請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/39531
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 賴喜美 | |
dc.contributor.author | Yuan-Jung Hsieh | en |
dc.contributor.author | 謝元容 | zh_TW |
dc.date.accessioned | 2021-06-13T17:30:58Z | - |
dc.date.available | 2016-09-20 | |
dc.date.copyright | 2011-09-20 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-08-19 | |
dc.identifier.citation | 張立德、牟季美。(1994)。奈米材料科學。沈陽:遼寧科技出版社。
陳憲偉。(2004)。柯揚船 皮特˙斯壯主編。聚合物-無機奈米複合材料。台北:五南圖書出版公司。 鍾依林。(2009)。國立台灣大學農業化學系研究所碩士論文。 AACC. (2000). Approved method of the American Association of Cereal Chemist. 10th ed. Minnesota: AACC. Abareshi, M., Zebarjad, S. M., & Goharshadi, E. K. (2010). Study of the morphology and granulometry of polyethylene-clay nanocomposite powders. Journal of Vinyl & Additive Technology, 16(1), 90-97. Ahn, D. C., Khait, K., & Petrich, M. A. (1995). Microstructural changes in homopolymers and polymer blends induced by elastic strain pulverization. Journal of Applied Polymer Science, 55(10), 1431-1440. Alexandre, M., & Dubois, P. (2000). Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Materials Science & Engineering R-Reports, 28(1-2), 1-63. Aranda, P., & Ruizhitzky, E. (1992). Poly(ethylene oxide)-silicate intercalation materials. Chemistry of Materials, 4(6), 1395-1403. ASTM Standard D6400-04, “Standard Specification for Compostable Plastics,” ASTM International, West Conshohocken, PA, www.astm.org (last accessed October 2008) ASTM Standard D882–10, “Standard Test Method for Tensile Properties of Thin Plastic Sheeting,” ASTM International, West Conshohocken, PA, www.astm.org (last accessed October 2010) ASTM Standard E96/E96M–05, “Standard Test Methods for Water Vapor Transmission of Materials,” ASTM International, West Conshohocken, PA, www.astm.org (last accessed October 2005) Auras, R., Harte, B., & Selke, S. (2004). An overview of polylactides as packaging materials. Macromolecular Bioscience, 4(9), 835-864. Avella, M., De Vlieger, J. J., Errico, M. E., Fischer, S., Vacca, P., & Volpe, M. G. (2005). Biodegradable starch/clay nanocomposite films for food packaging applications. Food Chemistry, 93(3), 467-474. Avella, M., Errico, M. E., Laurienzo, P., Martuscelli, E., Raimo, M., & Rimedio, R. (2000). Preparation and characterisation of compatibilised polycaprolactone/starch composites. Polymer, 41(10), 3875-3881. Benjamin, J. S. (1970). Dispersion strengthened superalloys by mechanical alloying. Metallurgical Transactions, 1(10), 2943-&. Bordes, P., Pollet, E., & Averous, L. (2009). Nano-biocomposites: biodegradable polyester/nanoclay systems. Progress in Polymer Science, 34(2), 125-155. Buchanan, R. A., Kwolek, W. F., Katz, H. C., & Russell, C. R. (1971). Starch in rubber - influence of starch type and concomitant variables in reinforcement of styrene-butadiene rubbers. Starke, 23(10), 350-&. Buleon, A., Colonna, P., Planchot, V., & Ball, S. (1998). Starch granules: structure and biosynthesis. International Journal of Biological Macromolecules, 23(2), 85-112. Cartier, L., Okihara, T., Ikada, Y., Tsuji, H., Puiggali, J., & Lotz, B. (2000). Epitaxial crystallization and crystalline polymorphism of polylactides. Polymer, 41(25), 8909-8919. Castricum, H. L., Yang, H., Bakker, H., & VanDeursen, J. H. (1997). A