2016. [85] L. Dou et al., "Solution-processed hybrid perovskite photodetectors with high detectivity," Nature communications, vol. 5, no. 1, p. 5404, 2014. [86] W. Deng et al., "Aligned Single-Crystalline Perovskite Microwire Arrays for High-Performance Flexible Image Sensors with Long-Term Stability," Advanced Materials (Deerfield Beach, Fla.), vol. 28, no. 11, pp. 2201–2208, 2016. [87] Z.-K. Tan et al., "Bright light-emitting diodes based on organometal halide perovskite," Nature nanotechnology, vol. 9, no. 9, pp. 687–692, 2014. [88] J. Song, J. Li, X. Li, L. Xu, Y. Dong, and H. Zeng, "Quantum Dot Light-Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)," Advanced Materials (Deerfield Beach, Fla.), vol. 27, no. 44, pp. 7162–7167, 2015. [89] A. Kojima, K. Teshima, Y. Shirai, and T. Miyasaka, "Organometal halide perovskites as visible-light sensitizers for photovoltaic cells," Journal of the american chemical society, vol. 131, no. 17, pp. 6050–6051, 2009. [90] M. A. Green et al., "Solar cell efficiency tables (version 65)," Progress in photovoltaics: research and applications, vol. 33, no. 1, pp. 3–15, 2025. [91] G. Xing et al., "Low-temperature solution-processed wavelength-tunable perovskites for lasing," Nature materials, vol. 13, no. 5, pp. 476–480, 2014. [92] S. Yakunin et al., "Low-threshold amplified spontaneous emission and lasing from colloidal nanocrystals of caesium lead halide perovskites," Nature communications, vol. 6, no. 1, p. 8056, 2015. [93] C.-Y. Huang et al., "CsPbBr3 perovskite quantum dot vertical cavity lasers with low threshold and high stability," Acs Photonics, vol. 4, no. 9, pp. 2281–2289, 2017. [94] C.-S. Wu et al., "Hemispherical cesium lead bromide perovskite single-mode microlasers with high-quality factors and strong Purcell enhancement," ACS Applied Materials & Interfaces, vol. 13, no. 11, pp. 13556–13564, 2021. [95] B. Hwang and J.-S. Lee, "Hybrid organic-inorganic perovskite memory with long-term stability in air," Scientific reports, vol. 7, no. 1, p. 673, 2017. [96] Y. Wang et al., "Synergies of electrochemical metallization and valance change in all‐inorganic perovskite quantum dots for resistive switching," Advanced materials, vol. 30, no. 28, p. 1800327, 2018. [97] M.-C. Yen et al., "All-inorganic perovskite quantum dot light-emitting memories," Nature communications, vol. 12, no. 1, p. 4460, 2021. [98] A. Swarnkar et al., "Quantum dot–induced phase stabilization of α-CsPbI3 perovskite for high-efficiency photovoltaics," Science, vol. 354, no. 6308, pp. 92–95, 2016. [99] X. Li et al., "CsPbX3 quantum dots for lighting and displays: room‐temperature synthesis, photoluminescence superiorities, underlying origins and white light‐emitting diodes," Advanced Functional Materials, vol. 26, no. 15, pp. 2435–2445, 2016. [100] W.-J. Yin, J.-H. Yang, J. Kang, Y. Yan, and S.-H. Wei, "Halide perovskite materials for solar cells: a theoretical review," Journal of Materials Chemistry A, vol. 3, no. 17, pp. 8926–8942, 2015. [101] J. Pan et al., "Highly efficient perovskite-quantum-dot light-emitting diodes by surface engineering," 2016. [102] A. Swarnkar, R. Chulliyil, V. K. Ravi, M. Irfanullah, A. Chowdhury, and A. Nag, "Colloidal CsPbBr3 perovskite nanocrystals: luminescence beyond traditional quantum dots," Angewandte Chemie, vol. 127, no. 51, pp. 15644–15648, 2015. [103] R. Su et al., "Room-temperature polariton lasing in all-inorganic perovskite nanoplatelets," Nano letters, vol. 17, no. 6, pp. 3982–3988, 2017. [104] W. Du et al., "Strong exciton–photon coupling and lasing behavior in all-inorganic CsPbBr3 micro/nanowire Fabry-Pérot cavity," Acs Photonics, vol. 5, no. 5, pp. 2051–2059, 2018. [105] P. Bouteyre et al., "Room-temperature cavity polaritons with 3D hybrid perovskite: toward large-surface polaritonic devices," ACS