請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78766
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 段維新(Wei-Hsing Tuan) | |
dc.contributor.author | Tsung-Te Chou | en |
dc.contributor.author | 周宗德 | zh_TW |
dc.date.accessioned | 2021-07-11T15:17:50Z | - |
dc.date.available | 2021-07-23 | |
dc.date.copyright | 2019-07-23 | |
dc.date.issued | 2019 | |
dc.date.submitted | 2019-07-17 | |
dc.identifier.citation | 1. A. Carim, R. Loehman, Microstructure at the interface between AIN and a Ag–Cu–Ti braze alloy a. Journal of Materials Research, 1990. 5(7): p. 1520-1529.
2. M. Singh, T.P. Shpargel, G.N. Morscher, R. Asthana, Active metal brazing and characterization of brazed joints in titanium to carbon–carbon composites. Materials Science and Engineering: A, 2005. 412(1): p. 123-128. 3. K.M. Jasim, F.A. Hashim, R.H. Yousif, R.D. Rawlings, A.R. Boccaccini, Actively brazed alumina to alumina joints using CuTi, CuZr and eutectic AgCuTi filler alloys. Ceramics International, 2010. 36(8): p. 2287-2295. 4. H. Wang, S.-b. Xue, Effect of Ag on the properties of solders and brazing filler metals. Journal of Materials Science: Materials in Electronics, 2016. 27(1): p. 1-13. 5. J.H. Harris, Sintered aluminum nitride ceramics for high-power electronic applications. JOM, 1998. 50(6): p. 56-60. 6. R. Morrell, Handbook of properties of technical and engineering ceramics. 1987: Hmso. 7. W. Werdecker, F. Aldinger, Aluminum nitride-an alternative ceramic substrate for high power applications in microcircuits. IEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1984. 7(4): p. 399-404. 8. K. Suganuma, Y. Miyamoto, M. Koizumi, Joining of ceramics and metals. Annual Review of Materials Science, 1988. 18(1): p. 47-73. 9. X. Dai, J. Cao, Z. Chen, X. Song, J. Feng , Brazing SiC ceramic using novel B4C reinforced Ag–Cu–Ti composite filler. Ceramics International, 2016. 42(5): p. 6319-6328. 10. J.A. Fernie, R. Drew, K. Knowles, Joining of engineering ceramics. International Materials Reviews, 2009. 54(5): p. 283-331. 11. M.M. Schwartz, Brazing. 2003: ASM international. ISBN: 978-0-87170-784-0 12. O. Akselsen, Advances in brazing of ceramics. Journal of Materials Science, 1992. 27(8): p. 1989-2000. 13. P. De Gennes, The dynamics of reactive wetting on solid surfaces. Physica A: Statistical Mechanics and its Applications, 1998. 249(1-4): p. 196-205. 14. O. Dezellus, N. Eustathopoulos, Fundamental issues of reactive wetting by liquid metals. Journal of Materials Science, 2010. 45(16): p. 4256-4264. 15. S. Kalogeropoulou, C. Rado, N. Eustathopoulos, Mechanisms of reactive wetting: the wetting to non-wetting case. Scripta Materialia, 1999. 7(41): p. 723-728. 16. Y. Ren, R. Zhou, D. Zhu, T. Zhang , The reactive wetting kinetics of interfacial tension: a reaction-limited model. RSC Advances, 2017. 7(21): p. 13003-13009. 17. S. Gambaro, M.L. Muolo, F. Valenza, G. Cacciamani, L. Esposito, A. Passerone , Wettability of transparent YAG (Y 3 Al 5 O 12) by molten Ag–Cu–Ti alloys. Journal of the European Ceramic Society, 2015. 35(10): p. 2895-2906. 18. M. Finnis, The theory of metal-ceramic interfaces. Journal of Physics: Condensed Matter, 1996. 8(32): p. 5811. 