請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/58766
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林怡成(Yi-Cheng Lin) | |
dc.contributor.author | Yi-Fong Lu | en |
dc.contributor.author | 盧宜鋒 | zh_TW |
dc.date.accessioned | 2021-06-16T08:29:52Z | - |
dc.date.available | 2019-01-27 | |
dc.date.copyright | 2014-01-27 | |
dc.date.issued | 2013 | |
dc.date.submitted | 2014-01-01 | |
dc.identifier.citation | [1] E. Levine, G. Malamud, S. Shtrikman, and D. Treves, “A study of microstrip array antennas with the feed network,” IEEE Trans. Antennas Propag., vol. 37, no. 4, pp. 426−434, Apr. 1989.
[2] R. C. Johnson and H. Jasik, Antenna Engineering Handbook, 3rd ed. New York: McGraw-Hill, 1993, Ch. 17. [3] A. W. Rudge, “Offset-parabolic-reflector antennas: a review,” Proc. IEEE, vol. 66, pp. 1592−1618, Dec. 1978. [4] D. M. Pozar and T. A. Metzler, “Analysis of a reflectarray antenna using microstrip patches of variable size,” Electron. Lett., vol. 29, no. 8, pp. 657−658, Apr. 1993. [5] R. D. Javor, X.-D. Wu, and K. Chang, “Design and performance of a microstrip reflectarray antenna,” IEEE Trans. Antennas Propag., vol. 43, no. 9, pp. 932−939, Sept. 1995. [6] K. C. Gupta, “Narrow-beam antennas using an artificial dielectric medium with permittivity less than unity,” Electron. Lett., vol. 7, pp. 16–18, Jan. 1971. [7] P. Burghignoli, G. Lovat, F. Capolino, D. R. Jackson, and D. R. Wilton, “Directive Leaky-Wave Radiation From a Dipole Source in a Wire-Medium Slab,” IEEE Trans. Antennas Propag., vol. 56, no. 5, pp. 1329–1339, May 2008. [8] H. Zhou, Z. Pei, S. Qu, S. Zhang, J. Wang, Z. Duan, H. Ma, and Z. Xu, “A novel high-directivity microstrip patch antenna based on zero-index metamaterial,” IEEE Antennas Wireless Propag. Lett., vol. 8, pp. 538–541, 2009. [9] H. Xu, Z. Zhao, Y. Lv, C. Du, and X. Luo, “Metamaterial superstrate and electromagnetic band-gap substrate for high directive antenna,” Int. J. Infrared, Milli. Waves, vol. 29, pp. 493–498, 2008. [10] G. V. Trentini, “Partially reflective sheet arrays,” IRE Trans. Antennas Propag., vol. AP-4, no. 6, pp. 666–671, Oct. 1956. [11] J. R. James, S. J. A. Kinany, P. D. Peel, and G. Andrasic, “Leaky-wave multiple dichroic beamformers,” Electron. Lett., vol. 25, no. 18, pp. 1209–1211, Aug. 1989. [12] A. Foroozesh and L. Shafai, “Investigation into the effects of the patch-type FSS superstrate on the high-gain cavity resonance antenna design,” IEEE Trans. Antennas Propag., vol. 58, no. 2, pp. 258–270, Feb. 2010. [13] A. Foroozesh and L. Shafai, “Investigation into the effects of reflection phase characteristics of highly-reflective superstrates on resonant cavity antennas,” IEEE Trans. Antennas Propag., vol. 58, no. 10, pp. 3392–3396, Oct. 2010. [14] A. Foroozesh and L. Shafai, “On the characteristics of the highly directive resonant cavity antenna having metal strip grating superstrate,” IEEE Trans. Antennas Propag., vol. 60, no. 1, pp. 78–91, Jan. 2012. [15] G. Lovat, P. Burghignoli, and D. R. Jackson, “Fundamental properties and optimization of broadside radiation from uniform leaky-wave antennas,” IEEE Trans. Antennas Propag., vol. 54, no. 5, pp. 1442–1452, May 2006. [16] D. R. Jackson and N. G. Alexopoulos, “Gain enhancement methods for printed circuit antennas,” IEEE Trans. Antennas Propag., vol. AP-33, no. 9, pp. 976–987, Sept. 1985. [17] N. G. Alexopoulos and D. R. Jackson, “Fundamental superstrate (cover) effects on printed circuit antennas,” IEEE Trans. Antennas Propag., vol. AP-32, no. 8, pp. 807–816, Sept. 1984. [18] W. Tan, Z. Shen, and Z. Shao, “Radiation of high-gain cavity-backed slot antennas through a two-layer superstrate” IEEE Antennas Propag. Magazine, vol. 50, no. 