photonics, vol. 6, no. 7, pp. 1804–1811, 2019. [106] C. Bujalance et al., "Strong light–matter coupling in lead halide perovskite quantum dot solids," ACS nano, vol. 18, no. 6, pp. 4922–4931, 2024. [107] P. Savvidis, J. Baumberg, R. Stevenson, M. Skolnick, D. Whittaker, and J. Roberts, "Angle-resonant stimulated polariton amplifier," Physical review letters, vol. 84, no. 7, p. 1547, 2000. [108] J. Wu, S. Ghosh, R. Su, A. Fieramosca, T. C. Liew, and Q. Xiong, "Nonlinear parametric scattering of exciton polaritons in perovskite microcavities," Nano Letters, vol. 21, no. 7, pp. 3120–3126, 2021. [109] J. Wu et al., "Perovskite polariton parametric oscillator," Advanced Photonics, vol. 3, no. 5, pp. 055003–055003, 2021. [110] J. Zhao et al., "Nonlinear polariton parametric emission in an atomically thin semiconductor based microcavity," Nature Nanotechnology, vol. 17, no. 4, pp. 396–402, 2022. [111] M. Kędziora et al., "Predesigned perovskite crystal waveguides for room-temperature exciton–polariton condensation and edge lasing," Nature Materials, vol. 23, no. 11, pp. 1515–1522, 2024. [112] N. V. Glebov et al., "Room-temperature exciton-polariton-driven self-phase modulation in planar perovskite waveguides," ACS nano, vol. 19, no. 14, pp. 14097–14106, 2025. [113] K. Tyszka et al., "Leaky Integrate‐and‐Fire Mechanism in Exciton–Polariton Condensates for Photonic Spiking Neurons," Laser & Photonics Reviews, vol. 17, no. 1, p. 2100660, 2023. [114] K. Tyszka, A. Opala, and B. Piętka, "Advancing optical spiking neural networks with exciton-polaritons," Journal of Physics: Photonics, vol. 7, no. 4, p. 041002, 2025. [115] S. Tsintzos, N. Pelekanos, G. Konstantinidis, Z. Hatzopoulos, and P. Savvidis, "A GaAs polariton light-emitting diode operating near room temperature," Nature, vol. 453, no. 7193, pp. 372–375, 2008. [116] D. Bajoni et al., "Polariton light-emitting diode in a GaAs-based microcavity," Physical Review B—Condensed Matter and Materials Physics, vol. 77, no. 11, p. 113303, 2008. [117] C. Schneider et al., "An electrically pumped polariton laser," Nature, vol. 497, no. 7449, pp. 348–352, 2013. [118] P. Bhattacharya, B. Xiao, A. Das, S. Bhowmick, and J. Heo, "Solid state electrically injected exciton-polariton laser," Physical review letters, vol. 110, no. 20, p. 206403, 2013. [119] J. Leng, T. Wang, Z.-K. Tan, Y.-J. Lee, C.-C. Chang, and K. Tamada, "Tuning the emission wavelength of lead halide perovskite NCs via size and shape control," ACS omega, vol. 7, no. 1, pp. 565–577, 2021. [120] X. Li et al., "Transfer of large-area graphene films for high-performance transparent conductive electrodes," Nano letters, vol. 9, no. 12, pp. 4359–4363, 2009. [121] J. W. Suk et al., "Transfer of CVD-grown monolayer graphene onto arbitrary substrates," ACS nano, vol. 5, no. 9, pp. 6916–6924, 2011. [122] S. Maeng et al., "Direct photocatalytic patterning of colloidal emissive nanomaterials," Science Advances, vol. 9, no. 33, p. eadi6950, 2023. [123] R. J. Elliott, "Intensity of optical absorption by excitons," Physical Review, vol. 108, no. 6, p. 1384, 1957. [124] M. Saba et al., "Correlated electron–hole plasma in organometal perovskites," Nature communications, vol. 5, no. 1, p. 5049, 2014. [125] N. Lundt et al., "Room-temperature Tamm-plasmon exciton-polaritons with a WSe2 monolayer," Nature communications, vol. 7, no. 1, p. 13328, 2016. [126] J. A. Kurvits, M. Jiang, and R. Zia, "Comparative analysis of imaging configurations and objectives for Fourier microscopy," Journal of the Optical Society of America A, vol. 32, no. 11, pp. 2082–2092, 2015. [127] M. Oda, Y. Obara, K. Saito, K. Higashi, and T. Tani, "Fabrication, characterization and its local reflection properties of a metal-mirror microcavity with high concentrated PIC J-aggregates," Physics Procedia, vol. 