請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78204
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林新智(Hsin-Chin Lin) | |
dc.contributor.author | Yen-Lun Chang | en |
dc.contributor.author | 張晏綸 | zh_TW |
dc.date.accessioned | 2021-07-11T14:45:51Z | - |
dc.date.available | 2021-10-14 | |
dc.date.copyright | 2016-10-14 | |
dc.date.issued | 2016 | |
dc.date.submitted | 2016-07-20 | |
dc.identifier.citation | 1. Chang, L. and T. Read, PLASTIC DEFORMATION AND DIFFUSIONLESS PHASE CHANGES IN METALS THE BOLD-CADMIUM BETA PHASE. 1950, Columbia University.
2. Otsuka, K. and K. Shimizu, Pseudoelasticity and shape memory effects in alloys. International Metals Reviews, 1986. 31(1): p. 93-114. 3. Wayman, C., Some applications of shape-memory alloys. JOM, 1980. 32(6): p. 129-137. 4. Sato, A., et al., Shape memory effect in γ⇄ ϵ transformation in Fe-30Mn-1Si alloy single crystals. Acta Metallurgica, 1982. 30(6): p. 1177-1183. 5. Pilate, F., et al., Shape-memory polymers for multiple applications in the materials world. European Polymer Journal. 6. Lendlein, A., et al., Chapter 09244 - Shape-Memory Polymers, in Reference Module in Materials Science and Materials Engineering. 2016, Elsevier. 7. Ramdas, M.R., K.S.S. Kumar, and C.P.R. Nair, Click polymerizations: Encouraging route for shape memory polymers. Materials Letters, 2016. 172: p. 216-221. 8. Du, Z., et al., Size effects and shape memory properties in ZrO2 ceramic micro- and nano-pillars. Scripta Materialia, 2015. 101: p. 40-43. 9. Lobo, P.S., J. Almeida, and L. Guerreiro, Shape Memory Alloys Behaviour: A Review. Procedia Engineering, 2015. 114: p. 776-783. 10. Tadaki, T., K. Otsuka, and K. Shimizu, Shape memory alloys. Annual Review of Materials Science, 1988. 18(1): p. 25-45. 11. Ortin, J. and A. Planes, Thermodynamic analysis of thermal measurements in thermoelastic martensitic transformations. Acta metallurgica, 1988. 36(8): p. 1873-1889. 12. Tong, H.C. and C.M. Wayman, Characteristic temperatures and other properties of thermoelastic martensites. Acta Metallurgica, 1974. 22(7): p. 887-896. 13. Salzbrenner, R.J. and M. Cohen, On the thermodynamics of thermoelastic martensitic transformations. Acta Metallurgica, 1979. 27(5): p. 739-748. 14. Miyazaki, S., et al., Characteristics of deformation and transformation pseudoelasticity in Ti-Ni alloys. Le Journal de Physique Colloques, 1982. 43(C4): p. C4-255-C4-260. 15. Aaronson, H., et al., Solid to Solid Phase Transformations. Pittsburgh, Pa, 10-14 Aug. 1981, 1981: p. 1982. 16. Olson, G. and M. Cohen, Thermoelastic behavior in martensitic transformations. Scripta Metallurgica, 1975. 9(11): p. 1247-1254. 17. Saburi, T., S. Nenno, and C. Wayman, Shape memory mechanisms in alloys. ICOMAT 1979. Martensitic Transformations, 1979: p. 619-632. 18. Nishida, M. and T. Honma, All-round shape memory effect in Ni-rich TiNi alloys generated by constrained aging. Scripta Metallurgica, 1984. 18(11): p. 1293-1298. 19. Miyazaki, S., K. Otsuka, and Y. Suzuki, Transformation pseudoelasticity and deformation behavior in a Ti-50.6at%Ni alloy. Scripta Metallurgica, 1981. 15(3): p. 287-292. 20. Hodgson, D.E., W. Ming, and R.J. Biermann, Shape memory alloys. ASM International, Metals Handbook, Tenth Edition., 1990. 2: p. 897-902. 21. 林世庭, Ti50Ni50及Ti49.3Ni50.7鈦鎳形狀記憶合金變態及機械性能之研究, in 材料科學與工程學研究所. 2010, 國立臺灣大學: 台北市. p. 115. 22. Naito, H., et al., Analytical study on training effect of pseudoelastic transformation of shape memory alloys in cyclic loading. Journal of intelligent material systems and structures, 2001. 12(4): p. 295-300. 23. Jackson, B., et al., Production of NiTi via the FFC Cambridge process. Journal of The Electrochemical Society, 2008. 155(12): p. E171-E177. 24. Jackson, C., H. Wagner, and R. Wasilewski, NASA-SP 5110. Technology Utilization Office, 1972. 