3, pp. 78–87, Jun. 2008. [19] A. A. Eldek, “Design of a high-gain cavity-backed slot antenna with mushroom cells and bent ground walls,” Prog. Electromagn. Res. Lett., vol. 20, 69–76, 2011. [20] H. Y. Yang and N. G. Alexopoulos, “Gain enhancement methods for printed circuit antennas through multiple superstrates,” IEEE Trans. Antennas Propag., vol. AP-35, no. 7, pp. 860–863, Sept. 1987. [21] M. Thevenot, C. Cheype, A. Reineix, and B. Jecko, “Directive photonic-bandgap antennas,” IEEE Trans. Microwave Theory Tech., vol. 47, no. 11, pp. 2115–2122, Nov. 1999. [22] H. Attia, L. Yousefi, and O. Ramahi, “High-gain patch antennas loaded with high characteristic impedance superstrates,” IEEE Antennas Propag. Lett., vol. 10, pp.858–861, 2011. [23] R. Gardelli, M. Albani, and F. Capolino, “Array thinning by using antennas in a Fabry-Perot cavity for gain enhancement,” IEEE Trans. Antennas Propag., vol. 54, no. 7, pp. 1979–1990, Jul. 2006. [24] L. Leger, T. Monediere, and B. Jecko, “Enhancement of gain and radiation bandwidth for a planar 1-D EBG antenna,” IEEE Microwave Wireless Compon. Lett., vol. 15, no. 9, pp. 573–575, Sept. 2005. [25] L. Leger, C. Serier, R. Chantalat, M. Thevenot, T. Monediere, and B. Jecko, “1D dielectric electromagnetic band gap (EBG) resonator antenna design,” Annals Télécommun., vol. 59, no. 3–4, pp. 242-260, Mar. –Apr. 2004. [26] C. Serier, C. Cheype, R. Chantalat, M. Thevenot, T. Monediere, A. Reineix, and B. Jecko, “1D photonic bandgap resonator antenna,” Microwave Opt. Tech. Lett., vol. 29, no. 5, pp. 312–315, Jun. 2001. [27] A. R. Weily, K. P. Esselle, B. C. Sanders, and T. S. Bird, “High-gain 1D EBG resonator antenna,” Microwave Opt. Tech. Lett., vol. 47, no. 2, pp. 107–114, Oct. 2005. [28] R. Sauleau and P. Coquet, “Input impedance of electromagnetic bandgap resonator antennas,” Microwave Opt. Tech. Lett., vol. 41, no. 5, pp. 369–375, Jun. 2004. [29] C. Cheype, C. Serier, M. Thevenot, T. Monediere, A. Reineix, and B. Jecko, “An electromagnetic bandgap resonator antenna,” IEEE Trans. Antennas Propag., vol. 50, no. 9, pp. 1285–1290, Sept. 2002. [30] P. d. Maagt, R. Gonzalo, Y. C. Vardaxoglou, and J.-M. Baracco, “Electromagnetic bandgap antennas and components for microwave and (sub)millimeter wave applications,” IEEE Trans. Antennas Propag., vol. 51, no. 10, pp. 2667–2677, Oct. 2003. [31] Y. J. Lee, J. Yeo, R. Mittra, and W. S. Park, “Application of electromagnetic bandgap (EBG) superstrates with controllable defects for a class of patch antennas as spatial angular filters,” IEEE Trans. Antennas Propag., vol. 53, no. 1, pp. 224–235, Jan. 2005. [32] N. Guerin, S. Enoch, G. Tayeb, P. Sabouroux, P. Vincent, and H. Legay, “A metallic Fabry-Perot directive antenna,” IEEE Trans. Antennas Propag., vol. 54, no. 1, pp. 220–224, Jan. 2006. [33] A. P. Feresidis and J. C. Vardaxoglou, “High gain planar antenna using optimised partially reflective surfaces,” Proc. Inst. Elect. Eng. Microw. Antennas Propag., vol. 148, no. 6, pp. 345–350, Dec. 2001. [34] S. J. Franson and R. W. Ziolkowski, “Gigabit per second data transfer in high-gain metamaterial structures at 60 GHz,” IEEE Trans. Antennas Propag., vol. 57, no. 10, pp. 2913–2925, Oct. 2009. [35] Y. J. Lee, J. Yeo, R. Mittra, and W. S. Park, “Design of a high-directivity electromagnetic band gap (EBG) resonator antenna using a frequency-selective surface (FSS) superstrate,” Microwave Opt. Tech. Lett., vol. 43, no. 6, pp. 462–467, Dec. 2004. [36] J. C. Iriarte, I. Ederra, R. Gonzalo, Y. Brand, A. Fourmault, Y. Demers, L. S.-Drioli, and P. de Maagt, “EBG superstrate array configuration for the WAAS space segment,” IEEE Trans. Antennas Propag., vol. 57, no. 1, pp. 81–93, Jan. 2009. [37] G. Zhao, Y.