NTU Theses and Dissertations Repository: Browsing DSpace

Browsing by Advisor Liang-Chia Chen

Jump to: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
or enter first few letters:

Showing results 1 to 11 of 11

Publication Year	Title	Author(s)	Department
2021	以多維影像融合進行表面邊緣重建與關鍵尺寸量測 Multi-dimensional image fusion for surface edge reconstruction and critical dimension measurement	陳俞安; Yu-An Chen	機械工程學系
2024	光學精密量測結合機械手臂應用於直接能量沉積製程中量測與品質提升研究 Research on In-Cycle Gauging and Quality Enhancement in Direct Energy Deposition Using Optical Metrology with Robotic Arm Scanning Strategy	洪瑞澤; Jui-Tse Hung	機械工程學系
2024	基於全局敏感度分析之次微米高深寬結構關鍵尺寸光學量測系統設計最佳化研究 Optimization Study of Optical Measurement System Design for Critical Dimension in Submicron High Aspect Ratio Structures Based on Global Sensitivity Analysis	洪彥鴻; Yen-Hung Hung	機械工程學系
2022	基於四波橫向剪切干涉術與結構光調制之微分干涉對比顯微術之研究 Research on Differential Interference Contrast（DIC）Microscopy Based on Quadriwave Lateral Shearing Interferometry and Structured-Light Modulation	楊浩麾; Haohui Yang	機械工程學系
2023	基於波長調制微型化雷射干涉之長行程精密位移量測系統研發 Development of a Miniaturized Wavelength-modulation-based Laser Interferometric system for Long-range Precision Displacement Measurement	廖承鈺; Chen-Yu Liao	機械工程學系
2023	基於深度學習的維納反捲積方法應用於彩色共焦顯微術之光學解析度提升 Enhancing Optical Resolution in Chromatic Confocal Microscopy: A Deep Learning-Based Wiener Deconvolution Approach	盛杉奕; Sanjeev Kumar Singh	機械工程學系
2023	多點振鏡掃描式全域彩色共焦表面顯微量測系統之研發 Development of multipoint Galvo-scanned chromatic confocal microscope	周煜峰; Yu-Feng Chou	機械工程學系
2024	應用線掃描結構光重建表面傾斜與三維形貌之研究 Research on Accurate 3D Proﬁle Reconstruction with Surface Orientation Using Line-scan Structured Light	曹原輔; Yuan-Fu Tsao	機械工程學系
2021	振鏡掃描式全域彩色共焦表面形貌量測系統之研發 Research on galvanometer-scan full-field surface profilometry using chromatic confocal principle	陳泓叡; Hong-Ruei Chen	機械工程學系
2022	振鏡掃描式複數條紋投影三維形貌量測術之開發 Development of Galvo-scanning Multi-line Fringe Projection Profilometry	黃柏翰; Bo-Han Huang	機械工程學系
2021	運用光學量測於機械手臂末端效應器位置和姿態之高精度檢測 High-accuracy detection and monitoring on the position and orientation of the robotic arm end-effector using optical measurement	黃聖皓; Sheng-Hao Huang	機械工程學系

Showing results 1 to 11 of 11