25. Otsuka, K., T. Sawamura, and K. Shimizu, Crystal structure and internal defects of equiatomic TiNi martensite. Physica status solidi (a), 1971. 5(2): p. 457-470. 26. Šittner, P., et al., R-phase transformation phenomena in thermomechanically loaded NiTi polycrystals. Mechanics of Materials, 2006. 38(5–6): p. 475-492. 27. Saburi, T., New development of TiNi shape memory alloys, in Ecomaterials. 1994, Elsevier. p. 997-1002. 28. Ling, H.C. and K. Roy, Stress-induced shape changes and shape memory in the R and martensite transformations in equiatomic NiTi. Metallurgical Transactions A, 1981. 12(12): p. 2101-2111. 29. Duerig, T. and K. Bhattacharya, The influence of the R-phase on the superelastic behavior of NiTi. Shape Memory and Superelasticity, 2015. 1(2): p. 153-161. 30. Fernandes, D.J., et al., Understanding the shape-memory alloys used in orthodontics. ISRN dentistry, 2011. 2011. 31. Shaw, J.A. and S. Kyriakides, Thermomechanical aspects of NiTi. Journal of the Mechanics and Physics of Solids, 1995. 43(8): p. 1243-1281. 32. Furukawa-Techno-Material. Shape Memory Alloys & Super-elastic Alloys. 2000; Available from: https://www.furukawa-ftm.com/english/nt-e/product.htm. 33. Otsuka, K. and X. Ren, Recent developments in the research of shape memory alloys. Intermetallics, 1999. 7(5): p. 511-528. 34. Starosvetsky, D. and I. Gotman, Corrosion behavior of titanium nitride coated Ni–Ti shape memory surgical alloy. Biomaterials, 2001. 22(13): p. 1853-1859. 35. Kohn, J., et al., Biomaterials science: an introduction to materials in medicine. Academic, San Diego, 1996: p. 64-73. 36. Bronzino, J.D., Biomedical engineering handbook. Vol. 2. 1999: CRC press. 37. Yachia, D. and M. Beyar, New treatment modality for penile urethral strictures using a self-expanding and self-retaining coil stent: UroCoil. Follow-up of 16 months after removal of the stent. European urology, 1992. 24(4): p. 500-504. 38. Gil, F., J. Manero, and J. Planell, Relevant aspects in the clinical applications of NiTi shape memory alloys. Journal of Materials Science: Materials in Medicine, 1996. 7(7): p. 403-406. 39. Xu, J.L., et al., Microstructure, mechanical properties and superelasticity of biomedical porous NiTi alloy prepared by microwave sintering. Materials Science and Engineering: C, 2015. 46: p. 387-393. 40. Xu, J.L., et al., Effect of pore sizes on the microstructure and properties of the biomedical porous NiTi alloys prepared by microwave sintering. Journal of Alloys and Compounds, 2015. 645: p. 137-142. 41. Zhang, L., et al., Superelastic behaviors of biomedical porous NiTi alloy with high porosity and large pore size prepared by spark plasma sintering. Journal of Alloys and Compounds, 2015. 644: p. 513-522. 42. Huan, Z., et al., Porous NiTi surfaces for biomedical applications. Applied Surface Science, 2012. 258(13): p. 5244-5249. 43. Rocher, P., et al., Biocorrosion and biocompatibility of NiTi alloys. Eur Cell Mater, 2005. 9: p. 23-24. 44. Chu, C.L., et al., Surface structure and biomedical properties of chemically polished and electropolished NiTi shape memory alloys. Materials Science and Engineering: C, 2008. 28(8): p. 1430-1434. 45. Batalu, D. and H. Guoqiu, Improvement of the corrosion resistance of equiatomic NiTi shape memory alloy for medical implants by the electropolishing method. UPB Scientific Bulletin B, 2009. 71: p. 832. 46. COVIDIEN. Protege™ GPS™. 2014; Available from: http://www.medicalexpo.com/prod/covidien/peripheral-stents-nitinol-self-expanding-74674-552139.html. 47. ELLA-CS. Esophageal stent. 2014; Available from: http://www.medicalexpo.com/prod/ella-cs/esophageal-stents-nitinol-78568-489966.html. 48. PLC, U.H. Niti-S Esophageal Stents. 2014; Available from: http://www.aquilantinterventional.com/products/products_detail.asp?subp=products_by_all.asp&idProduct=846. 