請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/4806
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 王倫(Lon A. Wang) | |
dc.contributor.author | Che-An Lin | en |
dc.contributor.author | 林哲安 | zh_TW |
dc.date.accessioned | 2021-05-14T17:47:39Z | - |
dc.date.available | 2018-03-13 | |
dc.date.available | 2021-05-14T17:47:39Z | - |
dc.date.copyright | 2015-03-13 | |
dc.date.issued | 2015 | |
dc.date.submitted | 2015-02-12 | |
dc.identifier.citation | [1] G. T. Reed, and A. P. Knights, “Silicon Photonics,” Wiley New York, 2004.
[2] P. J. A. Sazio, A. Amezcua-Correa, C. E. Finlayson, J. R. Hayes, T. J. Scheidemante, N. F. Baril, B. R. Jackson, D. J. Won, F. Zhang, E. R. Margine, V. Gopalan, V. H. Crespi, J. V. Badding, “Microstructured Optical Fibers as High-Pressure Microfluidic Reactors,” Science, vol. 311, pp. 1583–1586, 2006. [3] P. Mehta, N. Healy, N. F. Baril, P. J. A. Sazio, J. V. Badding, and A. C. Peacock, “Nonlinear transmission properties of hydrogenated amorphous silicon core optical fibers,” Optics Express, vol. 18, pp. 16826-16831, 2010. [4] L. Shen, N. Healy, P. Mehta, T. D. Day, J. R. Sparks, J. V. Badding, and A. C. Peacock, “Nonlinear transmission properties of hydrogenated amorphous silicon core fibers towards the mid-infrared regime,” Optics Express, vol. 21, pp.13075-13083, 2013. [5] N. Vukovic, N. Healy, P. Mehta, T. D. Day, P. J. A. Sazio, J. V. Badding, and A. C. Peacock, “Thermal nonlinearity in silicon microcylindrical resonators,” Applied Physics Letters, vol. 100, pp. 181101-1 – 181101-4, 2013. [6] A. B. Matsko and V. S. Ilchenko, “Optical Resonators With Whispering-Gallery Modes—Part I: Basics,” IEEE Journal of Selected Topics in Quantum Electronics, vol. 12, pp. 3-13, 2006. [7] V. S. Ilchenko and A. B. Matsko, “Optical Resonators With Whispering-Gallery Modes—Part II: Applications, ” IEEE Journal of Selected Topics in Quantum Electronics, vol. 12, pp. 15-32, 2006. [8] K. J. Vahala, “Optical Microcavities,” Nature, vol. 424, pp. 839-846, 2003. [9] M. Cai, O. Painter, and K. J. Vahala, “Observation of Critical Coupling in a Fiber Taper to a Silica-Microsphere Whispering-Gallery Mode System,” Physical Review Letters, vol. 85, pp. 74-77, 2000. [10] T. J. Kippenberg, S. M. Spillane, D. K. Armani, and K. J. Vahala, “Fabrication and coupling to planar high-Q silica disk microcavities,” Applied Physics Letters, vol. 83, pp. 797-799, 2003. [11] D. K. Armani, T. J. Kippenberg, S. M. Spillane & K. J. Vahala, “Ultra-high-Q toroid microcavity on a chip,” Nature, vol. 421, pp. 925-928, 2003. [12] F. Vollmer, D. Braun, A. Libchaber, M. Khoshsima, I. Teraoka, and S. Arnold, “Protein detection by optical shift of a resonant microcavity,” Applied Physics Letters, vol. 80, pp. 4057-4059, 2002. [13] Y. F. Xiao, C. H. Dong, C. L. Zou, Z. F. Han, L. Yang, and G. C. Guo, “Low-threshold microlaser in a high-Q asymmetrical microcavity,” Optics Letters, vol. 34, pp. 509-511, 2009. [14] Faraz Monifi, S. K. Ozdemir, and L. Yang, “Tunable add-drop filter using an active whispering gallery mode microcavity,” Applied Physics Letters, vol. 103, pp. 181103-1 – 181103-4, 2013. [15] O. Boyraz and B. Jalali, “Demonstration of a silicon Raman laser,” Optics Express, vol. 12, pp. 5269-5274, 2004. [16] M. Soltani, S. Yegnanarayanan