3, no. 4, pp. 1615–1620, 2010. [128] X. Liang et al., "Toward clean and crackless transfer of graphene," ACS nano, vol. 5, no. 11, pp. 9144–9153, 2011. [129] S. Bae et al., "Roll-to-roll production of 30-inch graphene films for transparent electrodes," Nature nanotechnology, vol. 5, no. 8, pp. 574–578, 2010. [130] C. Perumal Veeramalai, S. Feng, X. Zhang, S. Pammi, V. Pecunia, and C. Li, "Lead–halide perovskites for next-generation self-powered photodetectors: a comprehensive review," Photonics Research, vol. 9, no. 6, pp. 968–991, 2021. [131] B. Bayer, "Color imaging array," United States Patent, no. 3971065, 1976. [132] S. Lee et al., "Inverse design of color routers in CMOS image sensors: Toward minimizing interpixel crosstalk," Nanophotonics, vol. 13, no. 20, pp. 3895–3914, 2024. [133] H. Algadi, C. Mahata, B. Sahoo, M. Kim, W.-G. Koh, and T. Lee, "Facile method for the preparation of high-performance photodetectors with a GQDs/perovskite bilayer heterostructure," Organic Electronics, vol. 76, p. 105444, 2020. [134] A. Suhail, A. Saini, S. Beniwal, and M. Bag, "Tunable optoelectronic properties of CsPbBr3 perovskite nanocrystals for photodetectors applications," The Journal of Physical Chemistry C, vol. 127, no. 34, pp. 17298–17306, 2023. [135] K. Chen et al., "Solution‐Processed CsPbBr3 Quantum Dots/Organic Semiconductor Planar Heterojunctions for High‐Performance Photodetectors," Advanced Science, vol. 9, no. 12, p. 2105856, 2022. [136] C. Zhao et al., "Transparent CsPbBr3 quantum dot photodetector with a vertical transistor structure," ACS Applied Electronic Materials, vol. 3, no. 1, pp. 337–343, 2020. [137] L. Jin et al., "Light-induced pyroelectric property of self-powered photodetectors based on all-inorganic perovskite quantum dots," Nanotechnology, vol. 32, no. 23, p. 235203, 2021. [138] Y. Dong et al., "Improving all‐inorganic perovskite photodetectors by preferred orientation and plasmonic effect," small, vol. 12, no. 40, pp. 5622–5632, 2016. [139] Y.-J. Lee, C.-J. Lee, and C.-H. Chen, "Determination of junction temperature in InGaN and AlGaInP light-emitting diodes," IEEE Journal of Quantum Electronics, vol. 46, no. 10, pp. 1450–1455, 2010. [140] Y.-J. Lee, C.-J. Lee, and C.-H. Chen, "Effect of surface texture and backside patterned reflector on the AlGaInP light-emitting diode: high extraction of waveguided light," IEEE Journal of Quantum Electronics, vol. 47, no. 5, pp. 636–641, 2011. [141] H. Alnatah et al., "Bose–Einstein condensation of polaritons at room temperature in a GaAs/AlGaAs structure," ACS photonics, vol. 12, no. 1, pp. 48–52, 2024. | - |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/104074 | - |
| dc.description.abstract | Tamm 電漿子（TPs）微共振腔結構因其在金屬–介電質界面形成的超小有效模態體積與強電場侷限特性，提供了一個在室溫下實現強光–物質耦合的理想平台。本研究將單層全無機鈣鈦礦量子點（CsPbBr₃ QDs）嵌入 TP 微腔中，系統性地從基礎極化子物理出發，逐步推展至功能性光電元件之實現，涵蓋三項相互關聯之研究成果。(1) 研究於嵌入單層 CsPbBr₃ QDs 之 TP 微腔中，在室溫條件下驗證激子極化子的形成。將亞波長厚度之 QD 單層嵌入TPs 共振模態之超小有效模態體積，使光子–激子耦合強度大幅提升，獲得 ℏΩ=127.5 meV 之 Rabi 分裂能，遠超強耦合閾值。同時，透過調控 PMMA 緩衝層厚度，可系統性地改變激子–光子失諧量，進而調控極化子之色散關係。偏振分辨量測結果顯示，圓偏振與線偏振激發下之極化子–極化子交互作用常數分別為 gc~8.7ueV um²與gL~4.1 ueV um²，確立本平台作為室溫極化子自旋光子學之可行基礎。(2) 研究利用 TP 共振增強之電場侷限效應，實現以 CsPbBr₃ QD 為基礎之無色彩濾光片影像感測器。將 TPs 本徵模態與 QDs 激子吸收峰進行光譜匹配，可獲得光學吸收率 14 倍之提升，最大光響應度達 20.61 mA W⁻¹，且 TP 結構固有之波長選擇性使傳統色彩濾光片得以省略。採用 Bayer 濾光片陣列設計涵蓋 λ = 480、520 及 550 nm 三種共振波長，驗證多像素彩色影像感測之可擴展性。此外，引入 PMMA 載子捕捉中間層賦予元件神經形態突觸可塑性，並透過 64×64 光偵測器陣列模擬人臉辨識，辨識率超過 80%。(3)研究實現首個基於單層鈣鈦礦 QD TP 微腔之室溫電驅動激子極化子發光二極體。ℏΩ=124.3 meV 之 Rabi 分裂與 Fp=3.44 之 Purcell 增強因子，確認電驅動操作下之強耦合與腔體增強自發輻射。動量分辨電激發光映射提供電注入下極化子色散之直接實驗證據。相較於光激發下瓶頸效應隨泵浦功率逐漸消除，電注入下極化子瓶頸效應持續存在，指出載子熱化為邁向電驅動極化子凝聚之關鍵瓶頸。三項研究成果共同確立了嵌入單層 CsPbBr₃ QDs 之 Tamm 電漿子微腔作為多功能、可擴展且與製程相容之整合平台，涵蓋室溫極化子物理、共振增強感測及電驅動發光等應用領域，為未來室溫極化子雷射、自旋極化光源及神經形態光子電路之發展奠定堅實基礎。 | zh_TW |