-C. Jiao, F. Zhang, and X. Yang, “High gain circularly polarized antenna using sub-wavelength resonant cavity,” J. Electromagn. Waves Appl., vol. 24, pp. 33–44, 2010. [38] M. Salah Toubet, M. Hajj, R. Chantalat, B. Jecko, and A. Elsayed Ahmad, “Generation of circuit polarization with low-profile EBG antenna,” in Proc. Eur. Conf. Antennas Propag. (EuCAP ’11), Rome, Italy, Apr. 11–15, 2011, pp. 1177–1180. [39] Z.-H. Wu and W.-X. Zhang, “A circularly polarized printed compound air-fed array antenna,” in Proc. Int. Conf. Electromagn. Adv. Applicat. (ICEAA ’10), Sydney, Australia, Sept. 20–24, 2010, pp. 337–340. [40] S. A. Muhammad, R. Sauleau, and H. Legay, “Compact metallic self-polarizing Fabry-Perot cavity antennas with small lateral size,” in Proc. Eur. Conf. Antennas Propag. (EuCAP ’11), Rome, Italy, Apr. 11–15, 2011, pp. 1878–1881. [41] S. A. Muhammad, R. Sauleau, L. L. Coq, and H. Legay, “Self-generation of circular polarization using compact Fabry-Perot cavity antennas,” IEEE Antennas Wireless Propag. Lett., Rome, Italy, vol. 10, pp. 907–910, 2011. [42] M. Diblanc, E. Rodes, E. Arnaud, M. Thevenot, T. Monediere, and B. Jecko, “Circularly polarized metallic EBG antenna,” IEEE Microwave Wireless Comp. Lett., vol. 15, no. 10, pp. 638–640, Oct. 2005. [43] S.-C. Chiu and S.-Y. Chen, “High-gain circularly polarized resonant cavity antenna using FSS superstrate,” in Proc. IEEE AP-S Int. Symp., Spokane, WA, Jul. 3–8, 2011, pp. 2242–2245. [44] A. P. Feresidis, G. Goussetis, S. Wang, and J. C. Vardaxoglou, “Artificial magnetic conductor surfaces and their application to low-profile high-gain planar antennas,” IEEE Trans. Antennas Propag., vol. 53, no. 1, pp. 209–215, Jan. 2005. [45] A. Foroozesh and L. Shafai, “Effects of artificial magnetic conductors in the design of low-profile high-gain planar antennas with high-permittivity dielectric superstrate,” IEEE Antennas Wireless Propag. Lett., vol. 8, pp. 10–13, 2009. [46] J. Yeo and D. Kim, “Novel design of a high-gain and wideband Fabry-Perot cavity antenna using a tapered AMC substrate,” J. Infrared, Milli. Terahertz Waves, vol. 30, pp. 217–224, 2009. [47] Z.-H. Wu, W.-X. Zhang, and D.-L. Fu, “A High-efficient compound printed air-fed array based on mushroom-AMC surface and its sub-array technique,” in Proc. IEEE AP-S Int. Symp., San Diego, CA, Jul. 5–11, 2008, pp. 1–4. [48] S. Wang, A. P. Feresidis, G. Goussetis, and J. C. Vardaxoglou, “High-gain subwavelength resonant cavity antennas based on metamaterial ground planes,” Proc. Inst. Elect. Eng. Microw. Antennas Propag., vol. 153, no. 1, pp. 1–6, Feb. 2006. [49] J. R. Kelly, T. Kokkinos, and A. P. Feresidis, “Analysis and design of sub-wavelength resonant cavity type 2-D leaky-wave antennas,” IEEE Trans. Antennas Propag., vol. 56, no. 9, pp. 2817–2825, Sept. 2008. [50] J. R. Kelly and A. P. Feresidis, “Low-profile high-gain sub-wavelength resonant cavity antennas for WiMAX applications,” in Proc. Eur. Conf. Antennas Propag. (EuCAP ’07), Edinburgh, UK, Nov. 11–16, 2007, pp. 1–5. [51] C. Mateo-Segura, G. Goussetis, and A. P. Feresidis, “Sub-wavelength profile 2-D leaky-wave antennas with two periodic layers,” IEEE Trans. Antennas Propag., vol. 59, no. 2, pp. 416–424, Feb. 2011. [52] D. Sievenpiper, L. Zhang, R. F. J. Broas, N. G. Alexópolous, and E. Yablonovitch, “High-impedance electromagnetic surfaces with a forbidden frequency band,” IEEE Trans. Microwave Theory Tech., vol. 47, no. 11, pp. 2059–2074, Nov. 1999. [53] G. Goussetis, A. P. Feresidis, and J. (Y.) C. Vardaxoglou, “Tailoring the AMC and EBG characteristics of periodic metallic arrays printed on grounded dielectric substrate,” IEEE Trans. Antennas