請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/64621
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 張正憲 | |
dc.contributor.author | Bo-Wei Chen | en |
dc.contributor.author | 陳柏維 | zh_TW |
dc.date.accessioned | 2021-06-16T17:58:40Z | - |
dc.date.available | 2015-08-16 | |
dc.date.copyright | 2012-08-16 | |
dc.date.issued | 2012 | |
dc.date.submitted | 2012-08-10 | |
dc.identifier.citation | 1. Amirouche,F., Y. Zhou, and T. Johnson, Current micropump technologies and their biomedical applications. Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems,2009. 15(5): p. 647-666
2. Iverson, B.D. and S.V. Garimella, Recent advances in microscale pumping technologies: a review and evaluation. Microfluidics and Nanofluidics, 2008. 5(2): p. 145-174. 3. Nisar, A., et al., MEMS-based micropumps in drug delivery and biomedical applications. Sensors and Actuators B-Chemical, 2008. 130(2): p. 917-942. 4. Tsai, N.C. and C.Y. Sue, Review of MEMS-based drug delivery and dosing systems. Sensors and Actuators a-Physical, 2007. 134(2): p. 555-564. 5. Zhang, C.S., D. Xing, and Y.Y. Li, Micropumps, microvalves, and micromixers within PCR microfluidic chips: Advances and trends. Biotechnology Advances, 2007. 25(5): p. 483-514. 6. Gretillat, M.A., F. Gretillat, and N.F. de Rooij, Micromechanical relay with electrostatic actuation and metallic contacts. Journal of Micromechanics and Microengineering, 1999. 9(4): p. 324-331. 7. Machauf, A., Y. Nemirovsky, and U. Dinnar, A membrane micropump electrostatically actuated across the working fluid. Journal of Micromechanics and Microengineering, 2005. 15(12): p. 2309-2316. 8. Lee, S. and K.J. Kim, Design of IPMC actuator-driven valve-less micropump and its flow rate estimation at low Reynolds numbers. Smart Materials & Structures, 2006. 15(4): p. 1103-1109. 9. Olsson, A., G. Stemme, and E. Stemme, A valve-less planar fluid pump with two pump chambers. Sensors and Actuators a-Physical, 1995. 47(1-3): p. 549-556. 10. Stemme, E. and G. Stemme, A valveless diffuser/nozzle-based fluid pump. Sensors and Actuators a-Physical, 1993. 39(2): p. 159-167. 11. Linnemann, R., et al. A self-priming and bubble-tolerant piezoelectric silicon micropump for liquids and gases. 1998. 12. Pan, T.R., et al., A magnetically driven PDMS micropump with ball check-valves. Journal of Micromechanics and Microengineering, 2005. 15(5): p. 1021-1026. 13. Hsu, C.J. and H.J. Sheen, A microfluidic flow-converter based on a double-chamber planar micropump. Microfluidics and Nanofluidics, 2009. 6(5): p. 669-678. 14. Bringley, T.T., et al., An experimental investigation and a simple model of a valveless pump. Physics of Fluids, 2008. 20(3). 15. Forouhar, A.S., et al., The embryonic vertebrate heart tube is a dynamic suction pump. Science, 2006. 312(5774): p. 751-753. 16. Olsson, A., et al., Micromachined flat-walled valveless diffuser pumps. Journal of Microelectromechanical Systems, 1997. 6(2): p. 161-166. 17. 李俊賢, 可攜式無閥壓電微幫浦之設計製作與應用. 國立台灣大學應用力學研究所碩士論文, 2003. 18. 謝明哲, 無閥式微幫浦之腔體設計與作動機制研究. 國立台灣大學應用力學研究所碩士論文, 2009. 19. 蔡文惠, 進出口設計對無閥式微幫浦效能影響之實驗探討. 國立台灣大學應用力學研究所碩士論文, 2010. 20. Teng Yong Ng, D.X., Khin Yong Lam., United state patent (Patent No.: US 6910869), Institute of High Performance Computing, Singapore. 2005. 21. Yoon, J.S., et al., A valveless micropump for bidirectional applications. Sensors and Actuators a-Physical, 2006. 135(2): p. 833-838. 22. Izzo, I., et al., Modeling and experimental validation of a piezoelectric micropump with novel no-moving-part valves. Sensors and Actuators a-Physical, 2007. 133(1): p. 128-140. 23. Lee, C.J., et al., A study of PZT valveless micropump with asymmetric obstacles. Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, 2009. 15(7): p. 993-1000. 24. Olsson, A., G. Stemme, and E. Stemme, Numerical and experimental studies of flat-walled diffuser elements for valve-less micropumps. Sensors and Actuators, 2000. Vol.84: p. 165-175. 25. Fan, B., G. Song, and F. Hussain, Simulation of a piezoelectrically actuated valveless micropump. Smart Materials & Structures, 2005. Vol.14: p. 400-405. 26. Pan, L.S., T.Y. Ng, X.H. Wu, and H.P. Lee, Analysis of valveless micropumps with inertial effects. Journal of Micromechanics and Microengineering, 2003. Vol.13: p. 390-399. 27. Yang, K.S., I.Y. Chen, and C.C. Wang, Performance of nozzle/diffuser micro-pumps subject to parallel and series combinations. Chemical Engineering & Technology, 2006. 