49. Medical, C. Our history: Nitinol stone extractors. 2014; Available from: https://www.cookmedical.com/urology/our-history-nitinol-stone-extractors/. 50. Garrido Abad, P., et al., Dispositivos antimigración durante la litotricia endoscópica con láser de holmium: YAG. Archivos Españoles de Urología (Ed. impresa), 2008. 61(9): p. 1115-1125. 51. 醫源世界. 骨折修復術. 2006; Available from: http://big5.39kf.com/cooperate/tu/yx/ss/gktk/2006-07-19-219353.shtml. 52. Stepan, L.L., D.S. Levi, and G.P. Carman, A thin film nitinol heart valve. Journal of biomechanical engineering, 2005. 127(6): p. 915-918. 53. Materials, S.A. Nitinol Dental Braces (Nickel titanium). 2013; Available from: http://www.samaterials.com/nitinol/407-nitinol-dental-braces.html. 54. Handysides, R. Advances in clinical endodontic instruments. 2010; Available from: http://dentistry.llu.edu/about/news/advances-clinical-endodontic-instruments. 55. Jia, W., et al., Nickel release from orthodontic arch wires and cellular immune response to various nickel concentrations. Journal of biomedical materials research, 1999. 48(4): p. 488-495. 56. Savarino, L., et al., Effects of metal ions on white blood cells of patients with failed total joint arthroplasties. Journal of biomedical materials research, 1999. 47(4): p. 543-550. 57. Blanco-Dalmau, L., H. Carrasquillo-Alberty, and J. Silva-Parra, A study of nickel allergy. The Journal of prosthetic dentistry, 1984. 52(1): p. 116-119. 58. Pereira, M.C., M.L. Pereira, and J.P. Sousa, Histological effects of iron accumulation on mice liver and spleen after administration of a metallic solution. Biomaterials, 1999. 20(22): p. 2193-2198. 59. Castleman, L. and S. Motzkin, The biocompatibility of nitinol. CRC Press, Inc., Biocompatibility of Clinical Implant Materials, 1981. 1: p. 129-154. 60. Black, J., Biological performance of materials: fundamentals of biocompatibility. 2005: CRC Press. 61. Remes, A. and D. Williams, Immune response in biocompatibility. Biomaterials, 1992. 13(11): p. 731-743. 62. Freiberg, K.E., et al., Effect of thermomechanical pre-treatment on short- and long-term Ni release from biomedical NiTi. Acta Biomaterialia, 2014. 10(5): p. 2290-2295. 63. Haynes, D.R., T.N. Crotti, and M.R. Haywood, Corrosion of and changes in biological effects of cobalt chrome alloy and 316L stainless steel prosthetic particles with age. Journal of biomedical materials research, 2000. 49(2): p. 167-175. 64. Torgersen, S., G. Moe, and R. Jonsson, Immunocompetent cells adjacent to stainless steel and titanium miniplates and screws. European journal of oral sciences, 1995. 103(1): p. 46-54. 65. Vreeburg, K., et al., Induction of immunological tolerance by oral administration of nickel and chromium. Journal of dental research, 1984. 63(2): p. 124-128. 66. Peitsch, T., et al., The release of nickel from orthodontic NiTi wires is increased by dynamic mechanical loading but not constrained by surface nitridation. Journal of Biomedical Materials Research Part A, 2007. 82(3): p. 731-739. 67. Xu, J.L., et al., Formation of Al2O3 coatings on NiTi alloy by micro-arc oxidation method. Current Applied Physics, 2009. 9(3): p. 663-666. 68. Cisse, O., et al., Effect of surface treatment of NiTi alloy on its corrosion behavior in Hanks’ solution. Journal of biomedical materials research, 2002. 61(3): p. 339-345. 69. Michiardi, A., et al., New oxidation treatment of NiTi shape memory alloys to obtain Ni‐free surfaces and to improve biocompatibility. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2006. 77(2): p. 249-256. 70. Müller, B., et al., Cell growth on pore-graded biomimetic TiO2 bone scaffolds. Journal of biomaterials applications, 2014: p. 0885328214559859. 