Propag., vol. 54, no. 1, pp. 82–89, Jan. 2006. [54] F. Yang and Y. Rahmat-Samii, “Reflection phase characterizations of the EBG ground plane for low profile wire antenna applications,” IEEE Trans. Antennas Propag., vol. 51, no. 10, pp. 2691–2703, Oct. 2003. [55] A. Foroozesh, M. N. M. Kehn, and L. Shafai, “Application of artificial ground planes in dual-band orthogonally-polarized low-profile high-gain planar antenna design,” Progr. Electromagn. Res., vol. PIER-84, pp. 407–436, 2008. [56] D. Kim, “Novel dual-band Fabry-Pérot cavity antenna with low-frequency separation ratio,” Microwave Opt. Tech. Lett., vol. 51, no. 8, pp. 1869–1872, Aug. 2009. [57] A. Pirhadi, M. Hakkak, F. Keshmiri, and R. K. Baee, “Design of compact dual band high directive electromagnetic bandgap (EBG) resonator antenna using artificial magnetic conductor,” IEEE Trans. Antennas Propag., vol. 55, no. 6, pp. 1682–1690, Jun. 2007. [58] K. Yoo, R Mittra, and N. Farahat, “A novel technique for enhancing the directivity of microstrip patch antennas using an EBG superstrate,” in Proc. IEEE AP-S Int. Symp., San Diego, CA, Jul. 5–11, 2008, pp. 1–4. [59] A. Pirhadi, “Analysis and design of dual band high directivity EBG resonator antenna using square loop FSS as superstrate layer,” Progr. Electromagn. Res., vol. PIER-70, pp. 1–20, 2007. [60] A. Ourir, A. de Lustrac, and J.-M. Lourtioz, “All-metamaterial-based subwavelength cavities (λ/60) for ultrathin directive antennas,” Appl. Phys. Lett., no. 88, vol. 8, pp. 084103–1–3, 2006. [61] S. N. Burokur, A. Ourir, J.-P. Daniel, P. Ratajczak, and A. de Lustrac, “Highly directive ISM band cavity antenna using a bi-layered meta-surface reflector,” Microw. Opt. Tech. Lett., vo. 51, no. 6, pp. 1393–1396, Jun. 2009. [62] Y. Sun, Z. N. Chen, Y. Zhang, H. Chen, and T. S. P. See, “Sub-wavelength substrate-integrated Fabry-Perot cavity antennas using artificial magnetic conductor,” IEEE Trans. Antennas Propag., vol. 60, no. 1, pp. 30–35, Jan. 2012. [63] R. Yahiaoui, S. N. Burokur, and A. de Lustrac, “Enhanced directivity of ultra-thin metamaterial-based cavity antenna fed by multisource,” Electron. Lett., vol. 45, no. 16, pp. 493–494, 2009. [64] Y. Li and K. P. Esselle, “Small EBG resonator high-gain antenna using in-phase highly-reflecting surface,” Electron. Lett., vol. 45, no. 21, pp. 1058–1060, Oct. 2009. [65] A. Ourir, S. N. burokur, and A. de Lustrac, “Phase-varying metamaterial for compact steerable directive antennas,” Electron. Lett., vol. 43, no. 9, pp. 493–494, Apr. 2007. [66] L. Moustafa and B. Jecko, “Design of a wideband highly directive EBG antenna using double-layer frequency selective surfaces and multifeed technique for application in the Ku-band,” IEEE Antennas Wireless Propag. Lett., vol. 9, pp. 342–346, 2010. [67] L. Leger, T. Monediere, and B. Jecko, “Enhancement of gain and radiation bandwidth for a planar 1-D EBG antenna,” IEEE Microw. Wireless Compon. Lett., vol. 15, no. 9, pp. 573–575, Sept. 2005. [68] E. Rodes, M. Diblanc, E. Arnaud, T. Monediere, and B. Jecko, “Dual-band EBG resonator antenna using a single-layer FSS,” IEEE Antennas Wireless Propag. Lett., vol. 6, pp. 368–371, 2007. [69] A. Kanso, R. Chantalat, M. Thevenot, T. Monediere, and B. Jecko, “EBG dual band antenna using two layer FSS to feed a reflector antenna,” in Proc. IEEE AP-S Int. Symp., Toronto, Canada, Jul. 11–17, 2010, pp. 1–4 [70] D.H. Lee, Y.J. Lee, J. Yeo, R. Mittra and W.S. Park, “Design of novel thin frequency selective surface superstrates for dual-band directivity enhancement,” Proc. Inst. Elect. Eng. Microw. Antennas Propag., vol. 1, no. 1, pp. 248–254, Feb. 2007. [71] C. Huang, Z. Zhao, and X. Luo, “Dual band directive patch