study of milling of pure polymers and a structural transformation of polyethylene. Synthesis and Properties of Mechanically Alloyed and Nanocrystalline Materials, Pts 1 and 2 - Ismanam-96, 235-, 211-216. Cavalieri, F., Padella, F., & Bourbonneux, S. (2002). High-energy mechanical alloying of thermoplastic polymers in carbon dioxide. Polymer, 43(4), 1155-1161. Chivrac, F., Pollet, E., & Averous, L. (2009). Progress in nano-biocomposites based on polysaccharides and nanoclays. Materials Science & Engineering R-Reports, 67(1), 1-17. Chivrac, F., Pollett, E., Schmutz, M., & Averous, L. (2008). New approach to elaborate exfoliated starch-based nanobiocomposites. Biomacromolecules, 9(3), 896-900. Choudalakis, G., & Gotsis, A. D. (2009). Permeability of polymer/clay nanocomposites: A review. European Polymer Journal, 45(4), 967-984. Chrastil, J. (1987). Improved colorimetric determination of amylose in starches or flours. American Chemical Society, 121, 1399-1400. Coltelli, M. B., Della Maggiore, I., Bertold, M., Signori, F., Bronco, S., & Ciardelli, F. (2008). Poly(lactic acid) properties as a consequence of poly(butylene adipate-co-terephthalate) blending and acetyl tributyl citrate plasticization. Journal of Applied Polymer Science, 110(2), 1250-1262. Courgneau, C., Domenek, S., Guinault, A., Averous, L., & Ducruet, V. (2011). Analysis of the structure-properties relationships of different multiphase systems based on plasticized poly(lactic acid). Journal of Polymers and the Environment, 19(2). Crosby, A. J., & Lee, J. Y. (2007). Polymer nanocomposites: the 'nano' effect on mechanical properties. Polymer Reviews, 47(2), 217-229. Eckel, D. F., Balogh, M. P., Fasulo, P. D., & Rodgers, W. R. (2004). Assessing organo-clay dispersion in polymer nanocomposites. Journal of Applied Polymer Science, 93(3), 1110-1117. Font, J., Muntasell, J., & Cesari, E. (1999). Poly(butylene terephthalate) poly(ethylene terephthalate) mixtures formed by ball milling. Materials Research Bulletin, 34(1), 157-165. Fritz, H. G., & Widmann, B. (1993). Native starch used for modification of synthetic-polymers. Starch-Starke, 45(9), 314-322. Frost, K., Kaminski, D., Kirwan, G., Lascaris, E., & Shanks, R. (2009). Crystallinity and structure of starch using wide angle X-ray scattering. Carbohydrate Polymers, 78(3), 543-548. Gai, J. G., & Li, H. L. (2007). Influence of organophilic montmorillonite and polypropylene on the rheological behaviors and mechanical properties of ultrahigh molecular weight polyethylene. Journal of Applied Polymer Science, 105(3), 1200-1209. Giannelis, E. P. (1996). Polymer layered silicate nanocomposites. Advanced Materials, 8(1), 29-&. Gorrasi, G., Sarno, M., Di Bartolomeo, A., Sannino, D., Ciambelli, P., & Vittoria, V. (2007). Incorporation of carbon nanotubes into polyethylene by high energy ball milling: Morphology and physical properties. Journal of Polymer Science Part B-Polymer Physics, 45(5), 597-606. Hoogsteen, W., Postema, A. R., Pennings, A. J., Tenbrinke, G., & Zugenmaier, P. (1990). Crystal-structure, conformation, and morphology of solution-spun poly(l-lactide) fibers. Macromolecules, 23(2), 634-642. Huang, M. F., Yu, J. G., & Ma, X. F. (2004). Studies on the properties of Montmorillonite-reinforced thermoplastic starch