| dc.description.abstract | Tamm-plasmon (TPs) microcavities, with their ultrasmall mode volumes and strong field confinement at the metal–dielectric interface, provide an ideal platform for room-temperature strong light–matter coupling. Here, a single monolayer of CsPbBr₃ quantum dots (QDs) is embedded in a TP microcavity, with the study progressing from fundamental polariton physics to functional optoelectronic devices across three interrelated contributions. (1) Room-temperature exciton-polariton formation is first demonstrated, with the subwavelength QD monolayer coupled to the TP's ultrasmall mode volume yielding a Rabi splitting of ℏΩ=127.5 meV, well above the strong-coupling threshold. Tuning the PMMA spacer thickness varies the exciton–photon detuning and thus the polariton dispersion, while polarization-resolved measurements give polariton–polariton interaction constants of gc~8.7ueV um² (circular) and gL~4.1 ueV um² (linear), establishing this platform for room-temperature polariton spin photonics. (2) The TP-enhanced field confinement is then used to realize a color-filter-free CsPbBr₃ QD image sensor: tuning the TP mode to the QD exciton absorption peak gives a 14-fold absorption enhancement and a maximum responsivity of 20.61 mA W⁻¹, while the TP's intrinsic wavelength selectivity removes the need for conventional color filters. A Bayer-pattern TP array (λ = 480, 520, 550 nm) validates scalable multi-pixel color sensing, and a PMMA charge-trapping layer adds neuromorphic synaptic plasticity, enabling facial recognition via a 64x64 photodetector array with over 80% accuracy. (3) Finally, the first room-temperature, electrically driven exciton-polariton LED based on this platform is realized, showing a Rabi splitting of ℏΩ=124.3 meV and a Purcell factor of Fp=3.44 that confirm strong coupling and cavity-enhanced emission under electrical operation. Momentum-resolved electroluminescence directly reveals the polariton dispersion under electrical injection, and unlike optical excitation—where the polariton bottleneck relaxes with pump power—it persists electrically, identifying carrier thermalization as the key barrier to electrically driven polariton condensation. Together, these results establish the CsPbBr₃ QD-embedded TP microcavity as a scalable, process-compatible platform spanning room-temperature polariton physics, resonance-enhanced sensing, and electrical light emission, laying groundwork for future polariton lasers, spin-polarized sources, and neuromorphic photonic circuits. | en |
| dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2026-08-21T16:31:18Z No. of bitstreams: 0 | en |
| dc.description.provenance | Made available in DSpace on 2026-08-21T16:31:18Z (GMT). No. of bitstreams: 0 | en |
| dc.description.tableofcontents | 致謝 ....................................................................................................................................................... I
摘要 .................................................................................................................................................... III ABSTRACT ........................................................................................................................................ V CONTENTS ..................................................................................................................................... VII LIST OF TABLES: .......................................................................................................................... IX LIST OF FIGURES: .......................................................................................................................... X CHAPTER 1 INTRODUCTION ........................................................................................................ 1 1.1 BACKGROUND OF MICROCAVITY EXCITON-POLARITONS ........................................................... 