antenna based on the cut wire pairs structure,” Microwave Opt. Tech. Lett., vol. 52, no. 1, pp. 160–163, Jan. 2010. [72] A. P. Feresidis, and J. C. Vardaxoglou, “A broadband high-gain resonant cavity antenna with single feed,” in Proc. Eur. Conf. Antennas Propag. (EuCAP ’06), Nice, France, Nov. 6–10, 2006, pp. 1–5. [73] Y. Ge, K. P. Esselle, and T. S. Bird, “The use of simple thin partially reflective surfaces with positive reflection phase gradients to design wideband, low-profile EBG resonator antennas,” IEEE Trans. Antennas Propag., vol. 60, no. 2, pp. 743–750, Feb. 2012. [74] T.-H. Vu, K. Mahdjoubi, A.-C. Tarot, and S. Collardey, “Bandwidth enlargement of planar EBG antennas,” in Proc. Loughborough Antennas Propag. Conf. (LAPC ’07), Loughborough, UK, Apr. 2–3, pp. 125–128. [75] L. Moustafa and B. Jecko, “Bandwidth improvement of EBG resonator antennas using double-layer FSS,” Int. J. Antennas Propag., vol. 2008, Article ID 315052, 5 pages, 2008. [76] L. Moustafa and B. Jecko, “EBG structure with wide defect band for broadband cavity antenna applications,” IEEE Antennas Wireless Propag. Lett., vol. 7, pp. 693–696, 2007. [77] Y.-F. Lu and Y.-C. Lin, “Design and implementation of broadband partially reflective surface antenna,” in Proc. IEEE AP-S Int. Symp., Spokane, WA, Jul. 3–8, 2011, pp. 2250–2253. [78] R. Sauleau, P. Coquet, D. Thouroude, and J.-P. Daniel, “Beam focusing using 60 GHz Fabry-Perot resonators with uniform and non-uniform metal grids,” Electron. Lett., vol. 39, no. 4, pp. 341–342, Feb. 2003. [79] R. Sauleau, P. Coquet, T. Matsui, and J.-P. Daniel, “A new concept of focusing antennas using plane-parallel Fabry–Perot cavities with nonuniform mirrors,” IEEE Trans. Antennas Propag., vol. 51, no. 11, pp. 3171–3175, Nov. 2003. [80] Y. Ge, K. P. Esselle, and Y. Hao, “Design of low-profile high-gain EBG resonator antennas using a genetic algorithm,” IEEE Antennas Wireless Propag. Lett., vol. 6, pp. 480–483, 2007. [81] A. R. Weily, T. S. Bird, and Y. J. Guo, “A reconfigurable high-gain partially reflecting surface antenna,” IEEE Trans. Antennas Propag., vol. 56, no. 11, pp. 3382–3390, Nov. 2008. [82] A. Ourir, S. N. Burokur and A. de Lustrac, “Electronically reconfigurable metamaterial for compact directive cavity antennas,” Electron. Lett., vol. 43, no. 13, pp. 698–700, Jun. 2007. [83] N. Tentillier, F. Krasinski, R. Sauleau, B. Splingart, H. Lhermite, and P. Coquet, “A liquid-crystal, tunable, ultra-thin Fabry-Perot resonator in Ka band,” IEEE Antennas Wireless Propag. Lett., vol. 8, pp. 701–704, 2009. [84] S. A. Muhammad, R. Sauleau, and H. Legay, “Small-size shielded metallic stacked Fabry–Perot cavity antennas with large bandwidth for space applications,” IEEE Trans. Antennas Propag., vol. 60, no. 2, pp. 792–802, Feb. 2012. [85] M. Hajj, R. Chantalat, M. Lalande, and B. Jecko, “Sectoral M-EBG antenna with multipolarization capabilities for WiMAX base stations,” Prog. Electromagn. Res. C, vol. 22, 211–229, 2011. [86] M. García-Vigueras, J. L. Gómez-Tornero, G. Goussetis, A. R. Weily, and Y. J. Guo, “1D-leaky wave antenna employing parallel-plate waveguide loaded with PRS and HIS,” IEEE Trans. Antennas Propag., vol. 59, no. 10, pp. 3687–3694, Oct. 2011. [87] M. Hajj, R. Chantalat, M. Salah Toubet, and B. Jecko, “Designing a partially reflective surface for tri-band sectoral antennas,” in Proc. Eur. Conf. Antennas Propag. (EuCAP ’12), Prague, Czech, Mar. 26–30, 2012, pp. 2895–2899. [88] X. H. Wu, A. A. Kishk, and A. W. Glisson, “A transmission line method to compute the far-field radiation of arbitrarily directed Hertzian dipoles in a multilayer dielectric structure: theory and applications,” IEEE Trans. Antennas Propag., vol. 54, no. 10, pp. 2731–2741, Oct. 2006. [89] X. H. Wu, A. A. Kishk, and A. W. Glisson, “A transmission line method to compute the far-field radiation of arbitrary Hertzian dipoles in a multilayer structure embedded with PEC strip interfaces,” IEEE Trans. Antennas Propag., vol. 55, no. 11, pp. 3191–3198, Nov. 2007. [90] T. Zhao, D. R. Jackson, J. T. Williams, H.