composites. Polymer, 45(20), 7017-7023. Huang, Z. Q., Lu, J. P., Li, X. H., & Tong, Z. F. (2007). Effect of mechanical activation on physico-chemical properties and structure of cassava starch. Carbohydrate Polymers, 68(1), 128-135. Jacobsen, S., & Fritz, H. G. (1996). Filling of poly(lactic acid) with native starch. Polymer Engineering and Science, 36(22), 2799-2804. Jacobsen, S., & Fritz, H. G. (1999). Plasticizing polylactide - the effect of different plasticizers on the mechanical properties. Polymer Engineering and Science, 39(7), 1303-1310. Kang, H., Jo, C., Lee, N. Y., Kwon, J. H., Byun, M. Y. (2005). A combination of gamma irradiation and CaCl2 immersion for a pectin-based biodegradable film. Carbohydrate Polymers, 60, 547–551. Katz, H. C., Kwolek, W. F., Buchanan, R. A., Doane, W. M., & Russell, C. R. (1974). Derivatives of high-amylose starch xanthate in rubber - influence of amylose content of starch upon water resistance of starch-reinforced styrene-butadiene rubbers. Starke, 26(6), 201-206. Katz, H. C., Kwolek, W. F., Buchanan, R. A., Doane, W. M., & Russell, C. R. (1976). High-amylose starch xanthides in rubber - effect of coupling agent and filler on properties of starch reinforced styrene-butadiene rubbers. Starke, 28(6), 211-215. Koenig, M. F., & Huang, S. J. (1995). Biodegradable Blends and Composites of Polycaprolactone and Starch Derivatives. Polymer, 36(9), 1877-1882. Kozlowski, M., Masirek, R., Piorkowska, E., & Gazicki-Lipman, M. (2007). Biodegradable blends of poly(L-lactide) and starch. Journal of Applied Polymer Science, 105(1), 269-277. Kuzuya, M., Yamauchi, Y., & Kondo, S. (1999). Mechanolysis of glucose-based polysaccharides as studied by electron spin resonance. Journal of Physical Chemistry B, 103(38), 8051-8059. Laohakunjit, N., & Noomhorm, A. (2004). Effect of plasticizers on mechanical and barrier properties of rice starch film. Starch-Starke, 56(8), 348-356. Laoutid, F., Bonnaud, L., Alexandre, M., Lopez-Cuesta, J. M., & Dubois, P. (2009). New prospects in flame retardant polymer materials: From fundamentals to nanocomposites. Materials Science & Engineering R-Reports, 63(3), 100-125. Lim, S. T., Jane, J. L., Rajagopalan, S., & Seib, P. A. (1992). Effect of starch granule size on physical-properties of starch-filled polyethylene film. Biotechnology Progress, 8(1), 51-57. Lopez-Rubio, A., Flanagan, B. M., Gilbert, E. P., & Gidley, M. J. (2008). A novel approach for calculating starch crystallinity and its correlation with double helix content: A combined XRD and NMR study. Biopolymers, 89(9), 761-768. Mangiacapra, P., Gorrasi, G., Sorrentino, A., & Vittoria, V. (2006). Biodegradable nanocomposites obtained by ball milling of pectin and montmorillonites. Carbohydrate Polymers, 64(4), 516-523. Manners, D. J. (1989). Recent developments in our understanding of amylopectin structure. Carbohydrate Polymers, 11(2), 87-112. Martin, O., & Averous, L. (2001). Poly(lactic acid): plasticization and properties of biodegradable multiphase systems. Polymer, 42(14), 6209-6219. Nesarikar, A. R., Carr, S. H., Khait, K., & Mirabella, F. M. (1997). Self-compatibilization of polymer blends via novel solid-state shear extrusion pulverization. Journal of Applied Polymer Science, 63(9), 1179-1187. Pan, J., & Shaw, W. J. D. (1994). Properties