71. Ng, K.W., H.C. Man, and T.M. Yue, Corrosion and wear properties of laser surface modified NiTi with Mo and ZrO2. Applied Surface Science, 2008. 254(21): p. 6725-6730. 72. Sun, T. and M. Wang. Chemical stability of the titania layer formed synthetically on NiTi shape memory alloy as a barrier to prevent nickel ion release. in Information Technology and Applications in Biomedicine, 2008. ITAB 2008. International Conference on. 2008. IEEE. 73. Wang, X., et al., Structure and properties of Al2O3 coatings formed on NiTi alloy by cathodic plasma electrolytic deposition. Surface and Coatings Technology, 2016. 285: p. 128-133. 74. Ying, Y., et al., Surface Modification of NiTi Alloy via Cathodic Plasma Electrolytic Deposition and its Effect on Ni Ion Release and Osteoblast Behaviors. Plasma Science and Technology, 2013. 15(7): p. 648. 75. Bernard, S.A., et al., Bone cell–materials interactions and Ni ion release of anodized equiatomic NiTi alloy. Acta Biomaterialia, 2011. 7(4): p. 1902-1912. 76. Wunderlich, W., The Atomistic Structure of Metal/Ceramic Interfaces Is the Key Issue for Developing Better Properties. Metals, 2014. 4(3): p. 410-427. 77. BeneQ. Equipment for Roll to Roll Atomic Layer Deposition. 2010; Available from: http://nextbigfuture.com/2010/04/equipment-for-roll-to-roll-atomic-layer.html. 78. Clark, R.D., Emerging Applications for High K Materials in VLSI Technology. Materials, 2014. 7(4): p. 2913-2944. 79. ALD Japan, I. 成膜装置ソ代表例. 2015; Available from: http://aldjapan.com/. 80. Elam, J., et al., Conformal coating on ultrahigh-aspect-ratio nanopores of anodic alumina by atomic layer deposition. Chemistry of Materials, 2003. 15(18): p. 3507-3517. 81. Knaut, M., et al., Atomic layer deposition for high aspect ratio through silicon vias. Microelectronic Engineering, 2013. 107: p. 80-83. 82. Cornagliotti, E., et al., Large area p-type PERL cells featuring local p+ BSF formed by laser processing of ALD Al2O3 layers. Solar Energy Materials and Solar Cells, 2015. 138: p. 72-79. 83. Werner, F., A. Cosceev, and J. Schmidt, Silicon Surface Passivation by Al2O3: Recombination Parameters and Inversion Layer Solar Cells. Energy Procedia, 2012. 27: p. 319-324. 84. Härkönen, J., et al., Atomic Layer Deposition (ALD) grown thin films for ultra-fine pitch pixel detectors. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 85. Pan, F.-M. 原子層化學氣相沉積(Atomic Layer Chemical Vapor Deposition, ALCVD). Available from: http://web.it.nctu.edu.tw/~FMPANLAB/ALD.htm. 86. Hatanpää, T., M. Ritala, and M. Leskelä, Precursors as enablers of ALD technology: Contributions from University of Helsinki. Coordination Chemistry Reviews, 2013. 257(23–24): p. 3297-3322. 87. Emslie, D.J.H., P. Chadha, and J.S. Price, Metal ALD and pulsed CVD: Fundamental reactions and links with solution chemistry. Coordination Chemistry Reviews, 2013. 257(23–24): p. 3282-3296. 88. Zhang, L. and M. Knez, Chapter 16 - Atomic Layer Deposition for Biomimicry, in Engineered Biomimicry. 2013, Elsevier: Boston. p. 399-428. 89. Barbos, C., et al., Characterization of Al2O3 Thin Films Prepared by Thermal ALD. Energy Procedia, 2015. 77: p. 558-564. 90. Dingemans, G. and W. Kessels, Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells. Journal of Vacuum Science & Technology A, 2012. 30(4): p. 040802. 91. Agostinelli, G., et al., Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge. Solar Energy Materials and Solar Cells, 2006. 90(18–19): p. 3438-3443. 92. Hoex, B., et al., Ultralow surface recombination of c-Si substrates passivated by plasma-assisted atomic layer deposited Al2O3. Applied Physics Letters, 2006. 89(4): p. 042112. 93. plasma-ald.com. Plasma Enhanced Atomic Layer Deposition. 2015; Available from: http://www.plasma-ald.com/?q=peald. 94. Dillon, A.C., et al., Surface chemistry of Al2O3 deposition using Al(CH3)3 and H2O in a binary reaction sequence. Surface Science, 1995. 