-Y. D. Yang, and A. A. Oliner, “2-D periodic leaky-wave antennas—Part I: metal patch design,” IEEE Trans. Antennas Propag., vol. 53, no. 11, pp. 3505–3514, Nov. 2005. [91] T. Zhao, D. R. Jackson, and J. T. Williams, “2-D periodic leaky-wave antennas—Part II: slot design,” IEEE Trans. Antennas Propag., vol. 53, no. 11, pp. 3515–3524, Nov. 2005. [92] T. Zhao, D. R. Jackson, J. T. Williams, and A. A. Oliner, “General formulas for 2-D leaky-wave antennas,” IEEE Trans. Antennas Propag., vol. 53, no. 11, pp. 3525–3533, Nov. 2005. [93] P. Burghignoli, G. Lovat, F. Capolino, D. R. Jackson, and D. R. Wilton, “Highly polarized, directive radiation from a Fabry-Pérot cavity leaky-wave antenna based on a metal strip grating,” IEEE Trans. Antennas Propag., vol. 58, no. 12, pp. 3873–3883, Dec. 2010. [94] T. Zhao, D. R. Jackson, J. T. Williams, and A. A. Oliner, “Simple CAD model for a dielectric leaky-wave antenna,” IEEE Antennas Wireless Propag. Lett., vol. 3, pp. 243–245, 2004. [95] Z.-G. Liu and T.-H. Liu, “Comparative study of Fabry-Perot resonator antenna with PMC and PEC ground plane,” Prog. Electromagn. Res. B, vol. 32, 299–317, 2011. [96] C. R. Brewitt-Taylor, “Limitation on the bandwidth of artificial perfect magnetic conductor surfaces,” Proc. Inst. Elect. Eng. Microw. Antennas Propag., vol. 1, no. 1, pp. 255–260, Feb. 2007. [97] M. F. Samani and R. Safian, “On bandwidth limitation and operating frequency in artificial magnetic conductors,” IEEE Antennas Wireless Propag. Lett., vol. 9, pp. 228–231, 2010. [98] A. Ip and D. R. Jackson, “Radiation from cylindrical leaky waves,” IEEE Trans. Antennas Propag., vol. 38, no. 4, pp. 482–488, Apr. 1990. [99] P. Kosmas, A. P. Feresidis, and G. Goussetis, “Periodic FDTD analysis of a 2-D leaky-wave planar antenna based on dipole frequency selective surfaces,” IEEE Trans. Antennas Propag., vol. 55, no. 7, pp. 2006–2012, Jul. 2007. [100] C. Mateo-Segura, M. García-Vigueras, G. Goussetis, A. P. Feresidis, and J. L. Gómez-Tornero, “Simple technique for the dispersion analysis of Fabry-Perot cavity leaky-wave antennas,” IEEE Trans. Antennas Propag., vol. 60, no. 2, pp. 803–810, Feb. 2012. [101] D. M. Pozar, Microwave Engineering, 2nd ed. New York: Wiley, 1998, pp. 328–332. [102] C. A. Balanis, Antenna Theory – Analysis and Design, 2nd ed. New York: Wiley, 1997, pp. 45–48. [103] A. Sutinjo, M. Okoniewski, and R. H. Johnston, “Beam-splitting condition in a broadside symmetric leaky-wave antenna of finite length,” IEEE Antennas Wireless Propag. Lett., vol. 7, pp. 609–612, 2008. [104] W. L. Stutzman and G. A. Thiele, Antenna Theory and Design, 2nd ed. New York: Wiley, 1998, pp. 76–81. [105] T. Akalin, J. Danglot, O. Vanbésien, and D. Lippens, “A highly directive dipole antenna embedded in a Fabry-Pérot type cavity,” IEEE Microwave Wireless Compon. Lett., vol. 12, no. 2, pp. 48–50, Feb. 2002. [106] C.-Y. Chiu, J.-B. Yan, and R. D. Murch, “Compact three-port orthogonally polarized MIMO antennas,” IEEE Trans. Antennas Wireless Propag. Lett., vol. 6, pp. 619–622, 2007. [107] B. Edward and D. Rees, “A broadband printed dipole with integrated balun,” Microw. J., pp. 339–344, May 1987. [108] H.-R. Chuang and L.-C. Kuo, “3-D FDTD design analysis of a 2.4-GHz polarization-diversity printed dipole antenna with integrated balun and polarization-switching circuit for WLAN and wireless communication applications,” IEEE Trans. Antennas Propag., vol. 51, no. 2, pp. 374–380, Feb. 2003. [109] L.