of a mechanically processed polymeric material. Journal of Applied Polymer Science, 52(4), 507-514. Pan, J., & Shaw, W. J. D. (1995). Effects of processing parameters on material properties of mechanically processed polyamide. Journal of Applied Polymer Science, 56(5), 557-566. Pan, P. J., Zhu, B., Dong, T., & Inoue, Y. (2008). Poly(l-lactide)/layered double hydroxides nanocomposites: preparation and crystallization behavior. Journal of Polymer Science Part B-Polymer Physics, 46(20), 2222-2233. Paul, D. R., & Robeson, L. M. (2008). Polymer nanotechnology: nanocomposites. Polymer, 49(15), 3187-3204. Paul, M. A., Alexandre, M., Degee, P., Henrist, C., Rulmont, A., & Dubois, P. (2003). New nanocomposite materials based on plasticized poly(L-lactide) and organo-modified montmorillonites: thermal and morphological study. Polymer, 44(2), 443-450. Pavlidou, S., & Papaspyrides, C. D. (2008). A review on polymer-layered silicate nanocomposites. Progress in Polymer Science, 33(12), 1119-1198. Perego, G., Cella, G. D., & Bastioli, C. (1996). Effect of molecular weight and crystallinity on poly(lactic acid) mechanical properties. Journal of Applied Polymer Science, 59(1), 37-43. Petinakis, E., Yu, L., Edward, G., Dean, K., Liu, H. S., & Scully, A. D. (2009). Effect of matrix-particle interfacial adhesion on the mechanical properties of poly(lactic acid)/wood-flour micro-composites. Journal of Polymers and the Environment, 17(2), 83-94. Pinnavaia, T. J., Lan, T., & Kaviratna, P. D. (1996). Epoxy-clay hybrid nanocomposites: mechanism of nanolayer exfoliation and performance properties. Abstracts of Papers of the American Chemical Society, 211, 517-INOR. Pluta, M., Paul, M. A., Alexandre, M., & Dubois, P. (2006). Plasticized polylactide/clay nanocomposites. II. The effect of aging on structure and properties in relation to the filler content and the nature of its organo-modification. Journal of Polymer Science Part B-Polymer Physics, 44(2), 312-325. Rhim, J. W., Ng, P. K. W. (2007). Natural biopolymer-based nanocomposite films for packaging applications. Critical Reviews in Food Science and Nutrition, 47, 411–433. Rhim, J. W., Lee, J. H., Kwak, H. S. (2005). Mechanical and barrier properties of soy protein and clay mineral composite films. Food Science and BWiotechnology, 14, 112–116. Rowlands, S. A., Hall, A. K., Mccormick, P. G., Street, R., Hart, R. J., Ebell, G. F., & Donecker, P. (1994). Destruction of toxic materials. Nature, 367(6460), 223-223. Sarasua, J. R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998). Crystallization and melting behavior of polylactides. Macromolecules, 31(12), 3895-3905. Sasaki, S., & Asakura, T. (2003). Helix distortion and crystal structure of the alpha-form of poly(L-lactide). Macromolecules, 36(22), 8385-8390. Shaw, W. J. D. (1998). Current understanding of mechanically alloyed polymers. Mechanically Alloyed, Metastable and Nanocrystalline Materials, Part 1, 269-2, 19-29. Singh, J., & Singh, N. (2003). Studies on the morphological and rheological properties of granular cold water soluble corn and potato starches. Food Hydrocolloids, 17(1), 63-72. Siparsky, G. L., Voorhees, K. J., Dorgan, J. R., & Schilling, K. (1997). Water transport in polylactic acid (PLA), PLA/polycaprolactone