and A. Adibi, “Ultra-high Q planar silicon microdisk resonators,” Optics Express, vol. 15, pp. 4694-4704, 2007 [17] H, Yi, D. S. Citrin, and Z. Zhou, “Highly sensitive silicon microring sensor with sharp asymmetrical resonance,” Optics Express, vol. 18, pp. 2967-2972, 2010. [18] N. Vukovic, N. Healy, P. Horak, J. R. Sparks, P. J. A. Sazio, J. V. Badding, and A. C. Peacock, “Ultra-smooth microcylindrical resonators fabricated from the silicon optical fiber platform,” Applied Physics Letters, vol. 99, pp. 031117-1 – 031117-3, 2011. [19] Y. O. Yilmaz, A. Demir, Student, A. Kurt, and A. Serpenguzel, “Optical Channel Dropping With a Silicon Microsphere,” IEEE Photonics Technology Letters, vol. 17, pp. 1662–1664, 2005. [20] E. Yuce, O. Gurlu, and A. Serpenguzel,, “Optical Modulation With Silicon Microspheres,” IEEE Photonics Technology Letters, vol. 21, pp. 1481-1483, 2009. [21] J. Ballato, T. Hawkins, P. Foy, R. Stolen, B. Kokuoz, M. Ellison, C. McMillen, J. Reppert, A. M. Rao, M. Daw, S. Sharma, R. Shori, O. Stafsudd, R. R. Rice, and D. R. Powers,“ Silicon optical fiber,” Optics Express, vol. 16, pp. 18675-18683, 2008. [22] B. Scott, K. Wang, V. Caluori, and G. Pickrell, “Fabrication of silicon optical fiber,” Optical Engineering Letters, vol. 48, pp. 100501-1 – 100501-3, 2009 [23] W. R. Mckee, “Development of the Spherical Silicon Solar Cell,” IEEE Transactions on Components, Hybrid, and Manufacturing Technology, vol. CHMT-5, pp. 336-341, 1982. [24] K.C. Kao and G.A. Hockham, “Dielectric-fibre surface waveguides for optical frequencies,” IEEE Proceedings, vol. 133, pp. 191-198, 1986. [25] D. J. Gardiner, P. R. Graves, H. J. Bowley , D. L. Gerrard, J. D. Louden, G. Turrell, “Practical Raman Spectroscopy,” Springer-Verlag, 1989 optical frequencies,” IEEE Proceedings, vol. 133, pp. 191-198, 1986. [26] D. J. Won, M. O. Ramirez, H. Kang, V. Gopalana, N. F. Baril, J. Calkins, J. V. Badding, and P. J. A. Sazio, “All-optical modulation of laser light in amorphous silicon-filled microstructured optical fibers,” Applied Physics Letters, vol. 91, pp. 161112-1 – 161112-3, 2007. [27] Y. Okada and Y. Tokumaru, “Precise determination of lattice parameter and thermal expansion coefficient of silicon between 300 and 1500 K,” Journal of Applied Physics, vol. 56, pp. 314-320, 1984. [28] B. H. W. S. D. Jong, R. G. C. Beerkens, P. A. V. Nijnatten, “Ullmann's encyclopedia of industrial chemistry,” Wiley, VCH, 2000. [29] F. Sugimoto and Y. Arimoto, “Bond Strength of Bonded SOI Wafers,” Japanese Journal of Applied Physics, vol. 31, pp. 975-978, 1992. [30] D. Liang, A. W. Fang, H. Park, T. E. Reynolds, K. Warner, D. C. Oakley, and J. E. Bowers, “Low-Temperature, Strong SiO2-SiO2 Covalent Wafer Bonding for III–V Compound Semiconductors-to-Silicon Photonic,” Journal of Electronic Materials, vol. 37, pp. 1552-1559, 2008 [31] J. Goldstein, D. E. Newbury, D. C. Joy , C. E. Lyman, P. Echlin, E. Lifshin, L. Sawyer, J.R. Michael, “Scanning electron microscopy and x-ray microanalysis,” Springer, 2003. [32] S. Morris, T. Hawkins, P. Foy, J. Hudson, L. Zhu, R. Stolen, R. Rice, and J. Ballat, “On loss in silicon core optical fibers,” Optical Materials Express, vol. 2, pp. 1511-1519, 2012. [33] A. Ghata, and K. Thyagarajan “An introduction to fiber