19. M. Schwartz, Brazing: For the engineering Technologist, chapman & Hau. Londol1. pp. I-51, 1995. 20. K.C. Russell, S. Oh, A. Figueredo, Theoretical and experimental studies of ceramic: metal wetting. MRS Bulletin, 1991. 16(4): p. 46-52. 21. M. Lane, Interface fracture. Annual Review of Materials Research, 2003. 33(1): p. 29-54. 22. A.A. Volinsky, N.R. Moody, W.W. Gerberich, Interfacial toughness measurements for thin films on substrates. Acta Materialia, 2002. 50(3): p. 441-466. 23. M. Singh, R. Asthana, T.P. Shpargel, Brazing of carbon–carbon composites to Cu-clad molybdenum for thermal management applications. Materials Science and Engineering: A, 2007. 452–453: p. 699-704. 24. J. Murray, The Cu− Ti (Copper-Titanium) system. Bulletin of alloy phase diagrams, 1983. 4(1): p. 81-95. 25. O. Kozlova, M. Braccini, R. Voytovych, N. Eustathopoulos, P. Martinetti, M.-F. Devismes, Brazing copper to alumina using reactive CuAgTi alloys. Acta Materialia, 2010. 58(4): p. 1252-1260. 26. J.K. Boadi, T. Yang, T. Iseki, Brazing of pressureless-sintered SiC using Ag-Cu-Ti alloy. Journal of materials science, 1987. 22(7): p. 2431-2434. 27. S. Hirnyj, J.E. Indacochea, Phase transformations in Ag70. 5Cu26. 5Ti3 filler alloy during brazing processes. Chemistry of metals and alloys, 2008(1,№ 3-4): p. 323-332. 28. J.L. Murray, Calculations of stable and metastable equilibrium diagrams of the Ag-Cu and Cd-Zn systems. Metallurgical Transactions A, 1984. 15(2): p. 261-268. 29. A.H. Carim, C.H. Mohr, Brazing of alumina with Ti4CU2O and Ti3CU3O interlayers. Materials Letters, 1997. 33(3–4): p. 195-199. 30. S. Mandal, A.K. Ray, A.K. Ray, Correlation between the mechanical properties and the microstructural behaviour of Al2O3–(Ag–Cu–Ti) brazed joints. Materials Science and Engineering: A, 2004. 383(2): p. 235-244. 31. C. Valette, M.-F. Devismes, R. Voytovych, N. Eustathopoulos Interfacial reactions in alumina/CuAgTi braze/CuNi system. Scripta Materialia, 2005. 52(1): p. 1-6. 32. J. Andrieux, O. Dezellus, F. Bosselet, J.C. Viala, Low-Temperature Interface Reaction Between Titanium and the Eutectic Silver-Copper Brazing Alloy. Journal of phase equilibria and diffusion, 2009. 30(1): p. 40-45. 33. M. Ali, K.M. Knowles, P.M. Mallinson, J.A. Fernie, Microstructural evolution and characterisation of interfacial phases in Al 2 O 3/Ag–Cu–Ti/Al 2 O 3 braze joints. Acta Materialia, 2015. 96: p. 143-158. 34. D. Janičkovič, P. Sebo, P. Duhaj, P. Svec , The rapidly quenched Ag-Cu-Ti ribbons for active joining of ceramics. Materials Science and Engineering: A, 2001. 304: p. 569-573. 35. R. Voytovych, F. Robaut, N. Eustathopoulos, The relation between wetting and interfacial chemistry in the CuAgTi/alumina system. Acta Materialia, 2006. 54(8): p. 2205-2214. 36. A. Kar, S. Mandal, R.N. Ghosh, T.K. Ghosh, A.K. Ray , Role of Ti diffusion on the formation of phases in the Al2O3–Al2O3 brazed interface. Journal of materials science, 2007. 42(14): p. 5556-5561. 37. W. Byun, H. Kim, M. Yun, Variations of phases and microstructure of reaction products in the interface of Al2O3Ag-Cu-Ti joint system with heat-treatment. Scripta metallurgica et materialia, 1994. 31(11): p. 1543-1547. 