322(1–3): p. 230-242. 95. Puurunen, R.L., Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process. Journal of applied physics, 2005. 97(12): p. 121301. 96. George, S.M., Atomic layer deposition: an overview. Chemical reviews, 2009. 110(1): p. 111-131. 97. Wind, R. and S. George, Quartz Crystal Microbalance Studies of Al2O3 Atomic Layer Deposition Using Trimethylaluminum and Water at 125° C†. The Journal of Physical Chemistry A, 2009. 114(3): p. 1281-1289. 98. Venables, J., Introduction to surface and thin film processes. 2000: Cambridge University Press. 99. Matero, R., et al., Effect of water dose on the atomic layer deposition rate of oxide thin films. Thin Solid Films, 2000. 368(1): p. 1-7. 100. Kim, S.K., et al., Low temperature (< 100 C) deposition of aluminum oxide thin films by ALD with O3 as oxidant. Journal of The Electrochemical Society, 2006. 153(5): p. F69-F76. 101. Widjaja, Y. and C.B. Musgrave, Quantum chemical study of the mechanism of aluminum oxide atomic layer deposition. Applied Physics Letters, 2002. 80(18): p. 3304-3306. 102. Yun, S.J., et al., Dependence of atomic layer-deposited Al2O3 films characteristics on growth temperature and Al precursors of Al (CH3) 3 and AlCl3. Journal of Vacuum Science & Technology A, 1997. 15(6): p. 2993-2997. 103. Groner, M., et al., Low-temperature Al2O3 atomic layer deposition. Chemistry of Materials, 2004. 16(4): p. 639-645. 104. Wang, X., et al., Improvement of blood compatibility of artificial heart valves via titanium oxide film coated on low temperature isotropic carbon. Surface and Coatings Technology, 2000. 128–129: p. 36-42. 105. Gibson, T.P., W.A. Briggs, and B.J. Boone, Delivery of di-2-ethylhexyl phthalate to patients during hemodialysis. The Journal of laboratory and clinical medicine, 1976. 87(3): p. 519-524. 106. Gieraltowska, S., et al., Properties and characterization of ALD grown dielectric oxides for MIS structures. arXiv preprint arXiv:1107.5401, 2011. 107. Jakschik, S., et al., Physical characterization of thin ALD–Al2O3 films. Applied Surface Science, 2003. 211(1–4): p. 352-359. 108. Barbos, C., et al., Al2O3 thin films deposited by thermal atomic layer deposition: Characterization for photovoltaic applications. Thin Solid Films. 109. Wang, P.C., et al., Effects of pre-sputtered Al interlayer on the atomic layer deposition of Al2O3 films on Mg–10Li–0.5Zn alloy. Applied Surface Science, 2013. 270: p. 452-456. 110. Naumann, V., et al., Interface and Material Characterization of Thin ALD-Al2O3 Layers on Crystalline Silicon. Energy Procedia, 2012. 27: p. 312-318. 111. Chang, M.L., et al., Improvement of oxidation resistance of copper by atomic layer deposition. Applied Surface Science, 2012. 258(24): p. 10128-10134. 112. Moret, M., et al., Atomic Layer Deposition of zinc oxide for solar cell applications. Superlattices and Microstructures, 2014. 75: p. 477-484. 113. Dobbelaere, T., et al., Plasma-enhanced atomic layer deposition of zinc phosphate. Journal of Non-Crystalline Solids, 2016. 444: p. 43-48. 114. Shan, C.X., X. Hou, and K.-L. Choy, Corrosion resistance of TiO2 films grown on stainless steel by atomic layer deposition. Surface and Coatings Technology, 2008. 202(11): p. 2399-2402. 115. Marin, E., et al., Chemical and electrochemical characterization of hybrid PVD + ALD hard coatings on tool steel. Electrochemistry Communications, 2009. 11(10): p. 2060-2063. 116. Fedel, M. and F. Deflorian, Electrochemical characterization of atomic layer deposited Al2O3 coatings on AISI 316L stainless steel. Electrochimica Acta. 117. Zhang, Y., et al., Electroplating to visualize defects in Al2O3 thin films grown using atomic layer deposition. Thin Solid Films, 2009. 517(11): p. 3269-3272. 