optics,” ,1986. [34] N. Vukovic, N. Healy, P. Mehta, T. D. Day, P. J. A. Sazio, J. V. Badding, and A. C. Peacock, “Thermal nonlinearity in silicon microcylindrical resonators,” Applied Physics Letters, vol. 100, pp. 181101-1 – 181101-4, 2012. [35] L. Lagonigro, N. Healy, J. R. Sparks, N. F. Baril, P. J. A. Sazio, J. V. Badding, and A. C. Peacock, “Low loss silicon fibers for photonics applications,” Applied Physics Letters, vol. 96, pp. 041105-1 – 041105-3, 2010 . [36] N. Healy, J. R. Sparks, P. J. A. Sazio, J. V. Badding, and A. C. Peacock, “Tapered silicon optical fibers,” Optics Express, vol. 18, pp. 7596-7601, 2010. [37] V. R. Almeida, R. R. Panepucci, and M. Lipson, “Nanotaper for compact mode conversion,” Optics Letters, vol. 28, pp. 1302-1304, 2003. [38] E. C. Magi, L. B. Fu, H. C. Nguyen, M. R. E. Lamont, D. I. Yeom, and B. J. Eggleton, “Enhanced Kerr nonlinearity in sub-wavelength diameter As2Se3 chalcogenide fiber tapers,” Optics Express, vol. 15, pp. 10324-10329, 2007. [39] A. Sure, T. Dillon, J. Murakowski, C. Lin, D. Pustai and D. W. Prather, “Fabrication and characterization of three-dimensional silicon tapers,” Optics Express, vol. 11, pp. 3555-3561, 2003. [40] 卓士閔, “將光纖抽絲塔微小化以製作微奈米導光線與其應用, Fabrication of Micro/Nano Optical Wires Using the Miniaturization of Fiber Drawing Tower and Their Applications,” Doctoral Dissertation, 2012. [41] L. L. Jr. Blyler, F. V. DiMarcello, “Fiber drawing, coating, and jacketing,” Proceedings of the IEEE, vol. 68, pp. 1194-1198, 1980. [42] U. C. Paek, “High-speed High-Strength Fiber Drawing,” Journal of Lightwave Technology, vol. LT-4, pp. 1048-1060, 1986. [43] U. C. Paek, “Free drawing and polymer coating of silica glass optical fibers,” Journal of Heat Transfer, vol. 121, pp. 774-788, 1999. [44] U. C. Paek and R. B. Runk, “Physical behavior of the neck‐down region during furnace drawing of silica fibers,” Optical Fiber Transmission, pp. TuCl-1 – TuCl-4, 1977. [45] K. Imoto, M. Sumi, G. Toda, and T. Suganuma, “Optical Fiber Drawing Method with Gas Flow Controlling System,” Journal of Lightwave Technology, vol. 7, pp. 115-121, 1989. [46] S. Sakaguchi, and T. Kimura, “High-speed drawing of optical fibers with pressurized coating,” Journal of Lightwave Technology, vol. LT-3, pp. 669-673, 1985. [47] P. L. Chu, T. Whitbread, and P. M. Allen, “An on-line fiber drawing tension and diameter measurement device,” Journal of Lightwave Technology, vol. 7, pp. 255-261, 1989. [48] C. G. Askins, M. A. Putnam, and E. J. Friebele, “Noncontact measurement of optical fiber draw tension,” Journal of Lightwave Technology, vol. 9, pp. 945-947, 1991. [49] T. H. Shen and L. A. Wang, “A Two-Layer Microcoil Resonator With Very High Quality Factor,” IEEE Photonics Technology Letters, vol. 26, pp. 535-537, 2014. [50] C. Tsao, “oprical fibre waveguide analysis,” Oxford University Press, 1992. [51] L. Tong, J. Lou, and E. Mazur, “Single-mode guiding properties of subwavelength-diameter silica and silicon wire waveguides,” Optics Express, vol. 12, pp. 1025-1035, 2004. [52] L. Rayleigh, “The problem of the whispering gallery,” Scientific Papers, vol. 5, pp. 617-620, 1912. [53] A. N. Oraevsky, “whispering-gallery waves,” Quantum Electronics, vol. 32, pp. 377-400, 2002. [54] X. M. Wua, J. Y. Yuc, T. L. Rena, L. T. Liua, “Micro-Raman spectroscopy