38. J. Terrill, C. Cochran, J. Stokes , UNDERSTANDING THE MECHANISMS OF ALUMINUM BRAZING. 1971, Alcoa Technical Center, Pittsburgh. 39. R. Standing, M. Nicholas, The wetting of alumina and vitreous carbon by copper-tin-titanium alloys. Journal of Materials Science, 1978. 13(7): p. 1509-1514. 40. M. Ali, K.M. Knowles, P.M. Mallinson, J.A. Fernie , Interfacial reactions between sapphire and Ag–Cu–Ti-based active braze alloys. Acta Materialia, 2016. 103: p. 859-869. 41. M.L. Santella, J.A. Horton, J.J. Pak, Microstructure of Alumina Brazed with a Silver‐Copper‐Titanium Alloy. Journal of the American Ceramic Society, 1990. 73(6): p. 1785-1787. 42. C. -C Lin, R.-B. Chen, R.-K. Shiue, A wettability study of Cu/Sn/Ti active braze alloys on alumina. Journal of materials science, 2001. 36(9): p. 2145-2150. 43. S.-H.Wei, C.-C. Lin, Microstructural evolution and bonding mechanisms of the brazed Ti/ZrO 2 joint using an Ag 68.8 Cu 26.7 Ti 4.5 interlayer at 900° C. Journal of Materials Research, 2014. 29(5): p. 684-694. 44. N. Eustathopoulos, M.G. Nicholas, B. Drevet, Wettability at high temperatures. Vol. 3. 1999: Elsevier. 45. J. Murray, K. Bhansali, The Ag− Ti (Silver-Titanium) system. Bulletin of Alloy Phase Diagrams, 1983. 4(2): p. 178-183. 46. G.P. Kelkar, A.H. Carim, Al solubility in M6X compounds in the Ti-Cu-O system. Materials Letters, 1995. 23(4-6): p. 231-235. 47. S. Suenaga, M. Nakahashi, M. Maruyama, T. Fukasawa, Interfacial Reactions between Sapphire and Silver—Copper—Titanium Thin Film Filler Metal. Journal of the American Ceramic Society, 1997. 80(2): p. 439-444. 48. M. Bartosik, D. Holec, D. Apel, M. Klaus, C. Genzel, J. Keckes, M. Arndt, P. Polcik, C.M. Koller, P.H. Mayrhofer , Thermal expansion of Ti-Al-N and Cr-Al-N coatings. Scripta Materialia, 2017. 127: p. 182-185. 49. I. Seki, S.-i. Yamaura, Reduction of Titanium Dioxide to Metallic Titanium by Nitridization and Thermal Decomposition. Materials transactions, 2017. 58(3): p. 361-366. 50. K. Erskine, A. Meier, S. Pilgrim, Brazing perovskite ceramics with silver/copper oxide braze alloys. Journal of materials science, 2002. 37(8): p. 1705-1709. 51. A. Tomsia, Ceramic/metal joining for structures and materials. Le Journal de Physique IV, 1993. 3(C7): p. C7-1317-C7-1326. 52. H. Zhao, R. Woods, Controlled atmosphere brazing of aluminum, in Advances in Brazing. 2013, Elsevier. p. 280-323e. 53. A. Bellosi, T. Kosmac, A.P. Tomsia, Interfacial science in ceramic joining. Vol. 58. 2013: Springer Science & Business Media. 54. S.D. Peteves, Joining nitride ceramics. Ceramics International, 1996. 22(6): p. 527-533. 55. J. Pimenta, A. Buschinelli, R. Nascimento, A. Martinelli, J. Remmel , Joining of zirconia mechanically metallized with titanium. Cerâmica, 2010. 56(339): p. 212-221. 56. Y. Zhang, D. Feng, Z. He, X. Chen , Progress in joining ceramics to metals. Journal of iron and steel research, international, 2006. 13(2): p. 1-5. 57. S. Rhee, Wetting of AlN and TiC by liquid Ag and liquid Cu. Journal of the American Ceramic Society, 1970. 53(12): p. 639-641. 58. S. Sugihara, Y. Hirose, Wetting properties of AlN with electrode metals and their interfaces. Journal of the Ceramic Society of Japan, 1994. 102(1183): p. 217-220. 