118. Chang, M.L., et al., Investigation of defects in ultra-thin Al2O3 films deposited on pure copper by the atomic layer deposition technique. Applied Surface Science, 2015. 359: p. 533-542. 119. Zhang, Y., et al., Investigation of the defect density in ultra-thin Al 2 O 3 films grown using atomic layer deposition. Surface and Coatings Technology, 2011. 205(10): p. 3334-3339. 120. Schad, R., et al., Pinhole analysis in magnetic tunnel junctions. Applied Physics Letters, 2000. 76(5): p. 607-609. 121. Jen, S.-H., J.A. Bertrand, and S.M. George, Critical tensile and compressive strains for cracking of Al2O3 films grown by atomic layer deposition. Journal of Applied Physics, 2011. 109(8): p. 084305. 122. McClure, C.D., C.J. Oldham, and G.N. Parsons, Effect of Al2O3 ALD coating and vapor infusion on the bulk mechanical response of elastic and viscoelastic polymers. Surface and Coatings Technology, 2015. 261: p. 411-417. 123. Zhang, Y., et al., Fluorescent tags to visualize defects in Al2O3 thin films grown using atomic layer deposition. Thin Solid Films, 2009. 517(24): p. 6794-6797. 124. 楊政修, 增進鈦鎳形狀記憶合金抗沖蝕特性之研究, in 材料科學所. 2002, 逢甲大學: 台中市. p. 169. 125. SIGMA-ALDRICH. Trimethylaluminum. 2016; Available from: http://www.sigmaaldrich.com/catalog/product/aldrich/597775?lang=en®ion=TW. 126. Ultratech/CambridgeNanoTech. Thin Film Deposition - Savannah. 2014; Available from: http://www.cambridgenanotechald.com/thin-film-deposition.shtml#. 127. Henry, D. Wavelength-Dispersive X-Ray Spectroscopy (WDS). 2012; Available from: http://serc.carleton.edu/research_education/geochemsheets/wds.html. 128. Components, j.M.M. Measuring Transformation Temperatures in Nitinol Alloys. 2016; Available from: http://jmmedical.com/resources/211/Measuring-Transformation-Temperatures-in-Nitinol-Alloys.html. 129. corporation, S. X-ray Diffraction. 2015; Available from: http://www.shimadzu.com/an/elemental/xrd/onesight.html. 130. Wikipedia. X-ray photoelectron spectroscopy. 2016; Available from: https://en.wikipedia.org/wiki/X-ray_photoelectron_spectroscopy. 131. Lubomirsky, I., Manual Ellipsometer. 2016. 132. Wikipedia. Transmission electron microscopy. 2016; Available from: https://en.wikipedia.org/wiki/Transmission_electron_microscopy. 133. Materials, A. Attenuated Total Reflection (ATR) Mode – Advantages for FT-IR Spectroscopy. 2016; Available from: http://www.azom.com/article.aspx?ArticleID=5958. 134. Zhang, C. FTIR Spectrum. 2015; Available from: http://terpconnect.umd.edu/~zhangx/html/ftir.html. 135. Njobuenwu, D.O., E. Oboho, and R.H. Gumus, Determination of contact angle from contact area of liquid droplet spreading on solid substrate. Leonardo Electronic Journal of Practices and Technologies, 2007. 10: p. 29-38. 136. Karthega, M., V. Raman, and N. Rajendran, Influence of potential on the electrochemical behaviour of β titanium alloys in Hank’s solution. Acta Biomaterialia, 2007. 3(6): p. 1019-1023. 137. Kokubo, T. and H. Takadama, How useful is SBF in predicting in vivo bone bioactivity? Biomaterials, 2006. 27(15): p. 2907-2915. 138. Research, P.A. PARSTAT 4000+ Overview. 2010; Available from: http://www.princetonappliedresearch.com/Our-Products/Potentiostats/PARSTAT-4000.aspx. 139. Kahrilas, G. Inductively Coupled Plasma–Mass Spectrometry. 2016; Available from: https://icp-ms.wikispaces.com/. 140. Cao, Y., L. Nyborg, and U. Jelvestam, XPS calibration study of thin‐film nickel silicides. Surface and Interface Analysis, 2009. 41(6): p. 471-483. 141. Grosvenor, A.P., et al., New interpretations of XPS spectra of nickel metal and oxides. Surface Science, 2006. 600(9): p. 1771-1779. 142. Wang, R.M., et al., Surface XPS characterization of NiTi shape memory alloy after advanced oxidation processes in UV/H2O2 photocatalytic system. Applied Surface Science, 2007. 253(20): p. 8507-8512. 