measurement of stress in silicon,” Microelectronics Journal, vol. 38, pp. 87-90, 2007. [55] A. Chiasera, Y. Dumeige, P. F’eron, M. Ferrari, Y. Jestin , G. N. Conti, S. Pelli, S.Soria, and G. C. Righini, “Spherical whispering-gallery-mode microresonators,” Laser and Photonics Reviews, vol. 4, pp. 457-482, 2010. [56] J. C. Knight, G. Cheung, F. Jacques, and T. A. Birks, “Phase-matched excitation of whispering-gallery-mode resonances by a fiber taper,” Optics Letters, vol. 22, pp. 1129-1131, 1997. [57] C. Grillet, S. N. Bian, E. C. Magi, and B. J. Eggleton, “Fiber taper coupling to chalcogenide microsphere modes,” Applied Physics Letters, vol. 92, pp. 171109-1 – 171109-3, 2008. [58] Y. C. Lin, M. H. Mao, Y. R. Lin, H. H. Lin, C. A. Lin, and L. A. Wang, “All-optical switching in GaAs microdisk resonators by a femtosecond pump–probe technique through tapered-fiber coupling,” Optics Letters, vol. 39, pp. 4998-5001, 2014. [59] G. Cocorullo, F. G. D. Cart, I. Rendina, and P. M. Sarro, “Thermo-optic effect exploitation in silicon rnicrostructures,” Sensor and Actuators A, vol. 71, pp. 19-26, 1998. [60] G. Cocorullo, and I. Rendina “Thermo-optical modulation at 1.5 μm in silicon etalon,” Electronics Letters, vol. 28, pp. 83-85, 1992. [61] H. Rong, A. Liu, R. Jones, O. Cohen, D. Hak, R. Nicolaescu, A. Fang, and M. Paniccia, “An all-silicon Raman laser,” Nature, vol. 433, pp. 292-294, 2005. [62] C. Y. Chao, and L. J. Guo, “Design and optimization of microring resonators in biochemical sensing applications,” Journal of Lightwave Technology, vol. 24, pp. 1395-1402, 2006. [63] K. De Vos, I. Bartolozzi, E. Schacht, P. Bienstman, and R. Baets, “Silicon-on-Insulator microring resonator for sensitive and label-free biosensing,” Optics Express, vol. 15, pp. 7610-7615, 2007. [64] Y. Huang, S. K.Kalyoncu, Q. Zhao, R. Torun, O. Boyraz, “Silicon-on-sapphire waveguides design for mid-IR evanescent field absorption gas sensors,” Optics Communications, vol. 313, pp. 186-194, 2013. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/4806 | - |
dc.description.abstract | 在本論文中,我們將粉末套管法與垂直下拉法做結合來製作單晶矽核光纖(silicon-cored fibers)。我們使用成本便宜許多的多晶矽粉來取代成本高昂的單晶矽棒或晶種來製作矽核光纖。藉由優化抽絲的相關參數後,可以成功製作出長度長達一公尺的單晶矽核光纖,也因為是單晶的原因,其傳輸損耗可以被降低到小於世界上其他的團隊。最後抽出來的矽核光纖其尺寸約為玻璃包覆層直徑100-300微米、矽核心直徑10-30微米。
我們根據先前製作玻璃微光纖的經驗與玻璃光纖抽絲系統來對矽核光纖做二次抽絲,並成功的製作出矽核錐狀光纖(silicon-cored tapered fiber)。使用氫氧焰當作熱源與電動馬達來當作移動源。已成功將一個原先尺寸為矽核心直徑20微米抽細到矽核心直徑2.6微米。 我們採用二氧化碳雷射來加熱矽核光纖中裸露的矽核心來快速製備具有高品質因子(quality factor)迴音廊模態(whispering gallery modes)的矽微米球共振腔(silicon microsphere resonator)。使用玻璃錐狀光纖耦合法來激發在矽微米球上的迴音廊模態,得到的最高品質因子為4 x 10<5>。本文中,也藉由熱光效應(thermo-optic effect)來探討關於在矽材料上的共振波長飄移現象。 | zh_TW |
dc.description.abstract | Single-crystal silicon-cored fibers were made by using a combined techniques of powder-in-tube and vertical-drawing. Much cheaper polycrystalline silicon powders substituting expensive single-crystal silicon powders or seed rods were packed into a fused silica tube. By optimizing the drawing parameters, meter-long silicon-cored fibers were obtained with ultralow transmission losses because the entire lengths of silicon cores were single crystalline. The Si-cored fibers were drawn with resultant silica cladding and Si core diameters being in the range of 100-300 microns and 10-30 microns, respectively.