59. T. Tamai, M. Naka, Ti effect on microstructure and strength Of Si 3 N 4/Si 3 N 4 and SiC/SiC joints brazed with Cu-Ag-Ti filler metals. Journal of materials science letters, 1996. 15(14): p. 1203-1204. 60. N.Y. Taranets, H. Jones, Wettability of aluminium nitride based ceramics of different porosity by two active silver based brazing alloys. Materials Science and Engineering: A, 2004. 379(1-2): p. 251-257. 61. Y. Imanaka, M.R. Notis, Interfacial reaction between titanium thin films and aluminum nitride substrates. Journal of the American Ceramic Society, 1999. 82(6): p. 1547-1552. 62. R. Schmid-Fetzer, Aluminium–copper–titanium. Landolt–Bornstein new series, 2005. 4: p. 156-173. 63. M. Singh, T.P. Shpargel, G. Morscher, R. Asthana, Active metal brazing of carbon-carbon composites to titanium. 2004. 64. R. Asthana, M. Singh, N. Sobczak, Wetting behavior and interfacial microstructure of palladium-and silver-based braze alloys with C–C and SiC–SiC composites. Journal of Materials Science, 2010. 45(16): p. 4276-4290. 65. G. Kumar, K.N. Prabhu, Review of non-reactive and reactive wetting of liquids on surfaces. Advances in Colloid and Interface Science, 2007. 133(2): p. 61-89. 66. J.G. Li, Kinetics of wetting and spreading of Cu-Ti alloys on alumina and glassy carbon substrates. Journal of materials science letters, 1992. 11(23): p. 1551-1554. 67. N. Sobczak, J. Sobczak, P. Rohatgi, M. Ksiazek, W. Radziwill, J. Morgiel, Interaction between Ti or Cr containing copper alloys and porous graphite substrate. in Proceedings of 2nd International Conference on High Temperature Capillarity, Cracow, Poland. 1997. 68. L. Li, P. Reynaud, G. Fantozzi, Effects of interface bonding properties on cyclic tensile behavior of unidirectional C/Si3N4 and SiC/Si3N4 composites. International Journal of Applied Ceramic Technology. 69. A.E. Jarfors, The influence of carbon on the phases in the copper-titanium system and their precipitation. Journal of materials science, 1999. 34(18): p. 4533-4544. 70. D. Mortimer, M. Nicholas, The wetting of carbon and carbides by copper alloys. Journal of Materials Science, 1973. 8(5): p. 640-648. 71. A.G. Evans, J.W. Hutchinson, Y. Wei, Interface adhesion: effects of plasticity and segregation. Acta Materialia, 1999. 47(15–16): p. 4093-4113. 72. C.-W. Nan, G. Liu, Y. Lin, M. Li, Interface effect on thermal conductivity of carbon nanotube composites. Applied Physics Letters, 2004. 85(16): p. 3549-3551. 73. H.C. Cao, M.D. Thouless, A.G. Evans, Residual stresses and cracking in brittle solids bonded with a thin ductile layer. Acta Metallurgica, 1988. 36(8): p. 2037-2046. 74. C. Hsueh, A. Evans, Residual stresses in meta/ceramic bonded strips. Journal of the American Ceramic Society, 1985. 68(5): p. 241-248. 75. B.J. Dalgleish, M. Lu, and A.G. Evans, The strength of ceramics bonded with metals. Acta Metallurgica, 1988. 36(8): p. 2029-2035. 76. A.G. Evans, M. Ruhle, B.J. Dalgleish, P.G. Charalambides, Structural Materials: Properties, Microstructure and Processing The fracture energy of bimaterial interfaces. Materials Science and Engineering: A, 1990. 126(1): p. 53-64. 