copolymers, and PLA polyethylene glycol blends. Journal of Environmental Polymer Degradation, 5(3), 125-136. Smith, A. P., Shay, J. S., Spontak, R. J., Balik, C. M., Ade, H., Smith, S. D., & Koch, C. C. (2000). High-energy mechanical milling of poly(methyl methacrylate), polyisoprene and poly(ethylene-alt-propylene). Polymer, 41(16), 6271-6283. Sorrentino, A., Gorrasi, G., Tortora, M., Vittoria, V., Costantino, U., Marmottini, F., & Padella, F. (2005). Incorporation of Mg-Al hydrotalcite into a biodegradable poly (epsilon, caprolactone) by high energy ball milling. Polymer, 46(5), 1601-1608. Suryanarayana, C. (2001). Mechanical alloying and milling. Progress in Materials Science, 46(1-2), 1-184. Tang, X. Z., Alavi, S., & Herald, T. J. (2008). Barrier and mechanical properties of starch-clay nanocomposite films. Cereal Chemistry, 85(3), 433-439. Tester, R. F., Karkalas, J., & Qi, X. (2004). Starch - composition, fine structure and architecture. Journal of Cereal Science, 39(2), 151-165. Vaia, R. A., Vasudevan, S., Krawiec, W., Scanlon, L. G., & Giannelis, E. P. (1995). New polymer electrolyte nanocomposites - melt intercalation of poly(ethylene oxide) in mica-type silicates. Advanced Materials, 7(2), 154-156. Vertuccio, L., Gorrasi, G., Sorrentino, A., & Vittoria, V. (2009). Nano clay reinforced PCL/starch blends obtained by high energy ball milling. Carbohydrate Polymers, 75(1), 172-179. Wang, H., Sun, X. Z., & Seib, P. (2001). Strengthening blends of poly(lactic acid) and starch with methylenediphenyl diisocyanate. Journal of Applied Polymer Science, 82(7), 1761-1767. Willett, J. L. (1994). Mechanical-properties of ldpe granular starch composites. Journal of Applied Polymer Science, 54(11), 1685-1695. Yoo, S. H., & Jane, J. L. (2002). Molecular weights and gyration radii of amylopectins determined by high-performance size-exclusion chromatography equipped with multi-angle laser-light scattering and refractive index detectors. Carbohydrate Polymers, 49(3), 307-314. Zhang, J. F., & Sun, X. Z. (2004a). Mechanical and thermal properties of poly(lactic acid)/starch blends with dioctyl maleate. Journal of Applied Polymer Science, 94(4), 1697-1704. Zhang, J. F., & Sun, X. Z. (2004b). Mechanical properties of poly(lactic acid)/starch composites compatibilized by maleic anhydride. Biomacromolecules, 5(4), 1446-1451. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/39531 | - |
dc.description.abstract | 本試驗以聚乳酸(poly(lactic acid), PLA)及澱粉為材料,聚乙二醇(poly(ethylene glycol, PEG)為塑化劑,添加不同含量之天然或有機修飾蒙特石(montmorillonite)作為填料,經由球磨處理後熱壓製備複合膜,並探討球磨處理、蒙特石種類及蒙特石添加量對聚乳酸-澱粉複合材料性質的影響。以掃描式電子顯微鏡觀察複合材料中澱粉之顆粒形態、界面及分散情形,穿透式電子顯微鏡觀察蒙特石分散情形,X光繞射及小角度X光散射分析複合膜之蒙特石分布形態及結晶結構。結果顯示,球磨處理能使蒙特石失去整齊排列結構並分散於複合材料中;澱粉顆粒在球磨過程中變形程度則受到蒙特石的添加以及蒙特石層間是否有有機分子修飾的影響。此外,由於聚乙二醇傾向吸附在蒙特石晶層表面,蒙特石在材料中的形態、添加量及是否有有機分子修飾會決定聚乙二醇在材料中的分布。複合膜中聚乳酸的結晶結構並不會受到蒙特石添加或球磨處理影響。測定複合材料之機械性質與水氣通透性(water vapor permeability, WVP)得知,機械性質與水氣通透性與複合材料中澱粉、蒙特石及聚乙二醇之形態及分布有相關性,其中以添加3%有機修飾蒙特石、球磨處理4 hr之聚乳酸-澱粉複合材料之楊氏模數提升及水氣通透效果降低最為顯著,但其斷裂延伸率及拉伸強度則降低最多。 | zh_TW |