We also demonstrated a fiber drawing system for fabricating Si cored tapered fiber. A fiber drawing system equipped with oxy-hydrogen flame and transition stage was used. According to the previously accumulated knowledge in fabrication of silica microfiber, we successfully fabricated Si cored tapered fibers with diameter of 2.6 microns in the waist section from an original Si-cored fiber with diameter of 20 microns. Silicon microsphere resonators which exhibited high quality factor (Q) whispering-gallery-modes (WGMs) could be rapidly fabricated from Si-cored fibers using CO2 laser reformation. WGMs were excited by using the tapered silica fiber coupling technique, and a record resonant Q as high as 4 x 10^5 was obtained. The shift of resonant wavelength caused by thermo-optic effect of Si material was also observed. | en |
dc.description.provenance | Made available in DSpace on 2021-05-14T17:47:39Z (GMT). No. of bitstreams: 1 ntu-104-R01941085-1.pdf: 4147917 bytes, checksum: 3dcdd6499cbf3960fc1e8a34e829da7f (MD5) Previous issue date: 2015 | en |
dc.description.tableofcontents | 誌謝 i
中文摘要 ii ABSTRACT iii Statement of Contributions……………………………………………………………iv CONTENTS v LIST OF FIGURES viiii LIST OF TABLES xii Chapter 1 Introduction 1 1.1 Motivation 1 1.2 Literature Review 4 1.2.1 Fabrication Methods of Silicon-Cored Fibers………………………..4 1.2.2 Silicon-Based Whispering Gallery Modes Resonators………………7 1.3 Organization of the Thesis………………………………………………….16 Chapter 2 Fabrication of Si-cored fibers and Their Optical, Material Characteristics…………………………………………………………17 2.1 Fabrication of Silicon-Cored Fibers………………………………………..17 2.1.1 Fabrication Process…………………………………………………17 2.1.2 Element Analysis by Using Energy Dispersive Spectroscopy……...27 2.2 Material Characteristics of Silicon-Cored Fibers……………………….….30 2.2.1 Raman Scattering Spectrum………………………………………...30 2.2.2 HR-TEM Image…………………………………………………….34 2.3 Optical Characteristics of Silicon-Cored Fibers……………………………36 2.4 Summary 41 Chapter 3 Fabrication and Optical Characteristics of Silicon-Cored Tapered Fibers ………………………………………………………………......42 3.1 Introduction to Silicon-Cored Tapered Fibers 42 3.2 Fabrication of Silicon-Cored Tapered Fibers 46 3.2.1 Setup of Miniaturized Fiber Drawing Tower……………………….46 3.2.2 Fabrication Process of Silicon-Cored Tapered Fibers………………51 3.3 Optical Characteristics on Silicon-Cored Tapered Fibers 56 3.3.1 The Number of Guided Modes………………………………….…..56 3.3.2 Loss Measurement of Silicon-Cored Tapered Fibers……………….59 3.4 Summary 61 Chapter 4 Theory, Fabrication and Optical Characteristics of Silicon Microsphere Whispering Gallery Modes Resonator 63 4.1 Theory of Whispering Gallery Modes 63 4.1.1 Introduction of Whispering Gallery Modes…………………………63 4.1.2 Optical Modes of Microsphere Resonator…………………….…….66 4.1.3 Quality Factor………………………………………………………68 4.2 Fabrication of Silicon Microsphere Resonators 69 4.3 Optical Characteristics of Silicon Microsphere Resonators 74 4.3.1 Tapered Fiber Coupling Method……………………………………74 4.3.2 Whispering Gallery Resonance in Silicon Microsphere……………80 4.3.3 Thermo-Optic Effect Induced by Absorption of Incident Power……83 4.4 Summary 85 Chapter 5 Conclusions and Future Work 86 5.1 Conclusions………………………………………………………………..86 5.2 Future Work………………………………………………………………..87 References 88 | |
dc.language.iso | en | |
dc.title | 使用矽核光纖製作具有高品質因子迴音廊模態之矽微米球共振腔 | zh_TW |
dc.title | Fabrication of Si Microsphere Resonators with High Q Whispering Gallery Modes by Using Si-cored Fibers | en |
dc.type | Thesis | |
dc.date.schoolyear | 103-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 胡振國(Jenn-Gwo Hwu),毛明華(Ming-Hua Mao) | |
dc.subject.keyword | 矽核光纖,矽微米球共振腔,迴音廊模態,高品質因子, | zh_TW |
dc.subject.keyword | silicon-cored fiber,silicon microsphere resonator,whispering gallery modes,high quality factor, | en |
dc.relation.page | 94 | |
dc.rights.note | 同意授權(全球公開) | |
dc.date.accepted | 2015-02-12 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-104-1.pdf | 4.05 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。