1 1.2 RESEARCH MOTIVATION ............................................................................................................. 4 CHAPTER 2 FUNDAMENTALS ...................................................................................................... 5 2.1 EXCITON-POLARITON .................................................................................................................. 5 2.2 MICROCAVITY ........................................................................................................................... 11 2.2.1 Optical Microcavity ........................................................................................................... 12 2.2.2 Tamm plasmons ................................................................................................................ 17 2.3 PEROVSKITES QUANTUM DOTS (PQDS) ..................................................................................... 28 2.4 EXCITON-POLARITON DEVICE .................................................................................................... 35 2.4.1 Optical-Domain Exciton-polariton device ........................................................................ 35 2.4.2 Electrical Driven Exciton-polariton device ....................................................................... 43 CHAPTER 3 MATERIAL SYNTHESIS AND EXPERIMENT METHOD ............................... 51 3.1 PEROVSKITE QUANTUM DOTS SYNTHESIS ................................................................................ 52 3.2 DISTRIBUTION BRAGG REFLECTOR (DBR) FABRICATION ........................................................ 53 3.3 ROOM TEMPERATURE TAMM-PLASMON POLARITON SAMPLE FABRICATION ........................... 54 3.4 TAMM PLASMON PHOTODETECTOR FABRICATION FOR COLOR-FILTER-FREE IMAGE SENSING......................................................................................................................................................... 56 3.5 TAMM PLASMONS EXCITON-POLARITON LIGHT EMITTING DIODE FABRICATION .................... 59 3.6 NUMERICAL EXTRACTION OF EXCITON BINDING ENERGY BY ELLIOTT MODEL ...................... 61 3.7 THEORETICAL MODELING OF EXCITON-POLARITON EMISSION ................................................ 64 3.8 MOMENTUM-RESOLVED FOURIER IMAGING SETUP .................................................................. 66 CHAPTER 4 RESULTS AND DISCUSSION ................................................................................ 70 4.1 PEROVSKITE QUANTUM DOTS CHARACTERISTICS .................................................................... 70 4.1.1 Material Characterization of CsPbBr₃ Quantum Dots ....................................................... 71 4.1.2 Surface Morphology of the CsPbBr₃ Quantum Dot Thin Film ......................................... 73 4.1.3 Exciton Binding Energy Determined via the Elliott Framework ...................................... 74 4.1.4 Work Function and Band Edge Positions from Ultraviolet Photoelectron Spectroscopy(UPS) .......................................................................................................................................... 75 4.1.5 Optical Constants (n, k) from Spectroscopic Ellipsometry ............................................... 77 4.1.6 Optical Characterization of Patterned CsPbBr₃ QD Arrays .............................................. 78 4.2 STRONG LIGHT-MATTER COUPLING IN SINGLE-MONOLAYERED CSPBBR₃ 。 QUANTUM DOTS VIATAMM-PLASMON CAVITY ............................................................................................................... 81 4.2.1 Device Design and Simulation .......................................................................................... 