77. P. Charalambides, J. Lund, A.G. Evans, R.M. Mcmeeking, A test specimen for determining the fracture resistance of bimaterial interfaces. Journal of applied mechanics, 1989. 56(1): p. 77-82. 78. R.H. Dauskardt, M. Lane, Q. Ma, N. Krishna, Adhesion and debonding of multi-layer thin film structures. Engineering Fracture Mechanics, 1998. 61(1): p. 141-162. 79. S.J. Howard, A.J. Phillipps, T.W. Clyn, Fatigue and Fracture of Inorganic CompositesThe interpretation of data from the four-point bend delamination test to measure interfacial fracture toughness. Composites, 1993. 24(2): p. 103-112. 80. N. Klingbeil, J. Beuth, Interfacial fracture testing of deposited metal layers under four-point bending. Engineering fracture mechanics, 1997. 56(1): p. 113-126. 81. A.G. Evans, B.J. Dalgleish, Proceedings of the International Symposium on Metal-Ceramic InterfacesThe fracture resistance of metal-ceramic interfaces. Acta Metallurgica et Materialia, 1992. 40: p. S295-S306. 82. B. Wang, T. Siegmund, A modified 4-point bend delamination test. Microelectronic Engineering, 2008. 85(2): p. 477-485. 83. C.H. Hsueh, W.H. Tuan, W.C.J. Wei, Analyses of steady-state interface fracture of elastic multilayered beams under four-point bending. Scripta Materialia, 2009. 60(8): p. 721-724. 84. H. Hongqi, J. Zhihao, W. Xiaotian, The influence of brazing conditions on joint strength in Al2O3/Al2O3 bonding. Journal of materials science, 1994. 29(19): p. 5041-5046. 85. K. Ahmad, P. Wei, C. Wan, Thermal conductivities of alumina-based multiwall carbon nanotube ceramic composites. Journal of Materials Science, 2014. 49(17): p. 6048-6055. 86. M. Inagaki, Y. Kaburagi, Y. Hishiyama, Thermal management material: graphite. Advanced Engineering Materials, 2014. 16(5): p. 494-506. 87. R. Taylor, W. Kimbrough, Thermophysical properties of ATJS graphite at high temperatures. Carbon, 1970. 8(5): p. 665-671. 88. J. Holman, Heat Transfer of International Edition. 2009, McGraw-Hill, New York. 89. D. Hasselman, L.F. Johnson, Effective thermal conductivity of composites with interfacial thermal barrier resistance. Journal of Composite Materials, 1987. 21(6): p. 508-515. 90. S.F. Corbin, D.M. Turriff, Thermal diffusivity by the laser flash technique. Characterization of Materials, 2002: p. 1-10. 91. A. Standard, E1461, 2007,“Standard Test Method for Thermal Diffusivity by the Flash Method,” ASTM International, West Conshohocken, PA. 92. D. Zhao, X. Qian, X. Gu, S.A. Jajja, R. Yang, Measurement techniques for thermal conductivity and interfacial thermal conductance of bulk and thin film materials. Journal of Electronic Packaging, 2016. 138(4): p. 040802. 93. K.S. Novoselov, Graphene: materials in the Flatland. in Microwave Conference (EuMC), 2011 41st European. 2011. IEEE. 94. A.K. Geim, Nobel Lecture: Random walk to graphene. Reviews of Modern Physics, 2011. 83(3): p. 851. 95. J. Chastain, R.C. King, J. Moulder, Handbook of X-ray photoelectron spectroscopy: a reference book of standard spectra for identification and interpretation of XPS data. 1995: Physical Electronics Eden Prairie, MN. 96. R.D. Cowan, Pulse method of measuring thermal diffusivity at high temperatures. Journal of Applied Physics, 1963. 34(4): p. 926-927. 97. J. Selsing, Internal stresses in ceramics. Journal of the American Ceramic Society, 1961. 