29(6): p. 703-710. 28. Olsson, A., G. Stemme, and E. Stemme, A numerical design study of the valveless diffuser pump using a lumped-mass model. Journal of Micromechanics and Microengineering, 1999. 9(1): p.34-44. 29. Ha Dong-Ho, et al., Three-dimensional electro-fluid-strectural interaction simulation for pumping performance evaluation of a valveless micropump. Smart Materials & Structures, 2009. 18(4): p. 15-22. 30. Nguyen, T.T. and N.S. Goo, A Novel PDMS valveless micropump with a circular lightweight piezo-composite actuator. Key Engineering Materials, 2006. 321-323: p. 245-248. 31. 林家祥, 進出口設計對無閥式微幫浦效能影響之數值模擬. 國立台灣大學應用力學研究所碩士論文, 2011. 32. ANSYS CFX User Manuals. 33. CFDRC V2004 User Manuals. 34. Documentation for ANSYS: Coupled Field Analysis Guide. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/64621 | - |
dc.description.abstract | 本文利用商業軟體ANSYS作為數值模擬的工具,對噴嘴/擴散器式的壓電無閥式微幫浦作數值模擬分析,藉由改變進、出口噴嘴/擴散器的夾角變化,探討其對微幫浦性能的影響。除了比對實驗的流量之外,同時將模擬計算出的流場與實驗上的流場顯影作比較與討論,並分析流場中的渦旋的位置與漩度,討論渦漩對於流量的影響。
與一般常用的模擬微幫浦之方法不同,本文的模型沒有經過簡化,而是考慮壓電材料與微幫浦之間的電、流、固多重耦合分析。本文處理流固耦合所使用的模擬計算方法也有別於一般CFD軟體的移動邊界(moving boundary),而是透過ANSYS與ANSYS CFX將結構場與流場結合的同步雙向耦合,比起一般的移動邊界法,本文所得到的流場更為擬真且可信。 由數值計算結果可以發現,進、出口噴嘴/擴散器的夾角為52.5°時有最佳的流量,經由流場的觀察與分析,其原因是因為進出口端噴嘴/擴散器靠近,使得進出口端的接觸較早,相互作用較為劇烈,使得流體由進口端流入後就會被帶往出口端,相較於進、出口噴嘴/擴散器的夾角為180°時,流體由進口端流到出口端相對容易,距離較短,且速度較快。 | zh_TW |
dc.description.abstract | This paper used ANSYS software to analyzes efficiency of valveless nozzle/diffuser-based micropump by changing the angle of inlet and outlet. This paper not only compared the flow rate with experiment, but also discussed and analyzed the property of fluid field, including vortex position and vorticity in the chamber of micropump.
Unlike the general method in the simulation of micropump, the simulating model in this study is built to be more complete. Not only piezoelectric materials, the structure of micropump, and the flow field are considered here. Also, the braking method is much different from the traditional one. Instead of moving boundary method, the interaction of the electric field, flow field and the structure is considered in this paper. Besides, the simulation results are much better and believable. According to the result of the simulations, we found that when close the angle of inlet and outlet to 52.5o, the flow rate was the best, because the outlet vortex and the inlet vortex approach earlier than other cases, and it causes the stronger interaction, when the fluid comes into chamber from inlet, it will be lead to the outlet soon, compare with other cases, the velocity of fluid is fast, and the distance of the path is short. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T17:58:40Z (GMT). No. of bitstreams: 1 ntu-101-R99543062-1.pdf: 7418930 bytes, checksum: c6cadb52d7c630ee0e27a2dc26f2d604 (MD5) Previous issue date: 2012 | en |
dc.description.tableofcontents | 致謝 I
摘要 III ABSTRACT IV 目錄 V 圖目錄 VIII 表目錄 XI 符號表 XII 第一章 導論 1 1.1 前言 1 1.2 文獻回顧 2 1.2.1 驅動方式簡介 2 1.2.2 微閥門簡介 3 1.2.3 無閥式微幫浦之文獻回顧 4 1.2.4 無閥式微幫浦之數值模擬文獻回顧 5 1.3 研究動機 7 第二章 理論基礎 8 2.1 無閥式微幫浦基本工作原理 8 2.2 噴嘴/擴散器理論分析 9 2.3 壓電、結構、流體之相互耦合作用分析 12 2.3.1 壓電與結構耦合 12 2.3.2 流場與結構耦合 13 2.3.3 邊界條件 14 第三章 數值方法與模擬設定 15 3.1 數值方法 16 3.1.1 有限體積法 16 3.1.2 收斂標準 18 3.2 實驗模型與模擬設定 19 3.2.1 模擬基本假設 20 3.2.2 模擬模型基本設定 20 3.2.3 模擬參數設定 22 3.2.4 進、出口噴嘴/擴散器的夾角改變之模擬設定 22 第四章 模擬結果與討論 23 4.1 數值模擬計算結果 23 4.1.1 流量計算結果與討論 23 4.1.2 旋轉角為180°之流場分析 25 4.1.3 旋轉角改變在共振頻時之流場分析 27 4.2 旋轉角為180°之渦眼位置分析 28 4.2.1 各頻率出口端渦眼位置分析 28 4.2.2 渦眼平均位置 29 4.3 旋轉角為180°之漩度分析 31 4.3.1 各頻率漩度趨勢與分析 31 4.3.2 各頻率平均漩度比較 31 第五章 結論與未來展望 32 5.1 結論 32 5.2 未來展望 34 參考文獻 77 | |
dc.language.iso | zh-TW | |
dc.title | 進出口的夾角設計對無閥式微幫浦效能影響之數值模擬 | zh_TW |
dc.title | Numerical Simulations on the Effect of the Angle between the Inlet and the Outlet of a Valveless Micropump | en |
dc.type | Thesis | |
dc.date.schoolyear | 100-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 吳光鐘,王安邦,趙聖德,黃冠榮 | |
dc.subject.keyword | 無閥式微幫浦,噴嘴/擴散器,旋轉角, | zh_TW |
dc.subject.keyword | Valveless Micropump,nozzle/diffuser, | en |
dc.relation.page | 80 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2012-08-10 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 應用力學研究所 | zh_TW |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-101-1.pdf 目前未授權公開取用 | 7.25 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。