81 4.2.2 Tamm-Plasmon Mode Confirmation and Strong Coupling .............................................. 84 4.2.3 Detuning Control via PMMA Spacer Thickness ............................................................... 88 4.2.4 Spin-Dependent Polariton–Polariton Interactions ............................................................. 92 4.3 RESONANCE-ENHANCED CSPBBR₃ QUANTUM DOT TAMM-PLASMON PHOTODETECTORS FOR COLOR-FILTER-FREE IMAGE SENSING............................................................................................ 95 4.3.1 Device Design and Simulation .......................................................................................... 96 4.3.2 Energy Band Alignment and Carrier Transport .............................................................. 100 4.3.3 Structural Characterization .............................................................................................. 101 4.3.4 Optical Characteristics of the TP Photodetector ............................................................. 105 4.3.5 Photoresponse Performance and Color Selectivity ......................................................... 107 4.3.6 Bayer Filter Pattern and Multi-Pixel Integration ............................................................. 112 4.3.7 Neuromorphic Synaptic Functionality and Image Recognition ...................................... 115 4.4 ROOM-TEMPERATURE ELECTRICALLY DRIVEN EXCITON-POLARITONS IN MONOLAYER CSPBBR₃ QUANTUM DOT TAMM-PLASMON LEDS ....................................................................... 122 4.4.1 TP Polariton LED Device Design and Simulation .......................................................... 123 4.4.2 TP Polariton LED Structural and Material Characterization .......................................... 126 4.4.3 Strong Coupling Confirmation and Polariton Dynamics ................................................ 128 4.4.4 Electrical Characterization and Electroluminescence ..................................................... 132 CHAPTER 5 CONCLUSION ........................................................................................................ 140 REFERENCE .................................................................................................................................. 142 | - |
| dc.language.iso | en | - |
| dc.subject | 光與物質交互作用 | - |
| dc.subject | Tamm 電漿⼦ | - |
| dc.subject | 鈣鈦礦量⼦點 | - |
| dc.subject | 波賽爾效應 | - |
| dc.subject | 極化⼦ 發光元件 | - |
| dc.subject | Strong light-matter coupling | - |
| dc.subject | Tamm plasmon | - |
| dc.subject | Perovskite quantum dots | - |
| dc.subject | Purcell effect | - |
| dc.subject | Polariton LED | - |
| dc.title | 鈣鈦礦量⼦點塔米電漿極化⼦由強耦合⾄元件實現 | zh_TW |
| dc.title | Tamm-Plasmon Polaritons in Perovskite Quantum Dots: From Strong Coupling to Device Realization | en |
| dc.type | Thesis | - |
| dc.date.schoolyear | 114-2 | - |
| dc.description.degree | 博士 | - |
| dc.contributor.coadvisor | 李亞儒 | zh_TW |
| dc.contributor.coadvisor | Ya-Ju Lee | en |
| dc.contributor.oralexamcommittee | 黃建璋;蕭惠心;陳瑞山;林文欽 | zh_TW |
| dc.contributor.oralexamcommittee | JianJang Huang;Hui-Hsin Hsiao;Ruei-San Chen;Wen-Chin Lin | en |
| dc.subject.keyword | 光與物質交互作用; Tamm 電漿⼦; 鈣鈦礦量⼦點; 波賽爾效應; 極化⼦ 發光元件 | zh_TW |
| dc.subject.keyword | Strong light-matter coupling; Tamm plasmon; Perovskite quantum dots; Purcell effect; Polariton LED | en |
| dc.relation.page | 153 | - |
| dc.identifier.doi | 10.6342/NTU202604323 | - |
| dc.rights.note | 同意授權(全球公開) | - |
| dc.date.accepted | 2026-08-19 | - |
| dc.contributor.author-college | 電機資訊學院 | - |
| dc.contributor.author-dept | 光電工程學研究所 | - |
| dc.date.embargo-lift | 2031-08-12 | - |
| 顯示於系所單位： | 光電工程學研究所 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-114-2.pdf 此日期後於網路公開 2031-08-12 | 55.17 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。