44(8): p. 419-419. 98. M. Marlowe, Elastic properties of three grades of fine grained graphite at 2000 C. 1970. 99. O. Dezellus, R. Arroyave, S.G. Fries, Thermodynamic modelling of the Ag–Cu–Ti ternary system. International Journal Of Materials Research, 2011. 102(3): p. 286-297. 100. A. Taylor, N. Doyle, The thermal expansion of titanium, vanadium and niobium monoxides. Journal of Applied Crystallography, 1971. 4(2): p. 103-109. 101. K. Suganuma, T. Okamoto, M. Koizumi, Method for preventing thermal expansion mismatch effect in ceramic-metal joining. Journal of materials science letters, 1985. 4(5): p. 648-650. 102. Y. Liang, H. Wang, Y. Yang, Y. Wang, Q. Jiang , Evolution process of the synthesis of TiC in the Cu–Ti–C system. Journal of alloys and Compounds, 2008. 452(2): p. 298-303. 103. R.E. Loehman, A.P. Tomsia, J.A. Pask, S.M. Johnson, Bonding mechanisms in silicon nitride brazing. Journal of the American Ceramic Society, 1990. 73(3): p. 552-558. 104. Y. Tian, C. Hang, C. Wang, Y. Zhou, Evolution of Cu/Al intermetallic compounds in the copper bump bonds during aging process. in 2007 8th International Conference on Electronic Packaging Technology. 2007. IEEE. 105. H. Wriedt, J. Murray, The N-Ti (nitrogen-titanium) system. Bulletin of Alloy Phase Diagrams, 1987. 8(4): p. 378-388. 106. J. Murray, H. Wriedt, The O− Ti (oxygen-titanium) system. Journal of Phase Equilibria, 1987. 8(2): p. 148-165. 107. A. San-Martin, F. Manchester, The H− Ti (hydrogen-titanium) system. Bulletin of alloy phase diagrams, 1987. 8(1): p. 30-42. 108. K. Aigner, W. Langauer, D. Rafaja, P. Ettmayer, Lattice parameters and thermal expansion of Ti (CxN1− x), Zr (CxN1− x), Hf (CxN1− x) and TiN1− x from 298 to 1473 K as investigated by high-temperature X-ray diffraction. Journal of alloys and compounds, 1994. 215(1-2): p. 121-126. 109. D. Hummer, P. Heaney, J. Post, Thermal expansion of anatase and rutile between 300 and 575 K using synchrotron powder X-ray diffraction. Powder diffraction, 2007. 22(4): p. 352-357. 110. R.K. Kirby, Thermal expansion of rutile from 100 to 700 K. 1964, University of Maryland. 111. G.K. Dalapati, A.K. Kushwaha, M. Sharma, V. Suresh, S. Shannigrahi, S. Zhuk, S. Masudy-Panah, Transparent heat regulating (THR) materials and coatings for energy saving window applications: Impact of materials design, micro-structural, and interface quality on the THR performance. Progress in Materials Science, 2018. 112. S.J. Smith, R. Stevens, S. Liu, G. Li, A. Navrotski, J. Boerio-Goates, B.F. Woodfield, Heat capacities and thermodynamic functions of TiO2 anatase and rutile: Analysis of phase stability. American Mineralogist, 2009. 94(2-3): p. 236-243. 113. E. McCafferty, Thermodynamics of corrosion: pourbaix diagrams, in Introduction to Corrosion Science. 2010, Springer, New York, NY. p. 95-117. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78766 | - |
dc.description.abstract | 對於陶瓷材料而言,與異質材料的接合是個具有挑戰性且具備開發潛力的研究領域。本研究選用氮化鋁作為基板,以活性金屬銲片與石墨紙進行接合研究並比較溫度、氣氛等接合參數對介面的影響,並鑑定了介面處產生之反應物。相對於過往多在真空下進行接合,對於陶瓷-金屬-石墨系統在氣氛下之活性金屬硬銲有更深入的研究且觀察了機械性質與傳導性質的改變。