143. Ferguson, J., A. Weimer, and S. George, Atomic layer deposition of Al2O3 films on polyethylene particles. Chemistry of materials, 2004. 16(26): p. 5602-5609. 144. Goldstein, D.N., J.A. McCormick, and S.M. George, Al2O3 atomic layer deposition with trimethylaluminum and ozone studied by in situ transmission FTIR spectroscopy and quadrupole mass spectrometry. The Journal of Physical Chemistry C, 2008. 112(49): p. 19530-19539. 145. Rai, V.R., V. Vandalon, and S. Agarwal, Influence of surface temperature on the mechanism of atomic layer deposition of aluminum oxide using an oxygen plasma and ozone. Langmuir, 2011. 28(1): p. 350-357. 146. Wang, W., et al., Trimethylethoxysilane-modified super heat-resistant alumina aerogels for high-temperature thermal insulation and adsorption applications. RSC Advances, 2014. 4(97): p. 54864-54871. 147. Birnin-Yauri, U.A. and F.P. Glasser, Friedel’s salt, Ca2Al(OH)6(Cl,OH)·2H2O: its solid solutions and their role in chloride binding. Cement and Concrete Research, 1998. 28(12): p. 1713-1723. 148. Young, T., An essay on the cohesion of fluids. Philosophical Transactions of the Royal Society of London, 1805. 95: p. 65-87. 149. Wenzel, R.N., Resistance of solid surfaces to wetting by water. Industrial & Engineering Chemistry, 1936. 28(8): p. 988-994. 150. Cassie, A. and S. Baxter, Wettability of porous surfaces. Transactions of the Faraday Society, 1944. 40: p. 546-551. 151. Makkonen, L., Young’s equation revisited. Journal of Physics: Condensed Matter, 2016. 28(13): p. 135001. 152. Wikipedia. Hydrophobicity. 2015; Available from: https://zh.wikipedia.org/wiki/%E7%96%8F%E6%B0%B4%E6%80%A7. 153. Schroeder, H.A., J.J. Balassa, and I.H. Tipton, Abnormal trace metals in man — nickel. Journal of Chronic Diseases, 1962. 15(1): p. 51-65. 154. Bour, H., et al., Establishment of Nickel-Specific T Cell Lines from Patients with Allergic Contact Dermatitis: Comparison of Different Protocols. Clinical Immunology and Immunopathology, 1994. 73(1): p. 142-145. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78204 | - |
dc.description.abstract | 鎳鈦記憶合金為最被廣泛應用之形狀記憶合金,由於其優越的形狀記憶效應、超彈性效應、生物相容性等優點,於生醫領域上被廣泛使用。但由於鎳鈦合金之鎳元素會於人體內微量釋出,對人體有造成危害之疑慮,而已有數種研究透過表面改質來隔絕鎳釋出,但所使用表面改質技術如陽極處理(anode treatment)、微弧氧化(Micro Arc Oxidation, MAO)等方法,其沉積膜層厚度都十分地厚,很厚的陶瓷膜層會侷限鎳鈦合金之形狀記憶效應與超彈性效應等優點。因此本研究透過原子層沉積技術(Atomic Layer Deposition, ALD)於鎳鈦合金上沉積氧化鋁膜層,來探討奈米尺度下之膜層於承受應變量與隔絕鎳溶出之能力。
本研究以加熱式原子層沉積技術(Thermal mode ALD, T-ALD)沉積氧化鋁薄膜於鎳鈦合金上,比較表面沉積100, 200cycle氧化鋁薄膜之性質,評估方法為:化學組成、縱深分析、顯微組織觀察、彎曲測試、鎳溶出測試等,探討氧化鋁膜層應用於鎳鈦記憶合金之可能性。 實驗結果顯示,施鍍於鎳鈦合金上的氧化鋁膜層具有良好均勻的化學組成,沒有殘留副產物與殘碳物,而鎳鈦合金上的薄膜成長速率與同製程下Si wafer相同,因此可以透過Si wafer來鑑定膜層厚度。膜層與底材的介面十分地貼合,證明膜層沉積十分均勻。而鎳鈦合金表面屬於親水性,施鍍膜層厚表面變得較為疏水,但角度仍小於90˚,其中接觸角不會隨cycle上升而有大幅改變。彎曲測試中顯示出膜層具有一定變形能力,而隨著cycle上升所能承受之變形量下降。而施鍍的膜層能夠增加表面之抗腐蝕性,膜層越厚、抗腐蝕性質越好。ALD的氧化鋁膜層能夠有效地隔絕鎳溶出,而膜層厚度增加對於隔絕鎳溶出不會有明顯改變,只要施鍍均勻薄膜層就能有效隔絕鎳溶出。 | zh_TW |
dc.description.abstract | NiTi alloy is the most applicable shape memory alloy due to its wonderful properties of shape memory effect, pseudo-elasticity, biocompatibility, etc. It is usually used for biomedical applications. But NiTi alloy will slightly release Ni element which might hurt human body. Some documents point out that surface modification can reduce the amount of Ni release from NiTi alloy. The general methods in surface modification, like anode treatment or micro arc oxidation, will form a thick coating. This thick coating cannot bear large deformation strain. This problem seriously limits the shape memory effect and/or pseudo-elasticity of NiTi alloy. In this study, atomic layer deposition (ALD) was applied to deposit aluminum oxide (Al2O3) films on the surface of NiTi alloy. The ability of ALD-Al2O3 films to bear the deformation strain and the hindrance of Ni release from NiTi alloy were investigated.