dc.description.abstract | Different amounts of montmorillonite (MMT) or organomodified montmorillonite (OMMT) were incorporated into a poly(lactic Acid)-starch (PLA-starch) composite film by means of ball milling and hot pressed, which used poly(ethylene glycol) (PEG) as the plasticizer. The effects of ball milling conditions, types of MMT and MMT contents on the morphology and properties of PLA-starch composite were discussed. Scanning electron microscopy (SEM) was used to study the morphology, surface and distribution of starch granules in the composite films. The distribution of MMT in the composite films was investigated by transmission electron microscopy (TEM). X-ray diffraction (XRD) and small angle X-ray scattering (SAXS) was used to analyze the morphology of MMT and the crystalline structure of the composite films. The results shows that the dispersion of clay minerals could be improved by the ball milling treatment, while the effects of ball milling treatment on the morphology and the dispersion of starch were influenced by the addition of MMT and OMMT. Besides, due to that PEG tending to be adsorbed on the surface of MMT, the morphology, type and content of MMT dominated the distribution of PEG in the composite films. The mechanical and water vapor permeability (WVP) properties of the composite films were influenced by the morphologies and distributions of starch, MMT and PEG. The best composite films in terms of Young’s modulus and WVP could be obtained by adding 3% OMMT and 4 hr ball milling or adding 1.5% OMMT and 8 hr ball milling, but the tensile strength and elongation of the composite films decreased the most. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T17:30:58Z (GMT). No. of bitstreams: 1 ntu-100-R98623011-1.pdf: 5964151 bytes, checksum: 8abef1dc458f420434449270162c7112 (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 謝誌 i
中文摘要 ii Abstract iii 目錄 iv 圖目錄 vi 表目錄 ix 第一章 前言 1 第二章 文獻整理 2 一、 生物可分解材料 2 (一) 澱粉 2 (二) 聚乳酸 4 二、 高分子-黏土礦物複合材料 6 (一) 黏土礦物與蒙特石 6 (二) 高分子-黏土礦物複合材料之結構與性質 7 (三) 高分子-黏土礦物複合材料之製備方法 9 三、 高能球磨處理於複合材料製備之應用 9 第三章 材料與方法 12 一、 試驗架構 12 二、 材料與試劑 12 三、 製備方法 13 (一) 聚乳酸粉末製備 13 (二) 複合材料粉末製備---球磨處理 13 (三) 複合膜之製備---熱壓處理 15 四、 檢測與分析方法 16 (一) 形態觀察 16 1. 厚度測定 16 2. 廣角度X光繞射分析 16 3. 小角度X光散射分析 16 4. 穿透式電子顯微鏡觀察 16 5. 掃描式電子顯微鏡觀察 17 (二) 薄膜性質檢測 17 1. 機械性質測定 17 2. 水氣通透性質測定 17 (三) 統計分析 18 第四章 結果與討論 19 一、 聚乳酸-澱粉複合膜之結構與性質 19 (一) 外觀 19 (二) 顯微結構 19 (三) 結晶結構 23 (四) 機械性質 26 (五) 水氣通透性質 28 二、 聚乳酸-澱粉-天然蒙特石複合膜之結構與性質 29 (一) 外觀 29 (二) 顯微結構 30 1. 蒙特石形態 30 2. 澱粉顆粒形態、界面及分散情形 32 3. 天然蒙特石分布情形 37 (三) 結晶結構 39 (四) 機械性質 42 (五) 水氣通透性質 44 三、 聚乳酸-澱粉-有機修飾蒙特石複合膜之結構與性質 45 (一) 外觀 45 (二) 顯微結構 46 1. 蒙特石形態 46 2. 澱粉顆粒形態、界面及分散情形 49 3. 有機修飾蒙特石分布情形 53 (三) 結晶結構 55 (四) 機械性質 57 (五) 水氣通透性質 59 四、 聚乳酸-澱粉、聚乳酸-澱粉-天然蒙特石及聚乳酸-澱粉-有機修飾蒙特石複合膜之比較 60 第五章 結論 63 第六章 參考文獻 65 | |
dc.language.iso | zh-TW | |
dc.title | 添加蒙特石及球磨處理對聚乳酸-澱粉複合材料之影響 | zh_TW |
dc.title | Effect of Montmorillonite and Ball-Milling Treatment on Poly(lactic Acid)-Starch Composite | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 謝國煌,賴麗旭,李文獻 | |
dc.subject.keyword | 聚乳酸-澱粉-蒙特石複合材料,球磨處理,機械性質,水氣通透性, | zh_TW |
dc.subject.keyword | PLA-starch-MMT composite,ball milling,mechanical property,water vapor permeability, | en |
dc.relation.page | 72 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2011-08-20 | |
dc.contributor.author-college | 生物資源暨農學院 | zh_TW |
dc.contributor.author-dept | 農業化學研究所 | zh_TW |
顯示於系所單位: | 農業化學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 5.82 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。