氮化鋁本身具有高熱傳導值的特性,同時其反應性相當低而不易受到腐蝕影響。而石墨紙雖然受限其結構而在縱向之機械性質以及熱傳導性質較差,但在平面方向有相當優異的性質。因此藉由使用活性金屬銲片克服兩者表面活性差的缺點將之接合,以氮化鋁基板提供整體強度,而石墨紙在表面可作為熱的導體形成散熱的複合系統。 本研究成功以金屬銲片Ticusil在流動氣氛環境下成功接合氮化鋁以及石墨紙,結果顯示銲片中的鈦會在升溫後移動到界面處,與氮化鋁形成氮化鈦層以及具有接近立方堆積結構之鈦銅鋁的氮化物,其成分及結構與 (Ti, Cu, Al)6N之結構近似,以及與石墨紙形成以TiC為主之鈦的碳化物。而改變接合溫度、持溫時間以及接合氣氛等參數對於介面反應物的影響也在本研究中進行研究與討論,另外對於在氮氣、氬氣等氣氛中接合時產生反應物的機制的推測則是在高溫時氣氛中的氮、氧溶入產生的富鈦共晶液體,在降溫過程時在剩餘的共晶液體中達到飽和而析出成顆粒狀的散布區域。 同時對於成功接合的試片也進行了機械性質、熱與電傳導性質的測量與探討。其中機械性質以四點彎曲試驗觀察破壞行為,結果顯示此接合系統改善了原本單層陶瓷的脆性破壞行為,使其破壞趨緩,同時此系統也具有方向性,以氮化鋁基板承受壓應力之機械性質表現較佳。此外,此接合系統之界面也相當穩固,整體系統的破壞取決於受力超過基材的強度而使基材先行破裂,而後才是界面的分離,因此界面的強度較基材來的穩定。而傳導性質的量測結果則顯示在接合後,複合基板其熱傳導性相對於氮化鋁基材有些許提升。 | zh_TW |
dc.description.abstract | Heterogeneous joining is a challenging and promising issue for ceramic materials. In the present study, aluminum nitride was chosen as ceramic substrate to join with graphite paper by active brazing alloys. The influence of joining parameters such as temperature, atmosphere was also studied. Instead of most studies focus on joining in vacuum, the joining of ceramic-filler-graphite system was conducted in flowing atmosphere. The corresponding properties were analyzed.
Aluminum nitride is a ceramic material with high strength, high thermal conductivity, its low reactivity makes it stable against chemical corrosion. Meanwhile, graphite paper exhibits poor mechanical properties and thermal conductivity along the vertical direction, but excellent properties in planar direction due to its structure. At the same time, active brazing alloy was chosen to join both substrates to conquer the poor reactivity of both substrates. The aluminum nitride substrate can be used to enhance the integrity. After bonding, the graphite paper should exhibit great thermal conductivity. The result showed that the aluminum nitride and graphite paper can be successfully joined with Ticusil while in a flowing atmosphere. The titanium within Ticusil moves to interface to form reaction phases during the brazing process. The reaction phase at the AlN-Ticusil interface is mainly composed of titanium-copper-aluminum nitrides. The nitride exhibits nearly cubic structure, similar to (Ti, Cu, Al)6N. For the graphite-Ticusil interface, the reaction phase is mainly composed of TiC. A simple mechanism of this filler joining in atmosphere was also proposed. The reactive elements in flowing atmosphere would dissolve into Ti-rich eutectic liquid at the elevated temperature. The particle-shape products would then precipitate during cooling process when the remained eutectic liquid saturated after forming TiN layer. The fracture behavior, thermal conductivity and electrical conductivity of the joined specimen was also observed. The bending result showed that the fracture behavior changed from catastrophic to graceful after joining. Besides, the four-point bending strength for the graphite-Ticusil-AlN is anisotropic, similar to graphite paper. The performance would be better if the aluminum nitride side is under a compressive stress. Meanwhile, the failure of the specimen started from the rupture of the substrates instead of the separation at the interface. Also, the conductivity was increased after joining. | en |