-C. Kuo, H.-R. Chuang, Y.-C. Kan, T.-C. Huang, and C.-H. Ko, “A study of planar printed dipole antennas for wireless communication applications,” J. Electromagn. Waves Appl., vol. 21, no. 5, pp. 637–652, 2007. [110] R. Li, T. Wu, B. Pan, K. Lim, J. Laskar, and M. M. Tentzeris, “Equivalent-circuit analysis of a broadband printed dipole with adjusted integrated balun and an array for base station applications,” IEEE Trans. Antennas Propag., vol. 57, no. 7, pp. 2180–2184, Jul. 2009. [111] J. L. Volakis and Y. C. Lin, “TE characterization of resistive strip gratings on a dielectric slab using a single edge-mode expansion,” IEEE Trans. Antennas Propag., vol. 42, no. 2, pp. 205–212, Feb. 1994. [112] K. Sarabandi, “Scattering from variable resistive and impedance sheets,” J. Electromagn. Waves Applicat., vol. 4, no. 9, pp. 865–891, 1990. [113] H. Liu and R. Paknys, “Singularities of Floquet scattering solution for large cell spacings,” IEEE Trans. Antennas Propag., vol. 52, no. 6, pp. 1609–1611, Jun. 2004. [114] C. M. Butler, “General solutions of the narrow strip (and slot) integral equations,” IEEE Trans. Antennas Propag., vol. ap-33, no. 10, pp. 1085–1090, Oct. 1985. [115] L. B. Felsen and N. Marcuvitz, Radiation and Scattering of the Waves. New York: Wiley-IEEE Press, 1994, pp. 491–494. [116] Z.-G. Liu, W.-X. Zhang, D.-L. Fu, Y.-Y. Gu, and Z.-C. Ge, “Broadband Fabry-Perot resonator printed antennas using FSS superstrate with dissimilar size,” Microw. Opt. Technol. Lett., vol. 50, no. 6, pp.1623–1627, Jun. 2008. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/58766 | - |
dc.description.abstract | 在考慮天線有限的尺寸下,本論文針對正向輻射的空腔共振天線提出了一個簡單的模型與混合式設計方法作設計,該模型能夠快速且準確地估計出天線的指向度和孔徑效率,並因而得到最佳化部分反射面參數和天線尺寸之設計。在模型中,利用洩漏波之分析和傅立葉轉換,吾人能獲取天線最大指向度和所需天線尺寸之關係。本模型亦經由電磁全波模擬,驗證了所提出之模型的正確性。此外,經由模型所產生的設計曲線,本論文亦將天線進行實作與量測。由實驗數據證實本論文提出設計方法之可行性與模型之正確性。實驗數據顯示,此原型天線之增益可達到19.7 dBi,孔徑效率為74%。模型預測之結果和全波模擬與實驗結果皆有很好的一致性。
本論文亦探討天線饋入與激發結構之研究。一般常用的微帶線天線作激發,跟偶極天線相比,易因其基板的損失和表面波的產生使得天線增益降低。因此,我們選擇偶極天線作為空腔共振天線之激發,但它不利於雙極化天線的實現。將平衡非平衡轉換器導入偶極天線饋入,能經由兩埠饋入線交錯而避開饋入線碰撞之問題,且透過阻抗轉換器,阻抗匹配亦可順利達成。實驗結果證實,能達到20 dBi的天線增益,與超過23 dB的兩埠間隔離度。 本論文之另一重點是部分反射面之研究。相較於一般的單層部分反射面,雙層部分反射面經由設計能夠有零反射相位或正相位梯度的特性。前者可用於減少空腔共振天線的空氣腔高度,它由兩個週期且正交排列的條狀結構分別在介質板的上下所組成,一個是電感性,另一個則是電容性。根據部分反射面的等效電路模型,在設計流程中發現一種新型的人工磁導體部分反射面。新穎的部分反射面是由兩層具有相同的方向排列之週期條狀所構成的,換言之,在等效電路中其具有兩個電容性導納。透過全波模擬,新穎部分反射面與過去的相比,能實現更高的天線增益。之後將天線作量測,這裡部分反射面採用的尺寸為90毫米×90毫米。對於一般和新穎的人工磁導體部分反射面,實驗結果呈現在10.5 GHz的天線增益分別達到15.1 dBi和18.3 dBi。在增進天線頻寬之研究方面,吾人利用一般的人工磁導體部分反射面,將其金屬層交換放置,且經由適當之參數設計,可獲得反射相位隨頻率增加之部分反射面。根據部分反射面的等效電路,我們提供了一個解釋相位增加的原因。最後,實驗結果證實,與傳統單層部分反射面構成之天線相比,能得到約二倍之頻寬。 | zh_TW |
dc.description.abstract | We present a simple hybrid approach for the design of finite-size Fabry-Pérot antennas (FPAs), which are also called cavity resonant antennas, used for broadside radiation. The model provides an accurate estimation on the directivity and aperture efficiency, and hence may obtain the optimal configuration of the partially reflective surface (PRS) and the antenna dimensions. The overall FPA maximum directivity and the required dimensions are derived using leaky-wave analysis and the Fourier transform. The presented model was validated by conducting a full-wave simulation on a classic FPA structure. Additionally, from design curves of the presented model, a PCB-based patch-patterned FPA has been implemented and measured. The illustrated FPA prototype has a realized gain of 19.7 dBi with an aperture efficiency of 74%. The model predictions were very consistent with the full-wave simulation and measured results.