In this research, thermal mode ALD (T-ALD, TMA/H2O) was used to deposit Al2O3 film on the surface of NiTi alloy with 100 and 200 deposition cycles for comparison. Several experiments, including chemical composition, film’s thickness, microstructure, bending test, Ni release test, etc, were carried out to evaluate the performance of ALD-Al2O3 films and understand the possibility of ALD-Al2O3 films on NiTi alloy for biomedical applications. Experimental results show that chemical compositions of ALD-Al2O3 films are well homogeneous. There are no retained carbon-residue and byproduct. The ALD film’s growth rate per cycle coated on the NiTi alloys is similar to that on the Si wafer, so the coating thickness can be measured by the Si wafer of the same process. The interface between the ALD film and Ni-Ti substrate fits well. It indicates that the ALD films are very homogenous. The alloy’s surfaces coated with ALD-Al2O3 and -TiO2 films exhibit more hydrophobic, although the water contact angle of all is smaller than 90˚. Besides, the water contact angle does not change obviously with the increase of film’s thickness. Bending test shows that the ALD-Al2O3 and -TiO2 films exhibit a fair adhesion performance. These ALD films could tolerate a suitable deformation strain. But, the tolerable deformation strain is reduced if the film’s thickness increases. These ALD films exhibit excellent corrosion resistance, and corrosion resistance is better with increasing cycles. The ALD films can effectively reduce Ni release. The reduced Ni release does not change with cycles. | en |
dc.description.provenance | Made available in DSpace on 2021-07-11T14:45:51Z (GMT). No. of bitstreams: 1 ntu-105-R03527014-1.pdf: 8540982 bytes, checksum: d23b90940c06e91eff0d7b03783303fe (MD5) Previous issue date: 2016 | en |
dc.description.tableofcontents | 致謝 I
摘要 II Abstract III 目錄 V 圖目錄 VII 表目錄 X 第一章 簡介與研究動機 1 第二章 基本性質及文獻回顧 2 2.1形狀記憶合金 2 2.1.1簡介 2 2.1.2熱彈性與非熱彈性麻田散體相變態 3 2.1.3形狀記憶效應與超彈性效應 6 2.1.4鎳鈦合金 12 2.1.5 鎳鈦合金之生醫發展與應用 15 2.1.6 鎳溶出與表面改質 17 2.2原子層沉積技術 18 2.2.1簡介 18 2.2.2加熱型原子層沉積技術 21 2.2.3氧化鋁薄膜之成長機制 24 2.2.4薄膜成長速率與溫度影響 28 2.3 原子層沉積技術之應用與研究 32 2.3.1鍍膜性質研究與應用 32 2.3.2 電化學 33 2.3.3 缺陷觀察 35 第三章 實驗方法與步驟 37 3.1 實驗流程 37 3.2實驗材料 38 3.3 原子層沉積系統及鍍膜參數 39 3.4.1 化學成分分析 40 3.4.2 相變化溫度分析 41 3.4.3 晶體結構分析 42 3.5 薄膜性質分析 43 3.5.1膜層厚度與化學成分量測 43 3.5.2 TEM分析 44 3.5.3 官能基分析 45 3.5.4 親疏水性分析 46 3.5.5 彎曲測試 47 3.5.6 抗腐蝕性測試 48 3.6 鎳溶出檢測 49 第四章 結果與討論 50 4.1 底材之基本性質分析 50 4.1.1化學成分分析 50 4.1.2 相變化溫度分析 51 4.1.3 晶體結構分析 52 4.2 薄膜性質分析 53 4.2.1 膜層厚度與化學成分量測 53 4.2.2 TEM分析 60 4.2.3 官能基分析 63 4.2.4 親疏水性分析 66 4.2.5 彎曲測試 70 4.2.6 抗腐蝕性測試 74 4.3 鎳溶出檢測 76 第五章 結論 78 第六章 未來持續研究工作 79 參考文獻 80 | |
dc.language.iso | zh-TW | |
dc.title | 原子層沉積技術於鎳鈦形狀記憶合金表面改質之研究 | zh_TW |
dc.title | Surface Modification of the NiTi Shape Memory Alloys by Atomic Layer Deposition Technique | en |
dc.type | Thesis | |
dc.date.schoolyear | 104-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 吳錫侃(Shyi-Kaan Wu),陳敏璋(Miin-Jang Chen),林昆明(Kuan-Ming Lin),張世航(Shih-Hang Chang) | |
dc.subject.keyword | 原子層沉積,鎳鈦形狀記憶合金,氧化鋁奈米鍍膜,鎳溶出, | zh_TW |
dc.subject.keyword | Atomic layer deposition,NiTi shape memory alloy,Al2O3 nano-film,Ni release, | en |
dc.relation.page | 90 | |
dc.identifier.doi | 10.6342/NTU201601082 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2016-07-21 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-105-R03527014-1.pdf 目前未授權公開取用 | 8.34 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。