dc.description.provenance | Made available in DSpace on 2021-07-11T15:17:50Z (GMT). No. of bitstreams: 1 ntu-108-F03527026-1.pdf: 6109419 bytes, checksum: 0869ed8d9622f8f462924b1849aa41cb (MD5) Previous issue date: 2019 | en |
dc.description.tableofcontents | 摘要 ii
ABSTRACT iii CONTENTS v Chapter 1 Introduction 1 Chapter 2 Literature survey 4 2.1 Characteristic of AlN ……………. 4 2.2 Joining metals to ceramics …….. 7 2.3 Brazing 9 2.4 Brazing of alumina with Ag-Cu-Ti braze foil 11 2.5 Brazing of AlN with Ag-Cu-Ti braze foil 15 2.6 The reaction phases in Ti-Cu system containing carbon 20 2.7 Observation of Interface 23 2.8 Mechanical properties characterization 26 2.9 The influence of brazing parameters on interface 30 2.10 Heat transfer 32 2.11 Measurement of thermal conductivity by laser flash method 34 Chapter 3 Experimental Procedures 37 3.1 Starting Materials 37 3.1.1 Aluminum nitride substrate 37 3.1.2 Graphite paper 37 3.1.3 Brazing materials 38 3.2 Joining process 38 3.3 Characterization of specimen 40 3.3.1 Morphology observation 40 3.3.2 Composition analysis 40 3.3.3 TEM analysis 40 3.3.4 Four-point bending test 41 3.3.5 Thermal properties measurement 42 3.3.6 Electrical properties measurement 43 Chapter 4 Results 44 4.1 Joining of ceramics to ceramics 44 4.1.1 Joining parameters 44 4.1.2 Microscopic observation 45 4.1.3 Composition analysis 48 4.2 Graphite-Ticusil-AlN 51 4.2.1 Parameters 51 4.2.2 Specimen observation 52 4.2.3 Composition analysis 57 4.3 Graphite-Ticusil-AlN prepared in vacuum 61 4.3.1 Parameters 61 4.3.2 Specimen observation 61 4.3.3 Composition analysis 66 4.4 The effect of brazing environment 71 4.5 Characterization of reaction products 76 4.6 Four-point bending test 81 4.7 Thermal conductivity 85 Chapter 5 Discussion 91 5.1 Brazing conditions 91 5.2 Interface observation 93 5.2.1 The influence of gravity 93 5.2.2 The joining mechanism of Ticusil 93 5.2.3 TiN layer at AlN-Ticusil interface 95 5.2.4 Ti-Cu layer at AlN-Ticusil interface 98 5.2.5 TiC layer at graphite-Ticusil interface 104 5.2.6 Layer between graphite paper at graphite-Ticusil interface 105 5.2.7 The effect of joining parameters 106 5.3 Fracture behavior 110 5.4 Thermal and electrical conductivity 114 5.4.1 The influence on joining system 114 5.4.2 The influence of joining atmosphere 115 5.4.3 The influence of holding time and post heat cycles 115 5.4.4 The thermal conductivity of graphite paper 116 5.4.5 Electrical conductivity 117 Chapter 6 Conclusions 119 REFERENCE 121 | |
dc.language.iso | en | |
dc.title | 以金屬銲料接合石墨紙與氮化鋁之研究 | zh_TW |
dc.title | Brazing of graphite paper and aluminum nitride with metallic braze filler | en |
dc.type | Thesis | |
dc.date.schoolyear | 107-2 | |
dc.description.degree | 博士 | |
dc.contributor.oralexamcommittee | 林昆霖(Kun-Lin Lin),許沛衣(Pei-Yi Hsu),薛人愷(Ren-Kae Shiue),施劭儒(Shao-Ju Shih),薛承輝(Chun-Hway Hsueh) | |
dc.subject.keyword | 接合,氮化鋁,石墨紙,界面,硬銲, | zh_TW |
dc.subject.keyword | joining,aluminum nitride,graphite paper,interface,brazing, | en |
dc.relation.page | 126 | |
dc.identifier.doi | 10.6342/NTU201901526 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2019-07-18 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-108-F03527026-1.pdf 目前未授權公開取用 | 5.97 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。