After discussing the directivity and its adapted aperture area, we focus on excitation structures. A patch source is compared with a dipole source, revealing a degradation of the gain for the patch source due to the substrate loss and the surface loss. Therefore, we chose the dipole source for antenna excitation. However, it is hard to be implemented on dual-polarization excitation for FPAs. The intersecting dipoles with fed baluns are presented for dual-polarization FPAs and the impedance matching can still be achieved by an impedance transformer. The experimental results show that a gain of 20 dBi and the isolation of two ports is good enough and better than 23 dB. Unlike the classic single-layered PRS, double-layered PRSs with reflection phase zero and positive phase gradient are proposed, respectively. The former can be used to reduce the FPA’s air-cavity height. It is comprised of two orthogonal periodic strips where one is inductive and the other is capacitive, etched on both sides of a dielectric slab, respectively. According to the PRS equivalent circuit model, the design guideline is presented, exploring a novel PRS with characteristics of artificial magnetic conductor (AMC) as well. The novel PRS is constituted of two layers of strip gratings with the same permuted direction, that is, the PRS comprises two capacitive screens. Through full-wave simulations, FPAs with novel PRSs have the advantages over traditional AMC-PRSs, with respect to achieving higher gains. Accordingly, PRS dimensions of 90 mm × 90 mm are employed here to verify an agreement between the measurement and simulation. The measurement demonstrates gains at 10.5-GHz as high as 15.1 dBi and 18.3 dBi for the traditional and novel AMC-PRSs, respectively. A PRS with a positive phase increment against frequencies can be used for bandwidth enhancement. Traditional AMC-PRS metallic layers can be placed upside down and modified adaptively to form the PRS with a positive phase gradient. According to the PRS equivalent circuit, we provide an explanation for the reason why the reflection phase of the presented PRS may increase against frequencies. Subsequently, experimental results validated the bandwidth enhancement by comparing the modified PRS to the conventional FPA with a single-layered PRS. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T08:29:52Z (GMT). No. of bitstreams: 1 ntu-102-D94942011-1.pdf: 1515021 bytes, checksum: 2a4c0da6aae7dbe903da76f2e90be7b1 (MD5) Previous issue date: 2013 | en |
dc.description.tableofcontents | 誌謝 i
摘要 iii Abstract v Contents vii List of Figures ix List of Tables xv Chapter 1 Introduction 1 1-1 Motivation 1 1-2 Literature Survey 2 1-3 Dissertation Organization 8 Chapter 2 Modeling of Infinite Fabry-Pérot Antennas 11 2-1 Fundamental Principle Based on Ray Tracing Method 11 2-2 Modeling with Transverse Equivalent Network 14 2-3 Modeling with Leaky Waves 21 Chapter 3 Modeling for Finite-Size Fabry-Pérot Antennas 29 3-1 Analysis for Estimating the Maximum Directivity and the Corresponding Antenna Size 30 3-2 Model Verification 39 3-3 Implementation and Experimental Results 45 3-4 Summary 49 Chapter 4 Dual-Polarized Fabry-Pérot Antenna with Dipole Excitation 50 4-1 Choice of Excited Source 50 4-2 Design of Dual-Polarization FPA with Dipole Excitation 54 4-2-1 Impedance Matching 54 4-2-2 Simulation and Experiment 59 4-3 Summary 64 Chapter 5 Fabry-Pérot Antennas Using PRSs of Artificial Magnetic Conductor Characteristics for Height Reduction 65 5-1 PRS Circuit Model 66 5-2 Effect of PMC-PRS Types on FPAs 75 5-3 Antenna Implementation 80 5-4 Summary 86 Chapter 6 Fabry-Pérot Antennas Using PRSs of Positive Phase Gradient for Bandwidth Enhancement 87 6-1 Broadband Design and Circuit Model 88 6-2 Experimental Results 94 6-3 Summary 98 Chapter 7 Conclusion 99 7-1 Summary and Comparison 99 7-2 Contribution 103 7-3 Future Work 103 Reference 105 Appendix A Scattered by Free-Standing Metal Strip Grating Using Single Edge-Mode Expansion 114 A-1 TE Scattering in the XZ-Plane 114 A-2 TM Scattering in the YZ-Plane 119 A-3 Examination 123 Publication List 126 | |
dc.language.iso | en | |
dc.title | 平面式高增益空腔共振天線之模型與最佳化設計 | zh_TW |
dc.title | Modeling and Optimal Design of Planar High-Gain Cavity Resonant (Fabry-Pérot) Antenna | en |
dc.type | Thesis | |
dc.date.schoolyear | 102-1 | |
dc.description.degree | 博士 | |
dc.contributor.oralexamcommittee | 張道治(Dau-Chyrh Chang),陳富強(Fu-Chiarng Chen),鄭瑞清(Jui-Ching Cheng),江簡富(Jean-Fu Kiang),丘增杰(Tsen-Chieh Chiu) | |
dc.subject.keyword | 天線,高增益,空腔共振,部分反射面, | zh_TW |
dc.subject.keyword | antenna,high gain,cavity resonant,partially reflective surface (PRS), | en |
dc.relation.page | 127 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2014-01-03 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電信工程學研究所 | zh_TW |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-102-1.pdf 目前未授權公開取用 | 1.48 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。